* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.200 Linux m64 * * * date_compile: 2016/10/25 Ubu gf * * * Run Time: 2017/Apr 10 12:56:56 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # modified to use top.inp already created # python generated script from Moulton mesh # 3 materials with 1m sublayers # modified to run outside of pylagrit # with checks and changes to workflow ##### STEP CREATE DEM and TOP SURFACE ####################### # this can be done once in DEM directory # SKIP THIS STEP and READ top.inp ############################################################ # define variables define DEBUG 0 define NX 144 define NY 167 define ZBOTTOM 2745. # trans 8m gives 2730 to 2737 define ZBOTTOM 2730. # these must be correct for median point check to work correctly # nnodes = 18-1 layers * top nodes, ncells = 18 layers * top cells define NLAYERS 28 define NNODES_TOP 21571 define NCELLS_TOP 10919 define NNODES 305732 define NCELLS 582417 define NNODES 673344 define NCELLS 1281852 read avs top.inp mo2 cmo/addatt/mo2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo2 1 Mesh Object name: mo2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish # FIX orientation upward if itetclr is 1 # This is not needed, as flip will flip only if needed # but will not flip upside down quads - bug # geniee/ mo2 /2dnormal/ -1 # REPORT surface stats boundary_components log/tty/off finish resetpts/itp geniee finish finish cmo/addatt/mo2/numbnd/vint/scalar/nnodes/linear/permanent/afgx/0/ finish cmo/addatt/mo2/id_numb/vint/scalar/nnodes/linear/permanent/afgx/0/ finish sort/-def-/index/-def-/ikey_tmp/numbnd cmo/addatt/mo2/ikey_tmp/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey_tmp finish CONNECTED COMPONENTS: 1 different exterior boundary components Set# Representitive Node # # Nodes in Set (numbnd_e(node#) attribute) 1 2 618 cmo/DELATT/mo2/ikey_tmp finish log/tty/on finish quality epsilonl, epsilonaspect: 4.8209893E-11 1.1204913E-31 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 47476 min aspect ratio = 0.6216E+00 max aspect ratio = 0.8698E+00 epsilonvol: 4.6322929E-08 --------------------------------------- element volumes b/w 0.4905E+00 and 0.5224E+00: 45803 element volumes b/w 0.5224E+00 and 0.5563E+00: 819 element volumes b/w 0.5563E+00 and 0.5923E+00: 392 element volumes b/w 0.5923E+00 and 0.6308E+00: 332 element volumes b/w 0.6308E+00 and 0.6717E+00: 130 min volume = 4.9052153E-01 max volume = 6.7172189E-01 ----------------------------------------------------------- 47476 total elements evaluated. cmo/printatt/mo2/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 24048 scalar 1 1 0 1 vector 3 3 0 1 nnodes 24048 24048 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 47476 47476 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 3 3 0 1 edges_per_element 3 3 0 1 faces_per_element 3 3 0 1 isetwd 0 0 0 24048 ialias 0 0 0 24048 imt1 1 1 0 24048 itp1 0 10 10 24048 icr1 0 0 0 24048 isn1 0 0 0 24048 xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 xtetwd 0 0 0 47476 itetclr 1 1 0 47476 itettyp 3 3 0 47476 itetoff 0 142425 142425 47476 jtetoff 0 142425 142425 47476 itet 1 24048 24047 47476x3 jtet 1 16000000 15999999 47476x3 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 4.820989305E-11 4.820989305E-11 0.000000000E+00 1 epsilona 1.046723828E-08 1.046723828E-08 0.000000000E+00 1 epsilonv 4.632292930E-08 4.632292930E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 24048 24048 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 2.757963683E+03 2.757963683E+03 0.000000000E+00 1 xmax 1.420000000E+02 1.420000000E+02 0.000000000E+00 1 ymax 1.640000000E+02 1.640000000E+02 0.000000000E+00 1 zmax 2.766921942E+03 2.766921942E+03 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 z_save 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 anorm -2.836525848E-01 9.999999985E-01 1.283652583E+00 47476 xnorm -2.840325658E-01 9.999999154E-01 1.284032481E+00 47476 ynorm -2.840325658E-01 9.999999154E-01 1.284032481E+00 47476 znorm -2.836525848E-01 9.999999985E-01 1.283652583E+00 47476 numbnd 0 2 2 24048 id_numb 0 1 1 24048 quality epsilonl, epsilonaspect: 4.8209893E-11 1.1204913E-31 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 47476 min aspect ratio = 0.6216E+00 max aspect ratio = 0.8698E+00 epsilonvol: 4.6322929E-08 --------------------------------------- element volumes b/w 0.4905E+00 and 0.5224E+00: 45803 element volumes b/w 0.5224E+00 and 0.5563E+00: 819 element volumes b/w 0.5563E+00 and 0.5923E+00: 392 element volumes b/w 0.5923E+00 and 0.6308E+00: 332 element volumes b/w 0.6308E+00 and 0.6717E+00: 130 min volume = 4.9052153E-01 max volume = 6.7172189E-01 ----------------------------------------------------------- 47476 total elements evaluated. dump gmv tri_attributes.gmv mo2 cmo/modatt/-def-/-def-/ioflag/x finish # clean mo and remove extra attributes cmo/setatt/mo2/itetclr 1 47476 values reset for attribute itetclr cmo/DELATT/mo2/numbnd cmo/DELATT/mo2/id_numb resetpts itp geniee finish ##### DONE CREATE DEM and TOP SURFACE ####################### # CREATE LAYERS TRANSLATED DOWN cmo select mo2 dump/top.inp/mo2 dump/avs/top.