* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.200 Linux m64 * * * date_compile: 2016/10/25 Ubu gf * * * Run Time: 2017/Feb 16 09:12:23 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # python generated script from Moulton mesh # modified to run outside of pylagrit # with checks and changes to workflow ##### STEP CREATE DEM and TOP SURFACE ####################### # this can be done once in DEM directory read/dem.avs/mo1 read/avs/dem.avs/mo1 cmo/status/brief The current-mesh-object(CMO) is: mo1 1 Mesh Object name: mo1 number of nodes = 24048 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish finish dump/dem.gmv/mo1 dump/gmv/dem.gmv/mo1 cmo/modatt/-def-/-def-/ioflag/x finish finish # define variables define DEBUG 0 define NX 144 define NY 167 define ZBOTTOM 2745. ### interpolate from tri version of mesh instead of nearest node ## # connect dem into tri surf cmo/addatt/mo1/z_save/vdouble/scalar/nnodes/linear/permanent//0.0 cmo/copyatt/mo1/mo1/z_save/zic Warning: nelements = 0 in cmo mo1 Warning: nelements = 0 in cmo mo1 24048 copied from mo1 zic to -> mo1 z_save cmo/setatt/mo1/zic/0.0 Warning: nelements = 0 24048 values reset for attribute zic cmo/create/motmp///triplane copypts/motmp mo1 cmo/addatt/motmp/z_save/VDOUBLE/scalar/nnodes/linear/permanent/agltn/0.0 finish copypts added nodes 1 to 24048 cmo delete mo1 Released Mesh Object: mo1 cmo move mo1 motmp cmo select mo1 filter 1,0,0 FILTER:Use internal epsilonl value = 0.486500692157E-10 FILTER:Dudding 0 duplicate points. rmpoint compress 0 points removed and 0 elements removed. The new point count is 24048. The new element count is 0. cmo/setatt/mo1/imt 1 Warning: nelements = 0 24048 values reset for attribute imt1 cmo/setatt/mo1/itp 0 Warning: nelements = 0 24048 values reset for attribute itp1 connect Coordinates of enclosing triangle are: -0.25025D+03-0.26560D+03 0.00000D+00 0.39325D+03-0.29050D+03 0.00000D+00 0.72215D+02 0.83000D+03 0.00000D+00 Successfully eliminated all multimaterial connections. The mesh is now complete! LaGriT FINISH: connect resetpts itp geniee finish cmo copy motmp mo1 cmo copyatt motmp motmp zic z_save 24048 copied from motmp z_save to -> motmp zic cmo printatt motmp zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.757962402E+03 2.766925537E+03 8.963134770E+00 24048 dump gmv dem_trisurf.gmv motmp cmo/modatt/-def-/-def-/ioflag/x finish cmo delete motmp Released Mesh Object: motmp # use uniform quad so when null data are removed shape is stair-step # and numbers are rounded nicely, not jiggy cmo/create/mo2/0/0/quad cmo select mo2 createpts/xyz/NX,NY,1/0.0,0.0,0.0/142.0,164.0,0/1,1,1/1,1,1 RZ GENERATED POINTS 1 TO 24048 cmo/status/mo2/brief The current-mesh-object(CMO) is: mo2 2 Mesh Object name: mo2 number of nodes = 24048 number of elements = 0 dimensions geometry = 3 element type = qua dimensions topology = 2 4 nodes 4 faces 4 edges boundary flag = 16000000 status = active createpts/brick/xyz/NX,NY,1/1,0,0/connect Number of nodes: 24048 Number of elements: 23738 Number of negative volume elements: 0 Total volume: 0.232880000000E+05 cmo/addatt/mo2/z_save/vdouble/scalar/nnodes/linear/permanent//0.0 ### interpolate z from tri version of mesh instead of nearest node ## # interpolate/voronoi/mo2/z_save/1,0,0/mo1/z_save interpolate/continuous/mo2 z_save/1,0,0/mo1/z_save nodes in indexed point set = 24048 INTRP METHOD: continuous FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.276792553711E+04 cmo select mo1 finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 1203 1204 1203 5 % 2405 2406 2405 10 % 3607 3608 3607 15 % 4809 4810 4809 20 % 6011 6012 6011 25 % 7213 7214 7213 30 % 8415 8416 8415 35 % 9617 9618 9617 40 % 10819 10820 10819 45 % 12021 12023 12021 50 % 13223 13225 13223 55 % 14425 14427 14425 60 % 15627 15629 15627 65 % 16829 16831 16829 70 % 18031 18033 18031 75 % 19233 19235 19233 80 % 20435 20437 20435 85 % 21637 21639 21637 90 % 22839 22841 22839 95 % 24041 24044 24041 100 % 24048 24051 24048 Total cmo select mo2 finish intrp/continuous done. cmo kdtree release cmo/DELATT/mo1/sbox finish cmo/DELATT/mo1/v12 finish cmo/DELATT/mo1/linkt finish cmo/DELATT/mo1/v2 finish finish cmo select mo2 pset/p1/attribute/z_save/1,0,0/-9999/eq THE PSET p1 HAS 0 POINTS eltset/e1/inclusive/pset/get/p1 rmpoint/element/eltset,get,e1 