SALT Borehole V1 and Zone Modifications:
All Images for Original V1 Mesh and Zones
Images showing Versions of Zone Changes
V1f README
V1e README
V1d README
V1c README
V1b README
V1 README
Zone Version v1f October 31 2018
/project/meshing/SALT/borehole/3D_stack_v1f
Use latest version Materials which adds packer v1e
Change OBS to TSB and TB aproximate locations
Materials A same as v1e with heater touching salt all sides
Materials B same as v1e with heater touching salt at 2 nodes
V1f README
Zone Version v1e September 5 2018
/project/meshing/SALT/borehole/3D_stack_v1e
All points of heater touching
Added packer material 8
Borehole test V1e Same as V1d with full 5 inch heater and new packer zone
Modified to fill 5 inch borehole with the heater zone and add new packer zone.
Packer location from Y= 1.6872 to 1.1792
Borehole air is now 5 inch air.
The heater is located from y= 2.3876 to 2.5908
V1e README
Zone Version v1d August 31 2018
/project/meshing/SALT/borehole/3D_stack_v1d
2 points of heater touching
No packer material 8
Borehole test V1d Same as V1c with smaller footer on heater
Modified to shift heater zones so heater has sits on salt.
This version has a 2 node heater footer instead of 4 nodes.
The 4 inch air is now 5 inch air.
The heater is located from y= 2.3876 to 2.5908
V1d README
Zone Version v1c August 16 2018
/project/meshing/SALT/borehole/3D_stack_v1c
The 4 inch air is modified to be 5 inch air.
Modified to shift heater zones so heater sits on salt with 4 nodes.
The heater is located at v1b location from y= 2.3876 to 2.5908
V1c README
Zone Version v1b April 11 2018
/project/meshing/SALT/borehole/3D_stack_v1b
Shift Heater from Y= 3.5052 to Y= 2.3876 meters.
Modified to shift heater zones forward closer to actual build location
The mesh remains the same, only the heater zone nodes are shifted.
V1b README
Version V1 Mesh with original Zones Feb 26 2017
Mesh for Borehole test
/project/meshing/SALT/borehole/3D_stack_v1
Borehole with radius 2 inches
2 observation nodes top 6 inches from borehole wall
2 observation nodes bottom 12 inches from borehole wall
MATERIAL ZONES
Material Block 1 has 223234 nodes. #nodes/nnodes is 0.937536478043
Material Borehole 2 has 14317 nodes. #nodes/nnodes is 0.601284280419E-01
Material top_left 3 has 139 nodes. #nodes/nnodes is 0.583771150559E-03
Material top_right 4 has 139 nodes. #nodes/nnodes is 0.583771150559E-03
Material bot_right 5 has 139 nodes. #nodes/nnodes is 0.583771150559E-03
Material bot_left 6 has 139 nodes. #nodes/nnodes is 0.583771150559E-03
Note: Borehole material is air and is 2m radius along full length regardless of heater.
This was a design mistake, cylinder of borehole radius should change to fit heater.
In this case the borehole (2 inch) is appropriate with the 2 inch heater.
HEATER ZONES
Heater Zone Length 8 inch (.2032m) y=3.5m to 3.7032
Heater from Y= 3.505 to 3.7084 and within 3 different radius lengths.
2 inch (.0508m) radius (grid .05042m)
Material 7 has 515 nodes. #nodes/nnodes is 0.216289306991E-02
2.5 inch (.0635m) radius (grid .06593m)
Material 8 has 690 nodes. #nodes/nnodes is 0.289785675704E-02
3 inch (.0762m) radius (grid .07582)
Material 9 has 865 nodes. #nodes/nnodes is 0.363282044418E-02
V1 README
All Images for Original V1 Mesh and Zones
Images of Versions of Zone Changes