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 24048 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 24048 zic 2.757963683E+03 2.766921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/.1 dump/layer1.inp/mo2 dump/avs/layer1.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.757863683E+03 2.766821942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/.3 dump/layer2.inp/mo2 dump/avs/layer2.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.757563683E+03 2.766521942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/.6 dump/layer3.inp/mo2 dump/avs/layer3.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.756963683E+03 2.765921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/1.0 dump/layer4.inp/mo2 dump/avs/layer4.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.755963683E+03 2.764921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/2.0 dump/layer5.inp/mo2 dump/avs/layer5.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.753963683E+03 2.762921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/2.0 dump/layer6.inp/mo2 dump/avs/layer6.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.751963683E+03 2.760921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/4.0 dump/layer7.inp/mo2 dump/avs/layer7.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.747963683E+03 2.756921942E+03 8.958258637E+00 24048 cmo select mo2 math/sub/mo2/zic/1,0,0/mo2/zic/4.0 dump/layer8.inp/mo2 dump/avs/layer8.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.743963683E+03 2.752921942E+03 8.958258637E+00 24048 math/sub/mo2/zic/1,0,0/mo2/zic/8.0 dump/layer9.inp/mo2 dump/avs/layer9.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.735963683E+03 2.744921942E+03 8.958258637E+00 24048 # bottom trans and bottom flat math/sub/mo2/zic/1,0,0/mo2/zic/8.0 dump/layer10.inp/mo2 dump/avs/layer10.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.727963683E+03 2.736921942E+03 8.958258637E+00 24048 cmo setatt mo2 zic ZBOTTOM 24048 values reset for attribute zic dump/bot_flat.inp/mo2 dump/avs/bot_flat.inp/mo2 cmo/modatt/-def-/-def-/ioflag/x finish finish cmo printatt mo2 zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 2.730000000E+03 2.730000000E+03 0.000000000E+00 24048 # remove mo cmo delete mo2 Released Mesh Object: mo2 # STACK LAYERS cmo/create/mo3 cmo select mo3 # set debug define DEBUG 1 cmo/setatt/mo3/idebug/DEBUG npoints = 0 in subroutine cmo_setatt Warning: nelements = 0 1 values reset for attribute idebug stack/layers/avs/bot_flat.inp 10 layer9.inp 9,3 layer8.inp 8,3 layer7.inp 7,1 la yer6.inp 6,1 layer5.inp 5,1 layer4.inp 4,3 layer3.inp 3,1 layer2.inp 2,2 layer1. inp 1,2 top.inp 1,0/flip Running in DEBUG mode. 1 Layers to create: 28 Max material number: 1 Reading 11 surface files... cmo/addatt/mo3/layertyp/VINT/scalar/nnodes//permanent/agfx finish Read first surface: bot_flat.inp read/avs/bot_flat.inp/def1 cmo/addatt/def1/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def1 1 Mesh Object name: mo3 number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish --- surface cmo 2----------------------------- Read surface: layer9.inp read/avs/layer9.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: mo3 number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/2.500000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 1.9165281E+00 New height: min/max 1.4909207E+00 3.7304854E+00 Old height: min/max 5.9636829E+00 1.4921942E+01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: bot_flat.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/def1/cmonxt/ searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 finish Unit cmo 2 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 3.8330563E+00 New height: min/max 2.9818415E+00 7.4609708E+00 Old height: min/max 5.9636829E+00 1.4921942E+01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 3 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/7.500000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 5.7495844E+00 New height: min/max 4.4727622E+00 1.1191456E+01 Old height: min/max 5.9636829E+00 1.4921942E+01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 4 of 4 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer9.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 3----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer8.inp read/avs/layer8.