Dudded 0 points plus parents, and 0 elements removed. rmpoint/compress 0 points removed and 0 elements removed. The new point count is 24048. The new element count is 23738. resetpts/itp geniee finish cmo select mo2 cmo/copyatt/mo2/mo2/zic/z_save 24048 copied from mo2 z_save to -> mo2 zic # QUAD to 2 TRIANGLES hextotet/2/motmp/mo2 iremove_vol= 0 iremove_dup= 0 icheckpt= 1 Input Mesh type qua using option 2 Element Material ID, min/max/range: 1 1 0 Epsilon-dist, distmax, distmin: -1.2694879E-06 1.6115996E+00 9.7604877E-01 Epsilon-volume, volmax: 1.3434134E-06 1.3434134E+00 cmo/addatt/motmp/iign/vint/scalar/nnodes/-def-/-def-/gx/-def- finish WARNING: Volumes le zero not removed, nelements= 47476 No duplicate points WARNING: Duplicate points not removed, nnodes = 24048 cmo/delete/mo2 Released Mesh Object: mo2 cmo/copy/mo2 motmp cmo/delete/motmp Released Mesh Object: motmp cmo select mo2 # SET default materials and boundaries cmo/setatt/mo2/itetclr 1 47476 values reset for attribute itetclr cmo/setatt/mo2/imt 1 24048 values reset for attribute imt1 resetpts itp geniee finish setsize # CHECK for 1 piece with 1 exterior, no holes cmo select mo2 boundary_components/elements log/tty/off finish resetpts/itp geniee finish finish cmo/addatt/mo2/numbnd/vint/scalar/nnodes/linear/permanent/afgx/0/ finish cmo/addatt/mo2/id_numb/vint/scalar/nnodes/linear/permanent/afgx/0/ finish sort/-def-/index/-def-/ikey_tmp/numbnd cmo/addatt/mo2/ikey_tmp/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey_tmp finish CONNECTED COMPONENTS: 1 different exterior boundary components Set# Representitive Node # # Nodes in Set (numbnd_e(node#) attribute) 1 2 618 cmo/DELATT/mo2/ikey_tmp finish log/tty/on finish # CHECK surface normals (1=down, 2=up) cmo select mo2 cmo/addatt/mo2/unit_area_normal/xyz/anorm ADDATT/unit_area_normal: creating new attribute: anorm cmo/addatt/mo2/scalar/xnorm,ynorm,znorm/anorm ADDATT/scalar: creating 3 new attributes: xnorm ynorm znorm settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 47476 out of 47476 element colors changed. cmo printatt mo2 itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 2 2 0 47476 # FIX orientation upward if itetclr is 1 # This is not needed, as flip will flip only if needed # but will not flip upside down quads - bug # geniee/ mo2 /2dnormal/ -1 # REPORT surface stats cmo/printatt/mo2/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 24048 scalar 1 1 0 1 vector 3 3 0 1 nnodes 24048 24048 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 47476 47476 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 3 3 0 1 edges_per_element 3 3 0 1 faces_per_element 3 3 0 1 isetwd 0 0 0 24048 ialias 0 0 0 24048 imt1 1 1 0 24048 itp1 0 10 10 24048 icr1 0 0 0 24048 isn1 0 0 0 24048 xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 xtetwd 0 0 0 47476 itetclr 2 2 0 47476 itettyp 3 3 0 47476 itetoff 0 142425 142425 47476 jtetoff 0 142425 142425 47476 itet 1 24048 24047 47476x3 jtet 1 16000000 15999999 47476x3 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 4.820989305E-11 4.820989305E-11 0.000000000E+00 1 epsilona 1.046723828E-08 1.046723828E-08 0.000000000E+00 1 epsilonv 4.632292930E-08 4.632292930E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 24048 24048 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 2.757963683E+03 2.757963683E+03 0.000000000E+00 1 xmax 1.420000000E+02 1.420000000E+02 0.000000000E+00 1 ymax 1.640000000E+02 1.640000000E+02 0.000000000E+00 1 zmax 2.766921942E+03 2.766921942E+03 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 1 1 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 z_save 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 iign 0 0 0 24048 numbnd 0 2 2 24048 id_numb 0 1 1 24048 anorm -6.266290652E-01 9.999999985E-01 1.626629064E+00 47476 xnorm -5.021696121E-01 2.814852465E-01 7.836548585E-01 47476 ynorm -6.266290652E-01 2.903587180E-01 9.169877832E-01 47476 znorm 7.302449623E-01 9.999999985E-01 2.697550361E-01 47476 cmo printatt mo1 z_save minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH z_save 2.757962402E+03 2.766925537E+03 8.963134770E+00 24048 quality epsilonl, epsilonaspect: 4.8209893E-11 1.1204913E-31 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 47476 min aspect ratio = 0.6216E+00 max aspect ratio = 0.8698E+00 epsilonvol: 4.6322929E-08 --------------------------------------- element volumes b/w 0.4905E+00 and 0.5224E+00: 45803 element volumes b/w 0.5224E+00 and 0.5563E+00: 819 element volumes b/w 0.5563E+00 and 0.5923E+00: 392 element volumes b/w 0.5923E+00 and 0.6308E+00: 332 element volumes b/w 0.6308E+00 and 0.6717E+00: 130 min volume = 4.9052153E-01 max volume = 6.7172189E-01 ----------------------------------------------------------- 47476 total elements evaluated. dump gmv tri_brick_attributes.gmv mo2 cmo/modatt/-def-/-def-/ioflag/x finish # clean mo and remove extra attributes cmo/setatt/mo2/itetclr 1 47476 values reset for attribute itetclr cmo/DELATT/mo2/numbnd cmo/DELATT/mo2/id_numb resetpts itp geniee finish ##### DONE CREATE DEM and TOP SURFACE ####################### # CREATE LAYERS TRANSLATED DOWN cmo select mo2 dump/top.inp/mo2 dump/avs/top.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/1.0 dump/layer1.inp/mo2 dump/avs/layer1.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.756963683E+03 2.765921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/9.0 dump/layer2.inp/mo2 dump/avs/layer2.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.747963683E+03 2.756921942E+03 8.958258637E+00 24048 cmo setatt mo2 zic ZBOTTOM 24048 values reset for attribute zic dump/bot_flat.inp/mo2 dump/avs/bot_flat.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.745000000E+03 2.745000000E+03 0.000000000E+00 24048 # remove mo cmo delete mo2 Released Mesh Object: mo2 # STACK LAYERS cmo/create/mo3 cmo select mo3 # set debug define DEBUG 1 cmo/setatt/mo3/idebug/DEBUG npoints = 0 in subroutine cmo_setatt Warning: nelements = 0 1 values reset for attribute idebug stack/layers/avs/bot_flat.inp 3 layer2.inp 2,0 layer1.inp 1,0 top.inp 1,0/flip Running in DEBUG mode. 1 Layers to create: 4 Max material number: 1 Reading 4 surface files... cmo/addatt/mo3/layertyp/VINT/scalar/nnodes//permanent/agfx finish Read first surface: bot_flat.inp read/avs/bot_flat.inp/def1 cmo/addatt/def1/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def1 1 Mesh Object name: mo1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish --- surface cmo 2----------------------------- Read surface: layer2.inp read/avs/layer2.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: mo1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 5 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 1 type: 0 cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: bot_flat.inp and layer2.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/def1/cmonxt/ searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 finish --- surface cmo 3----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer1.inp read/avs/layer1.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: mo1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 48096 number of elements = 94952 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 5 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 1 type: 0 cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: layer2.inp and layer1.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 4----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: top.inp read/avs/top.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: mo1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo3 number of nodes = 72144 number of elements = 142428 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 5 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 1 type: 0 cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: layer1.inp and top.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish ................................................................ surface name layer color type llcorner zic bot_flat.inp 1 3 -1 1) 2.745000E+03 layer2.inp 2 2 0 24049) 2.750071E+03 layer1.inp 3 1 0 48097) 2.759071E+03 top.inp 4 1 -2 72145) 2.760071E+03 Elements per layer: 47476 stacked total: 189904 Nodes per layer: 24048 stacked total: 96192 No Truncating layer specified. files read: 4 from total: 4 ................................................................ cmo/addatt/mo3/nlayers/INT/scalar/scalar/constant// finish cmo/addatt/mo3/nnperlayer/INT/scalar/scalar/constant// finish cmo/addatt/mo3/neperlayer/INT/scalar/scalar/constant// finish cmo/setatt/mo3/nlayers 4 1 values reset for attribute nlayers finish cmo/setatt/mo3/nnperlayer 24048 1 values reset for attribute nnperlayer finish cmo/setatt/mo3/neperlayer 47476 1 values reset for attribute neperlayer finish Released Mesh Object: def1 Released Mesh Object: cmonxt Released Mesh Object: cmoprev stack done. dump gmv tmp_layers.gmv mo3 cmo/modatt/-def-/-def-/ioflag/x finish # fill volumes with hex or prism elements stack/fill/mo4/mo3 cmo/copy/mo4/mo3/ finish geniee finish cmo delete mo3 Released Mesh Object: mo3 cmo select mo4 resetpts/itp geniee finish # quality cmo/addatt/mo4/volume/cell_vol ADDATT/volume: creating new attribute: cell_vol epsilon area: 1.0556127E-08 epsilon vol: 1.1335781E-07 cmo/printatt/mo4/volume minmax cannot attribute volume in mo4 dump gmv tmp_stack_volume.gmv mo4 cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo4 cell_vol # FIX so MO has same numbering as exodus mesh # use sort to order element blocks as exodus will order # if this is not done, lagrit faceset numbers will not # correlate to exodus faceset numbers # itetclr must be ordered correctly # sort based on element itetclr number and median location # save median points to check they are inside mesh cmo status mo4 brief The current-mesh-object(CMO) is: mo4 2 Mesh Object name: mo4 number of nodes = 96192 number of elements = 142428 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active define NCELLS 142428 define NNODES 96192 cmo select mo4 createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo4/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo4/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo4/ikey geniee finish cmo/DELATT/mo4/ikey # CHECK that cell median points are inside the mesh cmo/create/mopts/NCELLS//pnt cmo/copyatt/mopts mo4/xic xmed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 142428 copied from mo4 xmed to -> mopts xic cmo/copyatt/mopts mo4/yic ymed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 142428 copied from mo4 ymed to -> mopts yic cmo/copyatt/mopts mo4/zic zmed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 142428 copied from mo4 zmed to -> mopts zic interpolate/map/mopts imt/1,0,0/mo4 itetclr nodes in indexed point set = 142428 INTRP METHOD: map FUNCTION: user TIEBREAKER: maxtie FLAG: plus1 0.400000000000E+01 cmo select mo4 finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 7122 7122 7122 5 % 14243 14243 14243 10 % 21364 21364 21364 15 % 28485 28485 28485 20 % 35606 35606 35606 25 % 42727 42727 42727 30 % 49848 49848 49848 35 % 56969 56969 56969 40 % 64090 64090 64090 45 % 71211 71211 71211 50 % 78332 78332 78332 55 % 85453 85453 85453 60 % 92574 92574 92574 65 % 99695 99695 99695 70 % 106816 106816 106816 75 % 113937 113937 113937 80 % 121058 121058 121058 85 % 128179 128179 128179 90 % 135300 135300 135300 95 % 142421 142421 142421 100 % 142428 142428 142428 Total cmo select mopts finish intrp/map done. cmo kdtree release cmo/DELATT/mo4/sbox finish cmo/DELATT/mo4/v12 finish cmo/DELATT/mo4/linkt finish cmo/DELATT/mo4/v2 finish finish dump/gmv/median_pts.gmv mopts cmo/modatt/-def-/-def-/ioflag/x finish cmo/addatt/mo4/med_mat/VINT/scalar/nelements cmo/copyatt/mo4 mopts/med_mat imt Warning: nelements = 0 in cmo mopts Error from: WARNING:copy node att into elem att cmo_copyatt sink elements and source nodes are equal length: ***** 142428 copied from mopts imt1 to -> mo4 med_mat cmo/printatt/mopts/imt minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH imt1 1 3 2 142428 cmo/delete/mopts Released Mesh Object: mopts cmo/select/mo4 # get outside surface mesh extract/surfmesh/1,0,0/mo5/mo4/external cmo/addatt/mo5/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo5/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo5/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo5/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo5/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo5/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo5/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo5/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo5/layertyp/VINT/scalar/nnodes/linear/permanent/agfx finish cmo/addatt/mo5/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo5/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo5/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo select mo5 cmo/addatt/mo5/id_side/vint/scalar/nelements/linear/permanent//0.0 cmo select mo5 settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 49330 out of 96806 element colors changed. cmo select mo5 cmo/copyatt/mo5/mo5/id_side/itetclr 96806 copied from mo5 itetclr to -> mo5 id_side dump gmv tmp_surf_normal.gmv mo5 cmo/modatt/-def-/-def-/ioflag/x finish cmo select mo5 cmo/DELATT/mo5/id_side cmo select mo5 pset/p1/attribute/layertyp/1,0,0/-1/eq THE PSET p1 HAS 24048 POINTS cmo select mo5 eltset/e1/exclusive/pset/get/p1 THE ELTSET e1 HAS 47476 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e1 THE ELTSET edel HAS 49330 ELEMENTS rmpoint/element/eltset get edel Dudded 25284 points plus parents, and 49330 elements removed. rmpoint/compress 25284 points removed and 0 elements removed. The new point count is 24048. The new element count is 47476. dump/avs2/faceset_bounds_bottom.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/copy/moall/mo_tmp1 finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 pset/p2/attribute/layertyp/1,0,0/-2/eq THE PSET p2 HAS 24048 POINTS cmo select mo5 eltset/e2/exclusive/pset/get/p2 THE ELTSET e2 HAS 47476 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e2 THE ELTSET edel HAS 49330 ELEMENTS rmpoint/element/eltset get edel Dudded 25284 points plus parents, and 49330 elements removed. rmpoint/compress 25284 points removed and 0 elements removed. The new point count is 24048. The new element count is 47476. dump/avs2/faceset_bounds_top.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump gmv tmp_top.gmv mo_tmp1 cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e3/itetclr/eq/3 THE ELTSET e3 HAS 498 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e3 THE ELTSET edel HAS 96308 ELEMENTS rmpoint/element/eltset get edel Dudded 48664 points plus parents, and 96308 elements removed. rmpoint/compress 48664 points removed and 0 elements removed. The new point count is 668. The new element count is 498. dump/avs2/faceset_bounds_right.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e4/itetclr/eq/4 THE ELTSET e4 HAS 429 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e4 THE ELTSET edel HAS 96377 ELEMENTS rmpoint/element/eltset get edel Dudded 48756 points plus parents, and 96377 elements removed. rmpoint/compress 48756 points removed and 0 elements removed. The new point count is 576. The new element count is 429. dump/avs2/faceset_bounds_back.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e5/itetclr/eq/5 THE ELTSET e5 HAS 498 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e5 THE ELTSET edel HAS 96308 ELEMENTS rmpoint/element/eltset get edel Dudded 48664 points plus parents, and 96308 elements removed. rmpoint/compress 48664 points removed and 0 elements removed. The new point count is 668. The new element count is 498. dump/avs2/faceset_bounds_left.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e6/itetclr/eq/6 THE ELTSET e6 HAS 429 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 96806 ELEMENTS eltset/edel/not eall e6 THE ELTSET edel HAS 96377 ELEMENTS rmpoint/element/eltset get edel Dudded 48756 points plus parents, and 96377 elements removed. rmpoint/compress 48756 points removed and 0 elements removed. The new point count is 576. The new element count is 429. dump/avs2/faceset_bounds_front.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/moall Released Mesh Object: moall cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo4 # write exodus with faceset files dump/exo/prism.exo/mo4///facesets faceset_bounds_bottom.avs faceset_bounds_top.a vs faceset_bounds_right.avs faceset_bounds_back.avs faceset_bounds_left.avs face set_bounds_front.avs ExodusII: Start writing to file: prism.exo using cmo: mo4 cmo/set_id/mo4/element/e_num_temp cmo/addatt/mo4 e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo4/index/ascending/ikey_utr/itetclr/e_num_temp cmo/addatt/mo4/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo4/e_num_temp finish cmo/modatt/mo4/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 96192 number of elements: 142428 number of edges: 0 number of edge blocks: 0 number of element blocks: 3 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 6 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo4/itetclr/ioflag/l