These uniform grids are from 2012 and have been modified to fit watertable at top. The xy spacing is regular, but vertical spacing is stretched to meet watertable. Mesh extents: ATTRIBUTE MIN MAX DIFFERENCE xic 5.485000000E+05 5.535000000E+05 5.000000000E+03 yic 4.119800000E+06 4.124800000E+06 5.000000000E+03 zic 0.000000000E+00 1.366789673E+03 1.366789673E+03 mesh 026 has 15625 elements, xy spacing is 200m, z spacing is near 51.5 mesh 051 has 125000 elements, xy spacing is 100m, z spacing is near 25.6 mesh 101 has 1000000 elements, xy spacing is 50m, z spacing is near 12.8 Mesh with EV zones grouped into 8 materials and 6 faults Size 15625 mesh_026_fit_wt_6flts/ Size 125000 mesh_051_fit_wt_6flts/ Size 1000000 mesh_101_fit_wt_6flts/ Mesh with EV zones grouped into 8 materials and 5 faults (Fault BU removed) Size 15625 mesh_026_fit_wt_5flts/ Size 125000 mesh_051_fit_wt_5flts/ Size 1000000 mesh_101_fit_wt_5flts/ These are large and have not been processed yet. Size 8000000 mesh_201_fit_wt_6flts/ Size 64000000 mesh_401_fit_wt_6flts/ MODEL FILES are in local directory /scratch/nts/tam/pahute_mesa/mesh_2014_uniform mesh_final_bc.exo - Exodus binary file with boundary facesets 1-6 1=bottom 2=top 3=east 4=north 5=west 6=south mesh_final.exo - Exodus binary file with no boundary facesets mesh_final.gmv - GMV binary format mesh_final.inp - AVS ascii format mesh_materials.txt - List of Exodus Block ID, HSU ID, and cell counts ************* Summary Mesh Materials *************** For each of 026, 051, and 101 the property ID's are 1 to 8 with top cell ID's from 9-24. Faults have ID 30. (Exodus properties add 0000 to number ID). The coarse mesh has 16 exodus blocks, 051 and 101 have 17 blocks. Does not exist: 23 TE VA1 Does not exist: 22 TE VA2 Does not exist: 21 TE VA3 Does not exist: 17 TE B_CH Does not exist: 14 TW VA2 Does not exist: 11 TW VA5 Does not exist: 9 TW B_CH Does not exist: 6 VA2 Block ID HSU ID Name 17 30 Fault 16 24 TE A_CH 15 20 TE VA4 14 19 TE VA5 (Missing in coarse 026 mesh) 13 18 TE CH 12 16 TW A_CH 11 15 TW VA1 10 13 TW VA3 9 12 TW VA4 8 10 TW CH 7 8 A_CH 6 7 VA1 5 5 VA3 4 4 VA4 3 3 VA5 2 2 CH/CHZCM 1 1 B_CH ------------------------------------------------------------------------ Source HSU and Fault surfaces Fault surfaces and HSU definitions from Earthvision Model sent by Tim Vogt Supporting Navarro-Intera, LLC contracted to the U.S. Department of Energy, NNSA Nevada Field Office 702-295-2057 office 702-994-2489 cell Tim.vogt@nv.doe.gov March 05, 2014 2:25 PM Download location https://ugta.nv.doe.gov/sites/EarthVision/VisualizationLibrary/20140305_for_LANL.tar Local: Interpolation from .seq file /scratch/nts/ev_models/HFM_PM_20140305/ Final fault surfaces are created and written in /scratch/nts/ev_models/HFM_PM_20140305/fault View files for analysis and images added to /scratch/nts/ev_models/HFM_PM_20140305/faces Support and analysis of area fault and geology: From: Drellack, Sigmund Sent: Monday, March 31, 2014 2:04 PM To: Miller, Terry A; Vogt, Tim (CONTR) Cc: Harp, Dylan R Subject: RE: ETCSZ fault with respect to geology Terry, The ETCSZ is one of several caldera structural margins to the Silent Canyon caldera complex (SCCC). The SCCC is comprised of an older Grouse Canyon caldera and the younger Area 20 caldera. The W-E ETCSZ is the southern boundary for the Grouse Canyon Inner Collapse (collapse down on the north side) and the northern boundary for the Area 20 outer Collapse (down on the south side). As such we conceptualized this structure as being vertical. But, the model does not allow truly vertical structures, so in the HFM it is not