SALT CAN 3D FULL V2 
February 9 2017

Jan 11 2018
Modified node materials to expand salt pile and add can rim id.

Source: Canister and Instrumentation Locations 11092016.pdf
Source data in inches, FEHM Mesh in meters
Mesh:  /scratch/sft/tam/SALT/canister_peter/3D_stack_v2

  Zone CAN   1  
  Zone SALT  2  
  Zone AIR   3      
  Zone EDZ   4      
  Zone ROCK  5 

  Zone RIM   6

  Can center at 0,0 coordinate
  Can radius = .3048 meters (12 inches)
  Can length = 1.5 meters (60 inches)
  Salt Pile Bottom length = 3 meters
  Salt Pile Top length to incline = 2 meters
  distance from can to salt top = .6096 (24 inches)
  distance from wall to can = .6096 (24 inches)
  distance from can center to salt edge = 1.534 meters (60 inches)
  distance from wall to salt edge = 2.4384 meters (96 inches)
  distance from floor to ceiling = 2.4384 meters (96 inches)

  Linear Spacing .05m near can increasing to .5m away from room 
  Layer Spacing along Y axis is .1 meters

  Extents:
   X   -6.6040  to 12.0904 meters  (-260 to 476 inches)  
   Z   -18.1864 to 18.3896 meters  (-716 to 724 inches)
   Y   0        to 4.1     meters  (0    to 161.417 inches) 

-------------------------------------------------------------
3D Tet Mesh 

nodes 529368 
tet elements 3063684
Volume min =   5.1773935E-05                                    
Volume max =   1.1688361E-02                                    
Total Volume:  2.8034421E+03         

Material Zones:
Material   1 has      2496 nodes. #nodes/nnodes is   0.471505662426E-02 
Material   2 has     17622 nodes. #nodes/nnodes is   0.332887507975E-01 
Material   3 has     89046 nodes. #nodes/nnodes is   0.168211907148     
Material   4 has     35526 nodes. #nodes/nnodes is   0.671102181077E-01 
Material   5 has    384678 nodes. #nodes/nnodes is   0.726674079895    

Boundary Nodes:
Face top           1 has       2058 nodes.                                       
Face bottom        2 has       1974 nodes.                                       
Face left_w        3 has       4536 nodes.                                       
Face right_e       5 has       4116 nodes.                                       
Face back_n        6 has      12604 nodes.                                       
Face front_s       4 has      12604 nodes.            

Files:

-rw-r--r-- 1 tamiller sft 156M Feb 10 11:38 tet_full.fehmn
-rw-r--r-- 1 tamiller sft 120M Feb 10 11:39 tet_full.stor
-rw-r--r-- 1 tamiller sft 408K Feb 10 11:38 tet_full_outside.zone
-rw-r--r-- 1 tamiller sft 5.6M Feb 10 11:38 tet_full_material.zone
-rw-r--r-- 1 tamiller sft 2.5M Feb 10 11:38 tet_full_multi_mat.zone
-rw-r--r-- 1 tamiller sft 2.3M Feb 10 11:38 tet_full_outside_vor.area
-rw-r--r-- 1 tamiller sft  65M Feb 10 11:40 tet_full_nodes.dat
-------------------------------------------------------------

Jan 11 2018

Adjust salt pile to continue to wall.
Assign material 6 to nodes on rim of can.

Total possible materials  =      6                                              
Material   1 has      1984 nodes. #nodes/nnodes is   0.374786532484E-02 
Material   2 has     18520 nodes. #nodes/nnodes is   0.349851138890E-01 
Material   3 has     88148 nodes. #nodes/nnodes is   0.166515544057     
Material   4 has     35526 nodes. #nodes/nnodes is   0.671102181077E-01 
Material   5 has    384678 nodes. #nodes/nnodes is   0.726674079895     
Material   6 has       512 nodes. #nodes/nnodes is   0.967191066593E-03