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 120240 number of elements = 237380 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/2.500000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 2.0000000E+00 New height: min/max 2.0000000E+00 2.0000000E+00 Old height: min/max 8.0000000E+00 8.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer9.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 4.0000000E+00 New height: min/max 4.0000000E+00 4.0000000E+00 Old height: min/max 8.0000000E+00 8.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 3 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/7.500000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 6.0000000E+00 New height: min/max 6.0000000E+00 6.0000000E+00 Old height: min/max 8.0000000E+00 8.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 4 of 4 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer8.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 4----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer7.inp read/avs/layer7.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 216432 number of elements = 427284 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 2 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 2.0000000E+00 New height: min/max 2.0000000E+00 2.0000000E+00 Old height: min/max 4.0000000E+00 4.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer8.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 2 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer7.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 5----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer6.inp read/avs/layer6.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 264528 number of elements = 522236 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 2 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 2.0000000E+00 New height: min/max 2.0000000E+00 2.0000000E+00 Old height: min/max 4.0000000E+00 4.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer7.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 2 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer6.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 6----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer5.inp read/avs/layer5.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 312624 number of elements = 617188 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 2 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 1.0000000E+00 New height: min/max 1.0000000E+00 1.0000000E+00 Old height: min/max 2.0000000E+00 2.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer6.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 2 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer5.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 7----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer4.inp read/avs/layer4.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 360720 number of elements = 712140 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/2.500000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 5.0000000E-01 New height: min/max 5.0000000E-01 5.0000000E-01 Old height: min/max 2.0000000E+00 2.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer5.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 1.0000000E+00 New height: min/max 1.0000000E+00 1.0000000E+00 Old height: min/max 2.0000000E+00 2.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 3 of 4 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/7.500000E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 1.5000000E+00 New height: min/max 1.5000000E+00 1.5000000E+00 Old height: min/max 2.0000000E+00 2.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 4 of 4 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer4.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 8----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer3.inp read/avs/layer3.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 456912 number of elements = 902044 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 2 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/5.000000E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 5.0000000E-01 New height: min/max 5.0000000E-01 5.0000000E-01 Old height: min/max 1.0000000E+00 1.0000000E+00 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer4.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 2 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer3.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 9----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer2.inp read/avs/layer2.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 505008 number of elements = 996996 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 3 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/3.333333E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 1.9999998E-01 New height: min/max 1.9999998E-01 1.9999998E-01 Old height: min/max 6.0000000E-01 6.0000000E-01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer3.