perfectly vertical. The top of the ETCSZ should be the top of the Inlet Aquifer (IA) HSU on the south, and the top of the Crater Flat confining unit (CFCU) on the north. The top of the ETCSZ can also be defined as the base of the Calico Hills HSU(s) which overlies the IA and the CFCU. I hope this helps. Let me know if you have more questions. Sig Drellack National Security Technologies, LLC Contractor to the United States Department of Energy Mail Address Mail Stop NLV 082 P.O. Box 98521 Las Vegas, NV 89193-8521 Phone: 702-295-0170 FAX: 702-295-1313 E-mail: drellasl@nv.doe.gov ------------------------------------------------------------------------ Source grids These grids Start with uniform grids created for 2012 modeling by Dylan Harp. These grids are created with uniform spacing and are stretched vertically to fit the watertable surface. Each grid spacing is halved to create a set of coarse to fine grid resolutions. /scratch/er/dharp/projects/ugta/ascem/PahuteMesa/site_runs/mesh/uniform -rw-r--r-- 1 gable pf 1052832 Oct 31 2012 min_max_dxyz_026_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 8190300 Oct 31 2012 min_max_dxyz_051_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 64733900 Oct 31 2012 min_max_dxyz_101_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 514901432 Oct 31 2012 min_max_dxyz_201_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 4107555832 Nov 2 2012 min_max_dxyz_401_fit_wt_flts_nocon/mesh.exo Grids were created by Carl Gable in: /scratch/nts/gable/grid_gen/ascem/pahute_mesa/mesh/uniform -rw-r--r-- 1 gable pf 1052832 Oct 31 2012 min_max_dxyz_026_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 8190300 Oct 31 2012 min_max_dxyz_051_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 64733900 Oct 31 2012 min_max_dxyz_101_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 514901432 Oct 31 2012 min_max_dxyz_201_fit_wt_flts_nocon/mesh.exo -rw-r--r-- 1 gable pf 4107555832 Nov 2 2012 min_max_dxyz_401_fit_wt_flts_nocon/mesh.exo Source Watertable surface: The top of the grids align with this watertable surface. /scratch/nts/gable/grid_gen/ascem/pahute_mesa/data/water_table_01 -rw-r-xr-x 1 gable pf 3449276 Sep 25 2012 watertable_quads.gmv Subject:RE: Water table surface for Pahute Mesa U20WW area Date: Wed, 1 Aug 2012 06:06:08 -0700 From: Ruskauff, Greg (CONTR) To: Kwicklis, Edward M CC: Gable, Carl Walter The attached ArcGIS files are from Joe Fenelon's 2010 mapping of the NTS groundwater systems. The great thickness of the Calico Hills, coupled with the uncertainty in properties ought to make this a close enough approximation. Source HSU and Fault Surfaces: These data are overwritten with the PM Phase II HSU's and Faults and have no impact on the 2014 grids. /scratch/nts/gable/grid_gen/ascem/pahute_mesa/data/ver01/CHZCM_Lavas4LANL Files created and exported by Kevin Day 6/19/2012 Kevin.Day@nv.doe.gov Files are exported from chzcm_lavas.100x100x4.z10.unsliced.faces, an Earthvision model representing conceptualized distribution of lava flow aquifers within the Calico Hills Hydrostratigraphic Unit of the Pahute Mesa Phase I Hydrostratigraphic Framework Model. This export was produced within a polygon centered on well U20_WW, constrained on the top and bottom by the Calico Hills HSU and by UTM Zone 11 NAD 27 coordinates: X Y Minimum 548500 4119800 Maximum 554000 4125500 Range 5500 5700 Dimensions 111 115 Grid spacing 50 50 Files: CH.base.dat - base of Calico Hills HSU CH.surface.dat - top of Calico Hills HSU chzcm_lavas.pdat - distribution of 5 lava flow aquifers within CH, only lavas are included, empty space is assumed