finish ExodusII: Done writing to ExodusII file: prism.exo using cmo: mo4 # write sorted mesh with attributes in gmv and avs format # gmv will have facesets, AVS does not cmo setatt mo4 ipolydat no 1 values reset for attribute ipolydat cmo/DELATT/mo4 ikey_utr cmo/addatt/mo4/volume/cell_vol ADDATT/volume: creating new attribute: cell_vol epsilon area: 1.0556127E-08 epsilon vol: 1.1335781E-07 dump avs prism.inp mo4 cmo/modatt/-def-/-def-/ioflag/x finish dump gmv prism.gmv mo4 cmo/modatt/-def-/-def-/ioflag/x finish # report mesh stats cmo/status/mo4 The current-mesh-object(CMO) is: mo4 2 Mesh Object name: mo4 number of nodes = 96192 number of elements = 142428 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo x 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 9.619E+04 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 1.424E+05 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l no 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 4.841E-11 35 epsilona REAL scalar scalar const perma l 1.056E-08 36 epsilonv REAL scalar scalar const perma l 1.134E-07 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 9.619E+04 39 idebug INT scalar scalar const perma l 1.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 0.000E+00 52 ymin REAL scalar scalar const perma l 0.000E+00 53 zmin REAL scalar scalar const perma l 2.745E+03 54 xmax REAL scalar scalar const perma l 1.420E+02 55 ymax REAL scalar scalar const perma l 1.640E+02 56 zmax REAL scalar scalar const perma l 2.767E+03 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VINT scalar nnodes linea perma agf 0.000E+00 67 nlayers INT scalar scalar const tempo agl 4.000E+00 68 nnperlayer INT scalar scalar const tempo agl 2.405E+04 69 neperlayer INT scalar scalar const tempo agl 4.748E+04 70 xmed VDOU scalar nelements linea tempo gal 0.000E+00 71 ymed VDOU scalar nelements linea tempo gal 0.000E+00 72 zmed VDOU scalar nelements linea tempo gal 0.000E+00 73 med_mat VINT scalar nelements linea tempo agl 0.000E+00 74 cell_vol VDOU scalar nelements linea tempo agl 0.000E+00 cmo/printatt/mo4/-all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 96192 scalar 1 1 0 1 vector 3 3 0 1 nnodes 96192 96192 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 142428 142428 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 96192 ialias 0 72144 72144 96192 imt1 1 3 2 96192 itp1 2 12 10 96192 icr1 0 0 0 96192 isn1 0 0 0 96192 xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 96192 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 96192 zic 2.745000000E+03 2.766921942E+03 2.192194158E+01 96192 xtetwd 0 0 0 142428 itetclr 1 3 2 142428 itettyp 7 7 0 142428 itetoff 0 854562 854562 142428 jtetoff 0 712135 712135 142428 itet 1 96192 96191 142428x6 jtet 3 16712137 16712134 142428x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 4.841416263E-11 4.841416263E-11 0.000000000E+00 1 epsilona 1.055612742E-08 1.055612742E-08 0.000000000E+00 1 epsilonv 1.133578066E-07 1.133578066E-07 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 96192 96192 0 1 idebug 1 1 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 2.745000000E+03 2.745000000E+03 0.000000000E+00 1 xmax 1.420000000E+02 1.420000000E+02 0.000000000E+00 1 ymax 1.640000000E+02 1.640000000E+02 0.000000000E+00 1 zmax 2.766921942E+03 2.766921942E+03 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2 0 2 96192 nlayers 4 4 0 1 nnperlayer 24048 24048 0 1 neperlayer 47476 47476 0 1 xmed 3.310023248E-01 1.416689911E+02 1.413379888E+02 142428 ymed 3.293172717E-01 1.636706848E+02 1.633413675E+02 142428 zmed 2.746486084E+03 2.766418213E+03 1.993212891E+01 142428 med_mat 1 3 2 142428 cell_vol 4.905215266E-01 5.846110721E+00 5.355589194E+00 142428 cmo/printatt/mo4/-xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 96192 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 96192 zic 2.745000000E+03 2.766921942E+03 2.192194158E+01 96192 cmo/printatt/mo4/itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 3 2 142428 cmo/printatt/mo4/med_mat minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH med_mat 1 3 2 142428 cmo/printatt/mo4/cell_vol minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH cell_vol 4.905215266E-01 5.846110721E+00 5.355589194E+00 142428 finish LaGriT successfully completed