SALT CAN 2D and 3D SLICES V1 Octree with Smooth

Source: Canister and Instrumentation Locations 11092016.pdf
Source data inches, converted to meters for FEHM
Unstructured smooth mesh for can, salt pile, and room air.
Embedded in Octree Mesh spacing from .4064 to .0508 meters (16 inches to 2 inches).
Mesh Directory: /scratch/sft/tam/SALT/canister_peter/slice_v1

  README.txt

  Gallery of all images


  Zone CAN   1 (orange)  
  Zone SALT  2 (yellow) 
  Zone AIR   3 (blue)     
  Zone EDZ   4 (gray pink)     
  Zone ROCK  5 (brown) 

  Added Zone RIM 6 (these are nodes on outside rim of can, not inside)
  Adjusted SALT zone to extend straight to wall based on actual photos
  New material file is tet_new_material.zone

  Can center at 0,0 coordinate
  Can radius = .3048 meters (12 inches)
  distance from can to salt top = .6096 (24 inches)
  distance from wall to can = .6096 (24 inches)
  distance from can center to salt edge = 1.534 meters (60 inches)
  distance from wall to salt edge = 2.4384 meters (96 inches)
  distance from floor to ceiling = 2.4384 meters (96 inches)

  Extents:
   X   -6.6040  to 12.0904 meters  (-260 to 476 inches)  
   Z   -18.1864 to 18.3896 meters  (-716 to 724 inches)

  3D Slice with 3 stacked layers in Y direction
   Y   0 to .2 meters (0 to 3.937 inches) 

  2D Triangle Mesh
    nodes 9315
    elements 18353
    Minimum Voronoi area  =  1.0354787E-03
    Maximum Voronoi area  =  1.6516096E-01
    Total   Voronoi area:    6.8376637E+02

  3D Tet Mesh
    nodes 27945 
    elements 106136
    Voronoi Volume min =   5.1773935E-05                                    
    Voronoi Volume max =   1.6516096E-02                                    
    Total Voronoi Volume:  1.3675327E+02