*               * * * * * * * * * * * * * * * * * * * * * * * *                 
*               *                                             *                 
*               *    Program:  LaGriT V3.101   Linux m64      *                 
*               *    date_compile: 2013/04/25  RH gf4.5       *                 
*               *    Run Time: 2013/Oct 15  08:17:30          *                 
*               *    Manual:   http://lagrit.lanl.gov         *                 
*               *                                             *                 
*               * * * * * * * * * * * * * * * * * * * * * * * *                 
 
                               -----oOo-----                                    
                           LaGriT V3 LACC-2012-084                              
LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC
at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396   
with the U.S. Department of Energy (DOE). All rights in the program are reserved
by the DOE and Los Alamos National Security, LLC. Permission is granted to the  
public to copy and use this software without charge, provided that this Notice  
and any statement of authorship are reproduced on all copies. Neither the       
U.S. Government nor LANS makes any warranty, express or implied, or assumes     
any liability or responsibility for the use of this software.                   
                               -----oOo-----                                    
 
 
Output log file: outx3dgen                                                      
Command log file: logx3dgen                                                     
 
# create inner cylinder point distribution                                      
# these points are explicitly defined and added                                 
# to rim points for distibution that uses smoothing                             
# -------------------------------------                                         
# cylinder (well) object parameters                                             
# RLEN is 1st distance from center, 2nd distance                                
# NRAYS number of rays around the center or sections                            
# NRADIAl points to distribute in the R direction from R0 to R1                 
# Ratio factor so radial point will have dr_n = R_RATIO*dr_n-1                  
define ID_CYL 2                                                                 
define RLEN 0.0                                                                 
define NRAYS 8                                                                  
define NRADIAL 3                                                                
define R0 0.                                                                    
define R1 2.                                                                    
define R_RATIO 1.                                                               
cmo/create/mo///triplane                                                        
createpts/rtz/NRADIAL,NRAYS,1/R0,0.0,0.0/R1,360.,RLEN/1,1,1/1 0 0/R_RATIO 1.0 1.
0                                                                               
  RZ GENERATED POINTS                    1 TO                   24              
# remove duplicate points                                                       
filter/1 0 0                                                                    
 
FILTER:Use internal epsilonl value =   0.120932760242E-11                       
 
FILTER:Dudding      9 duplicate points.                                         
rmpoint/compress                                                                
         9 points removed and          0 elements removed.                      
   The new point count is        15.                                            
   The new element count is         0.                                          
# set imt value to 2 to distinquish from rest of well points                    
pset/pring/seq/0,0,0                                                            
 
 THE PSET  pring  HAS         15 POINTS                                         
cmo/setatt/mo/imt1/pset,get,pring/ID_CYL                                        
Warning: nelements = 0                                                          
        15 values reset for attribute imt1                                      
 
dump gmv cylinder_well.gmv mo                                                   
cmo/modatt/-def-/-def-/ioflag/x                                                 
finish                                                                          
dump avs2 cylinder_well.inp mo                                                  
cmo/modatt/-def-/-def-/ioflag/x                                                 
finish                                                                          
finish                                                                          
LaGriT successfully completed