to be the Calico Hills matrix boxcar_wdcv2.dat / boxcar_wdcv2.tiploop.dat - Boxcar fault surface and tiploop polygon eastgreeley_wdcv2.dat / eastgreeley_wdcv2.tiploop.dat - East Greeley fault surface and tiploop polygon etcsz_wdc.dat / etcsz_wdc.tiploop.dat - East Thirsty Canyon Structural Zone fault surface and tiploop polygon ribcliffwdfull.dat / ribcliffwdfull.tiploop.dat - Ribbon Cliff Structural Zone fault surface and tiploop polygon westgreeley_wdc.dat / westgreeley_wdc.tiploop.dat - West Greeley fault surface and tiploop polygon ------------------------------------------------------------------------ Notes /scratch/er/dharp/projects/ugta/ascem_2014/pahute_mesa/mesh/prism_026 Files: face_set_prism.mlgi – uses variables defined in min_max_dxyz_prism_026.mlg to identify outside facesets make_mesh_fit_watertable_flts_fs_prism.lgi – main driver min_max_dxyz_prism_026.mlgi – defines variables Use same strategy and color finest grid once, then use as source grid for all others. Recolor EV zones and faults Group zones with same numbering scheme as 2012, write exodus files (grouped materials) Keep zone numbers from EV, write exodus files (all materials) EV fault files: /scratch/nts/ev_models/HFM_PM_20140305/fault Fault Files in this area for this model: Order from west to east 1 BX - Boxcar (barely touches west side of mesh) 2 BU - Buteo (full NS fault passing near U20) 3 SPMSZ - Southern Pahute Mesa Structural zone (EW cutting through SW corner) 4 WG - West Greeley (full NS, east of Buteo) 5 EG - East Greeley (full NS, east side of mesh) 6 ETCSZ - East Thirsty Canyon (EW dies out west of WG fault) These are nearby but do not intersect the mesh area: 7 RCSZ - Ribbon Cliff (dies out more than 100m west of domain) 8 SCSZW - Silent Canyon West (more than 500m north of domain) Interplated fault blocks for 50x50 grid resolution: 99 "below_WestBoxcar_S" FaultFile "fault/WB.2grd" 104 "below_WestBoxcar" FaultFile "fault/WB.2grd" 109 "above_Buteo_M" FaultFile "fault/BU.2grd" 110 "below_Buteo_M" FaultFile "fault/BU.2grd 111 "above_Buteo_S" FaultFile "fault/BU.2grd 112 "below_Buteo_S FaultFile "fault/BU.2grd" 116 "above_SCSZW_W" FaultFile "fault/SCSZW.2grd" 118 "above_SCSZW_MW" FaultFile "fault/SCSZW.2grd" 133 "above_EastGreeley_M" FaultFile "fault/EG.2grd" 134 "below_EastGreeley_M" FaultFile "fault/EG.2grd" Interpolate from EV model ========================================================= # link to source grid ln -s /scratch/er/dharp/projects/ugta/ascem/PahuteMesa/site_runs/mesh/uniform/min_max_dxyz_051_fit_wt/mesh.gmv mesh_2012.gmv # === Color grid using EV HFM === # write points representing cell centers (median points) lagrit < ev_write_hexdat.lgi cp outx3dgen ev_write_hexdat.out.txt cp logx3dgen ev_write_hexdat.log # add header to hex_elem.dat # Type: scattered data # Version: 7 # Format: free # Field: 1 pnode # Field: 2 x # Field: 3 y # Field: 4 z meters # End: cp hex_elem.dat /scratch/nts/ev_models/HFM_PM_20140305 ####### work in EV directory ev_label -m model.seq -i hex_elem.dat -o ev_label_pts.dat -suppress VolumeIndex # GET ZONE ID awk 'NR==FNR{a[$2]=$1;next}{if($4=="Zone"){print"# Field: 6 Zone integer";next;}for(i in a)gsub(i,a[i]);print}' ZoneLookup.txt ev_label_pts.dat >! hex_pts_ev.dat # GET FAULT BLOCK ID awk 'NR==FNR{a[$2]=$1;next}{if($4=="Zone"){print"# Field: 6 Zone integer";next;}for(i in a)gsub(i,a[i]);print}' BlockLookup.txt hex_pts_ev.dat >! tmp.dat mv tmp.dat hex_pts_ev.dat ####### work in grid directory cp /scratch/nts/ev_models/HFM_PM_20140305/hex_pts_ev.dat . head -50 hex_pts_ev.dat awk '{if ($1 != "#") print $2,$3,$4,$6 }' hex_pts_ev.dat > hex_pts_ev_xyzid.dat awk '{if ($1 != "#") print $2,$3,$4,$6,$5 }' hex_pts_ev.dat > hex_pts_ev_attr.dat # color mesh elements with EV colors lagrit < ev_clrhex.lgi cp outx3dgen ev_clrhex.out.txt cp logx3dgen ev_clrhex.log # recolor and group for total of 30 materials # save EV colors lagrit < hex_recolor.lgi cp outx3dgen hex_recolor.out.txt cp logx3dgen hex_recolor.log # write exo files # use lagrit to write mesh zone and stats lagrit < mesh_mats.lgi cp outx3dgen mesh_mats.out.txt # use script to write material summary table awk -f show_mats.awk mesh_mats.out > mesh_materials.txt Fault surfaces are generated using EV data in /scratch/nts/ev_models/HFM_PM_20140305/fault Notes on EV data: Begin forwarded message: From: "Drellack, Sigmund" Date: March 28, 2014 3:52:18 PM MDT To: "Miller, Terry A" Cc: "Vogt, Tim (CONTR)" Subject: RE: Groupings of EV zones to 2012 materials Terry, You have it right, the IA is separate and is below the Calico Hills group of HSUs. Keep in mind that CHLFA1 through 5 are lava flows (we handled them as property models) within the CHZCM/CHCU HSU (~matrix). If you have other HSU/HFM/geology questions, feel free to ask. Sig Drellack National Security Technologies, LLC Contractor to the United States Department of Energy Mail Address Mail Stop NLV 082 P.O. Box 98521 Las Vegas, NV 89193-8521 Phone: 702-295-0170 FAX: 702-295-1313 E-mail: drellasl@nv.doe.gov From: Vogt, Tim (CONTR) Sent: Thursday, March 27, 2014 9:09 AM To: Drellack, Sigmund Cc: Miller, Terry A Subject: FW: Groupings of EV zones to 2012 materials Sig I think this is a question to which you can best respond. Thanks for your help. Tim From: Miller, Terry A [mailto:tamiller@lanl.gov] Sent: Thursday, March 27, 2014 7:39 AM To: Vogt, Tim (CONTR); Kwicklis, Edward M Cc: Birdsell, Kay H Subject: Groupings of EV zones to 2012 materials Hi Tim, I am working on correlation tables for 2014 HSU's to 2012 materials (1-8). See the attached table (page 1). These are my groupings based on what I see from the 2012 work. I am not sure if IA should be "below CH" or part of the CHZCM group. Let me know what you think. Forward this to anyone who should review. I will be adding more images with faults as I finish the meshes. Terry A. Miller LANL EES-16 505-667-8009 MESH Software https://lagrit.lanl.gov/ MESH Projects https://meshing.lanl.gov Begin forwarded message: From: "Harp, Dylan R" Date: January 27, 2014 9:45:12 AM MST To: "Miller, Terry A" Subject: Re: Location of last years ugta mesh Take a look at: /scratch/er/dharp/projects/ugta/ascem/PahuteMesa/site_runs/mesh/uniform In there look at the GMV and EXO files in: min_max_dxyz_026_fit_wt_flts/ min_max_dxyz_051_fit_wt_flts/ min_max_dxyz_101_fit_wt_flts/ min_max_dxyz_201_fit_wt_flts/ min_max_dxyz_401_fit_wt_flts/ -- Dylan R. Harp Computational Earth Sciences Group Earth and Environmental Sciences Division Los Alamos National Laboratory Phone: (505) 667-5532 Mail Stop T003 Fax: (505) 665-8737 Los Alamos National Laboratory -- From: Terry Miller Date: Mon, 27 Jan 2014 08:19:57 -0700 To: Dylan Harp Subject: Re: Location of last years ugta mesh Hi Dylan, I do not see a mesh in this directory, but there are many subdirectories with subset meshes. Can you check your location of modeling runs and see what mesh files you used? Do you have a directory with mesh images anywhere? Thank you, Terry On Jan 15, 2014, at 10:12 AM, Harp, Dylan R wrote: /scratch/nts/gable/grid_gen/ascem/pahute_mesa/mesh/uniform Dylan Harp, EES-16, 505-667-5532 Terry A. Miller LANL EES-16 505-667-8009 MESH Software https://lagrit.lanl.gov/ MESH Projects https://meshing.lanl.gov