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 3 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/6.666667E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 4.0000002E-01 New height: min/max 4.0000002E-01 4.0000002E-01 Old height: min/max 6.0000000E-01 6.0000000E-01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 3 of 3 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer2.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 10----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: layer1.inp read/avs/layer1.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 577152 number of elements = 1139424 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 3 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/3.333333E-01/ cmo/copy/cmonxt/def2/ finish Created new trilayer with average distance of 9.9999990E-02 New height: min/max 9.9999990E-02 9.9999990E-02 Old height: min/max 3.0000000E-01 3.0000000E-01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: layer2.inp and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 2 of 3 type: 2 trilayer/derive/proportional/cmonxt/def1/def2/6.666667E-01/ cmo/copy/cmonxt/def2/ Released Mesh Object: cmonxt finish Created new trilayer with average distance of 2.0000001E-01 New height: min/max 2.0000001E-01 2.0000001E-01 Old height: min/max 3.0000000E-01 3.0000000E-01 finish cmo/copyatt/cmonxt/def1/itetclr/itetclr/ 47476 copied from def1 itetclr to -> cmonxt itetclr finish Layers compared: refine and refine cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish Unit cmo 3 of 3 type: 0 Released Mesh Object: cmonxt cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: refine and layer1.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish --- surface cmo 11----------------------------- Released Mesh Object: def1 cmo/delete/cmonxt/ Released Mesh Object: cmonxt finish Read surface: top.inp read/avs/top.inp/def2 cmo/addatt/def2/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/anorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/xnorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/ynorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/znorm/VDOUBLE/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: cmoprev number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo3 number of nodes = 649296 number of elements = 1281852 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: def1 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: def2 number of nodes = 24048 number of elements = 47476 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish Unit cmo 1 of 1 type: 0 cmo/delete/def2/ Released Mesh Object: def2 finish Layers compared: layer1.inp and top.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo3/mo3/cmonxt/ cmo/move/-tmp_source_internal-/mo3 finish searching for mo3 attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo3 cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish finish ................................................................ surface name layer color type llcorner zic bot_flat.inp 1 10 -1 1) 2.730000E+03 refine 2 10 2 24049) 2.732018E+03 refine 3 10 2 48097) 2.734036E+03 refine 4 10 2 72145) 2.736053E+03 layer9.inp 5 9 0 96193) 2.738071E+03 refine 6 9 2 120241) 2.740071E+03 refine 7 9 2 144289) 2.742071E+03 refine 8 9 2 168337) 2.744071E+03 layer8.inp 9 8 0 192385) 2.746071E+03 refine 10 8 2 216433) 2.748071E+03 layer7.inp 11 7 0 240481) 2.750071E+03 refine 12 7 2 264529) 2.752071E+03 layer6.inp 13 6 0 288577) 2.754071E+03 refine 14 6 2 312625) 2.755071E+03 layer5.inp 15 5 0 336673) 2.756071E+03 refine 16 5 2 360721) 2.756571E+03 refine 17 5 2 384769) 2.757071E+03 refine 18 5 2 408817) 2.757571E+03 layer4.inp 19 4 0 432865) 2.758071E+03 refine 20 4 2 456913) 2.758571E+03 layer3.inp 21 3 0 480961) 2.759071E+03 refine 22 3 2 505009) 2.759271E+03 refine 23 3 2 529057) 2.759471E+03 layer2.inp 24 2 0 553105) 2.759671E+03 refine 25 2 2 577153) 2.759771E+03 refine 26 2 2 601201) 2.759871E+03 layer1.inp 27 1 0 625249) 2.759971E+03 top.inp 28 1 -2 649297) 2.760071E+03 Elements per layer: 47476 stacked total: 1329328 Nodes per layer: 24048 stacked total: 673344 No Truncating layer specified. files read: 11 from total: 11 ................................................................ cmo/addatt/mo3/nlayers/INT/scalar/scalar/constant// finish cmo/addatt/mo3/nnperlayer/INT/scalar/scalar/constant// finish cmo/addatt/mo3/neperlayer/INT/scalar/scalar/constant// finish cmo/setatt/mo3/nlayers 28 1 values reset for attribute nlayers finish cmo/setatt/mo3/nnperlayer 24048 1 values reset for attribute nnperlayer finish cmo/setatt/mo3/neperlayer 47476 1 values reset for attribute neperlayer finish Released Mesh Object: def1 Released Mesh Object: cmonxt Released Mesh Object: cmoprev stack done. dump gmv tmp_layers.gmv mo3 cmo/modatt/-def-/-def-/ioflag/x finish # fill volumes with hex or prism elements stack/fill/mo4/mo3 cmo/copy/mo4/mo3/ finish geniee finish cmo delete mo3 Released Mesh Object: mo3 cmo select mo4 resetpts/itp geniee finish # quality cmo/addatt/mo4/volume/cell_vol ADDATT/volume: creating new attribute: cell_vol epsilon area: 1.0752117E-08 epsilon vol: 1.9092243E-07 cmo/printatt/mo4/volume minmax cannot attribute volume in mo4 dump gmv tmp_stack_volume.gmv mo4 cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo4 cell_vol # FIX so MO has same numbering as exodus mesh # use sort to order element blocks as exodus will order # if this is not done, lagrit faceset numbers will not # correlate to exodus faceset numbers # itetclr must be ordered correctly # sort based on element itetclr number and median location # save median points to check they are inside mesh cmo status mo4 brief The current-mesh-object(CMO) is: mo4 1 Mesh Object name: mo4 number of nodes = 673344 number of elements = 1281852 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active cmo select mo4 createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo4/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo4/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo4/ikey geniee finish cmo/DELATT/mo4/ikey # CHECK that cell median points are inside the mesh cmo/create/mopts/NCELLS//pnt cmo/copyatt/mopts mo4/xic xmed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 1281852 copied from mo4 xmed to -> mopts xic cmo/copyatt/mopts mo4/yic ymed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 1281852 copied from mo4 ymed to -> mopts yic cmo/copyatt/mopts mo4/zic zmed Warning: nelements = 0 in cmo mopts Error from: WARNING:copy element att into node att cmo_copyatt sink elements and source nodes are equal length: ***** 1281852 copied from mo4 zmed to -> mopts zic interpolate/map/mopts imt/1,0,0/mo4 itetclr nodes in indexed point set = 1281852 INTRP METHOD: map FUNCTION: user TIEBREAKER: maxtie FLAG: plus1 0.110000000000E+02 cmo select mo4 finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 25638 25638 25638 2 % 51275 51275 51275 4 % 76912 76912 76912 6 % 102549 102549 102549 8 % 128186 128186 128186 10 % 153823 153823 153823 12 % 179460 179460 179460 14 % 205097 205097 205097 16 % 230734 230734 230734 18 % 256371 256371 256371 20 % 282008 282008 282008 22 % 307645 307645 307645 24 % 333282 333282 333282 26 % 358919 358919 358919 28 % 384556 384556 384556 30 % 410193 410193 410193 32 % 435830 435830 435830 34 % 461467 461467 461467 36 % 487104 487104 487104 38 % 512741 512741 512741 40 % 538378 538378 538378 42 % 564015 564015 564015 44 % 589652 589652 589652 46 % 615289 615289 615289 48 % 640926 640926 640926 50 % 666563 666563 666563 52 % 692200 692200 692200 54 % 717837 717837 717837 56 % 743474 743474 743474 58 % 769111 769111 769111 60 % 794748 794748 794748 62 % 820385 820385 820385 64 % 846022 846022 846022 66 % 871659 871659 871659 68 % 897296 897296 897296 70 % 922933 922933 922933 72 % 948570 948570 948570 74 % 974207 974207 974207 76 % 999844 999844 999844 78 % 1025481 1025481 1025481 80 % 1051118 1051118 1051118 82 % 1076755 1076755 1076755 84 % 1102392 1102392 1102392 86 % 1128029 1128029 1128029 88 % 1153666 1153666 1153666 90 % 1179303 1179303 1179303 92 % 1204940 1204940 1204940 94 % 1230577 1230577 1230577 96 % 1256214 1256214 1256214 98 % 1281851 1281851 1281851 100 % 1281852 1281852 1281852 Total cmo select mopts finish intrp/map done. cmo kdtree release cmo/DELATT/mo4/sbox finish cmo/DELATT/mo4/v12 finish cmo/DELATT/mo4/linkt finish cmo/DELATT/mo4/v2 finish finish dump/gmv/median_pts.gmv mopts cmo/modatt/-def-/-def-/ioflag/x finish cmo/addatt/mo4/med_mat/VINT/scalar/nelements cmo/copyatt/mo4 mopts/med_mat imt Warning: nelements = 0 in cmo mopts Error from: WARNING:copy node att into elem att cmo_copyatt sink elements and source nodes are equal length: ***** 1281852 copied from mopts imt1 to -> mo4 med_mat cmo/printatt/mopts/imt minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH imt1 1 10 9 1281852 cmo/delete/mopts Released Mesh Object: mopts cmo/select/mo4 # get outside surface mesh extract/surfmesh/1,0,0/mo5/mo4/external cmo/addatt/mo5/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo5/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo5/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo5/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo5/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo5/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo5/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo5/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo5/layertyp/VINT/scalar/nnodes/linear/permanent/agfx