SALT CAN 2D and 3D SLICES V1 
February 7 2017

Source: Canister and Instrumentation Locations 11092016.pdf
Source data in inches, FEHM Mesh in meters
Mesh:  /scratch/sft/tam/SALT/canister_peter/slice_v1

CAN center at 0,0
Radius 12 inches, .3048 meters
Spacing 2 inches, .0508 meters
Spacing Y direction 3.937 inches, .1 meters
Max outside spacing 16 inches, .4064 meters

Material 1 CAN
Material 2 SALT
Material 3 AIR
Material 4 ROOM EDGES
Material 5 ROCK

-------------------------------------------------------------
2D Triangle Mesh

nodes 9315
tri elements 18353
Minimum Voronoi area  =  1.0354787E-03
Maximum Voronoi area  =  1.6516096E-01
Total   Voronoi area:    6.8376637E+02

Extents (meters):
         MIN               MAX               DIFFERENCE
 xic    -6.604000000E+00  1.209040000E+01   1.869440000E+01  
 zic    -1.818640000E+01  1.838960000E+01   3.657600000E+01 

Material Zones:
Material           1 has       156 nodes. #nodes/nnodes is   0.167471822351E-01 
Material           2 has       668 nodes. #nodes/nnodes is   0.717122927308E-01 
Material           3 has      1816 nodes. #nodes/nnodes is   0.194954380393     
Material           4 has      1876 nodes. #nodes/nnodes is   0.201395601034     
Material           5 has      4799 nodes. #nodes/nnodes is   0.515190541744     

Boundary Nodes:
Face top           1 has        47 nodes.                                       
Face bottom        2 has        47 nodes.                                       
Face left_w        3 has        91 nodes.                                       
Face right_e       5 has        94 nodes.                                       

Files:
-rw-r--r-- 1 tamiller sft 1.3M Feb  7 11:05 tri_slice.fehmn
-rw-r--r-- 1 tamiller sft 3.0M Feb  7 11:05 tri_slice.stor

-rw-r--r-- 1 tamiller sft 101K Feb  7 11:05 tri_slice_material.zone
-rw-r--r-- 1 tamiller sft  33K Feb  7 11:05 tri_slice_multi_mat.zone
-rw-r--r-- 1 tamiller sft  18K Feb  7 11:05 tri_slice_outside_vor.area
-rw-r--r-- 1 tamiller sft 3.2K Feb  7 11:05 tri_slice_outside.zone

-rw-r--r-- 1 tamiller sft 920K Feb  7 11:05 tri_slice_nodes.dat


-------------------------------------------------------------
3D Tet Mesh 3 nodes thick in Y direction

nodes 27945 
tet elements 106136
Voronoi Volume min =   5.1773935E-05                                    
Voronoi Volume max =   1.6516096E-02                                    
Total Voronoi Volume:  1.3675327E+02                                   

Extents (meters):
         MIN               MAX               DIFFERENCE
 xic    -6.604000000E+00  1.209040000E+01   1.869440000E+01      
 yic     0.000000000E+00  2.000000000E-01   2.000000000E-01
 zic    -1.818640000E+01  1.838960000E+01   3.657600000E+01    

Material Zones:
Material           1 has       468 nodes. #nodes/nnodes is   0.167471822351E-01 
Material           2 has      2004 nodes. #nodes/nnodes is   0.717122927308E-01 
Material           3 has      5448 nodes. #nodes/nnodes is   0.194954380393     
Material           4 has      5628 nodes. #nodes/nnodes is   0.201395601034     
Material           5 has     14397 nodes. #nodes/nnodes is   0.515190541744     

Boundary Nodes:
Face top           1 has       141 nodes.                                       
Face bottom        2 has       141 nodes.                                       
Face left_w        3 has       273 nodes.                                       
Face right_e       5 has       282 nodes.                                       
Face back_n        6 has      9315 nodes.                                       
Face front_s       4 has      9315 nodes.            

Files:
-rw-r--r-- 1 tamiller sft 6.1M Feb  7 12:18 tet_slice.fehmn
-rw-r--r-- 1 tamiller sft 5.6M Feb  7 12:18 tet_slice.stor

-rw-r--r-- 1 tamiller sft 301K Feb  7 12:18 tet_slice_material.zone
-rw-r--r-- 1 tamiller sft 158K Feb  7 12:18 tet_slice_multi_mat.zone
-rw-r--r-- 1 tamiller sft 1.2M Feb  7 12:18 tet_slice_outside_vor.area
-rw-r--r-- 1 tamiller sft 210K Feb  7 12:18 tet_slice_outside.zone

-rw-r--r-- 1 tamiller sft 3.3M Feb  7 12:18 tet_slice_nodes.dat

-------------------------------------------------------------