finish cmo/addatt/mo5/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo5/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo5/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo select mo5 cmo/addatt/mo5/id_side/vint/scalar/nelements/linear/permanent//0.0 cmo select mo5 settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 64162 out of 111638 element colors changed. cmo select mo5 cmo/copyatt/mo5/mo5/id_side/itetclr 111638 copied from mo5 itetclr to -> mo5 id_side dump gmv tmp_surf_normal.gmv mo5 cmo/modatt/-def-/-def-/ioflag/x finish # set facesets cmo select mo5 cmo/DELATT/mo5/id_side cmo select mo5 pset/p1/attribute/layertyp/1,0,0/-1/eq THE PSET p1 HAS 24048 POINTS cmo select mo5 eltset/e1/exclusive/pset/get/p1 THE ELTSET e1 HAS 47476 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e1 THE ELTSET edel HAS 64162 ELEMENTS rmpoint/element/eltset get edel Dudded 40116 points plus parents, and 64162 elements removed. rmpoint/compress 40116 points removed and 0 elements removed. The new point count is 24048. The new element count is 47476. dump/avs2/faceset_bounds_bottom.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/copy/moall/mo_tmp1 finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 pset/p2/attribute/layertyp/1,0,0/-2/eq THE PSET p2 HAS 24048 POINTS cmo select mo5 eltset/e2/exclusive/pset/get/p2 THE ELTSET e2 HAS 47476 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e2 THE ELTSET edel HAS 64162 ELEMENTS rmpoint/element/eltset get edel Dudded 40116 points plus parents, and 64162 elements removed. rmpoint/compress 40116 points removed and 0 elements removed. The new point count is 24048. The new element count is 47476. dump/avs2/faceset_bounds_top.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump gmv tmp_top.gmv mo_tmp1 cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e3/itetclr/eq/3 THE ELTSET e3 HAS 4482 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e3 THE ELTSET edel HAS 107156 ELEMENTS rmpoint/element/eltset get edel Dudded 59488 points plus parents, and 107156 elements removed. rmpoint/compress 59488 points removed and 0 elements removed. The new point count is 4676. The new element count is 4482. dump/avs2/faceset_bounds_right.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e4/itetclr/eq/4 THE ELTSET e4 HAS 3861 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e4 THE ELTSET edel HAS 107777 ELEMENTS rmpoint/element/eltset get edel Dudded 60132 points plus parents, and 107777 elements removed. rmpoint/compress 60132 points removed and 0 elements removed. The new point count is 4032. The new element count is 3861. dump/avs2/faceset_bounds_back.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e5/itetclr/eq/5 THE ELTSET e5 HAS 4482 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e5 THE ELTSET edel HAS 107156 ELEMENTS rmpoint/element/eltset get edel Dudded 59488 points plus parents, and 107156 elements removed. rmpoint/compress 59488 points removed and 0 elements removed. The new point count is 4676. The new element count is 4482. dump/avs2/faceset_bounds_left.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo5 eltset/e6/itetclr/eq/6 THE ELTSET e6 HAS 3861 ELEMENTS cmo/copy/mo_tmp1/mo5 cmo/DELATT/mo_tmp1/itetclr0 cmo/DELATT/mo_tmp1/itetclr1 cmo/DELATT/mo_tmp1/facecol cmo/DELATT/mo_tmp1/idface0 cmo/DELATT/mo_tmp1/idelem0 eltset/eall/itetclr/ge/0 THE ELTSET eall HAS 111638 ELEMENTS eltset/edel/not eall e6 THE ELTSET edel HAS 107777 ELEMENTS rmpoint/element/eltset get edel Dudded 60132 points plus parents, and 107777 elements removed. rmpoint/compress 60132 points removed and 0 elements removed. The new point count is 4032. The new element count is 3861. dump/avs2/faceset_bounds_front.avs/mo_tmp1/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish addmesh/merge/moall moall mo_tmp1 cmo/move/-tmp_source_internal-/moall finish cmo/delete/-tmp_source_internal-/ Released Mesh Object: -tmp_source_internal- finish dump gmv merge_facesets.gmv moall cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/moall Released Mesh Object: moall cmo/delete/mo_tmp1 Released Mesh Object: mo_tmp1 cmo select mo4 # write exodus with faceset files dump/exo/prism.exo/mo4///facesets faceset_bounds_bottom.avs faceset_bounds_top.a vs faceset_bounds_right.avs faceset_bounds_back.avs faceset_bounds_left.avs face set_bounds_front.avs ExodusII: Start writing to file: prism.exo using cmo: mo4 cmo/set_id/mo4/element/e_num_temp cmo/addatt/mo4 e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo4/index/ascending/ikey_utr/itetclr/e_num_temp cmo/addatt/mo4/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo4/e_num_temp finish cmo/modatt/mo4/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 673344 number of elements: 1281852 number of edges: 0 number of edge blocks: 0 number of element blocks: 10 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 6 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo4/itetclr/ioflag/l finish ExodusII: Done writing to ExodusII file: prism.exo using cmo: mo4 # write sorted mesh with attributes in gmv and avs format # gmv will have facesets, AVS does not cmo setatt mo4 ipolydat no 1 values reset for attribute ipolydat cmo/DELATT/mo4 ikey_utr cmo/addatt/mo4/volume/cell_vol ADDATT/volume: creating new attribute: cell_vol epsilon area: 1.0752117E-08 epsilon vol: 1.9092243E-07 dump avs prism.inp mo4 cmo/modatt/-def-/-def-/ioflag/x finish dump gmv prism.gmv mo4 cmo/modatt/-def-/-def-/ioflag/x finish # report mesh stats cmo/status/mo4 The current-mesh-object(CMO) is: mo4 1 Mesh Object name: mo4 number of nodes = 673344 number of elements = 1281852 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo x 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 6.733E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 1.282E+06 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l no 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 4.886E-11 35 epsilona REAL scalar scalar const perma l 1.075E-08 36 epsilonv REAL scalar scalar const perma l 1.909E-07 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 6.733E+05 39 idebug INT scalar scalar const perma l 1.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 0.000E+00 52 ymin REAL scalar scalar const perma l 0.000E+00 53 zmin REAL scalar scalar const perma l 2.730E+03 54 xmax REAL scalar scalar const perma l 1.420E+02 55 ymax REAL scalar scalar const perma l 1.640E+02 56 zmax REAL scalar scalar const perma l 2.767E+03 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VINT scalar nnodes linea perma agf 3.000E+00 67 nlayers INT scalar scalar const tempo agl 2.800E+01 68 nnperlayer INT scalar scalar const tempo agl 2.405E+04 69 neperlayer INT scalar scalar const tempo agl 4.748E+04 70 xmed VDOU scalar nelements linea tempo gal 0.000E+00 71 ymed VDOU scalar nelements linea tempo gal 0.000E+00 72 zmed VDOU scalar nelements linea tempo gal 0.000E+00 73 med_mat VINT scalar nelements linea tempo agl 0.000E+00 74 cell_vol VDOU scalar nelements linea tempo agl 0.000E+00 cmo/printatt/mo4/-all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 673344 scalar 1 1 0 1 vector 3 3 0 1 nnodes 673344 673344 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1281852 1281852 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 673344 ialias 0 649296 649296 673344 imt1 1 10 9 673344 itp1 0 12 12 673344 icr1 0 0 0 673344 isn1 0 0 0 673344 xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 673344 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 673344 zic 2.730000000E+03 2.766921942E+03 3.692194158E+01 673344 xtetwd 0 0 0 1281852 itetclr 1 10 9 1281852 itettyp 7 7 0 1281852 itetoff 0 7691106 7691106 1281852 jtetoff 0 6409255 6409255 1281852 itet 1 673344 673343 1281852x6 jtet 3 22409257 22409254 1281852x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 4.886153451E-11 4.886153451E-11 0.000000000E+00 1 epsilona 1.075211692E-08 1.075211692E-08 0.000000000E+00 1 epsilonv 1.909224280E-07 1.909224280E-07 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 673344 673344 0 1 idebug 1 1 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 ymin 0.000000000E+00 0.000000000E+00 0.000000000E+00 1 zmin 2.730000000E+03 2.730000000E+03 0.000000000E+00 1 xmax 1.420000000E+02 1.420000000E+02 0.000000000E+00 1 ymax 1.640000000E+02 1.640000000E+02 0.000000000E+00 1 zmax 2.766921942E+03 2.766921942E+03 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2 2 4 673344 nlayers 28 28 0 1 nnperlayer 24048 24048 0 1 neperlayer 47476 47476 0 1 xmed 3.310023248E-01 1.416689911E+02 1.413379888E+02 1281852 ymed 3.293172717E-01 1.636706848E+02 1.633413675E+02 1281852 zmed 2.730746582E+03 2.766868164E+03 3.612158203E+01 1281852 med_mat 1 10 9 1281852 cell_vol 4.905214776E-02 1.829418825E+00 1.780366678E+00 1281852 cmo/printatt/mo4/-xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 0.000000000E+00 1.420000000E+02 1.420000000E+02 673344 yic 0.000000000E+00 1.640000000E+02 1.640000000E+02 673344 zic 2.730000000E+03 2.766921942E+03 3.692194158E+01 673344 cmo/printatt/mo4/itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 10 9 1281852 cmo/printatt/mo4/med_mat minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH med_mat 1 10 9 1281852 cmo/printatt/mo4/cell_vol minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH cell_vol 4.905214776E-02 1.829418825E+00 1.780366678E+00 1281852 finish LaGriT successfully completed