SALT CAN 2D and 3D SLICES V2 
The octree portions have been smoothed into unstructured
February 8 2017

Source: Canister and Instrumentation Locations 11092016.pdf
Source data in inches, FEHM Mesh in meters
Mesh:  /scratch/sft/tam/SALT/canister_peter/slice_v2

  Zone CAN   1  
  Zone SALT  2  
  Zone AIR   3      
  Zone EDZ   4      
  Zone ROCK  5 

  Can center at 0,0 coordinate
  Can radius = .3048 meters (12 inches)
  distance from can to salt top = .6096 (24 inches)
  distance from wall to can = .6096 (24 inches)
  distance from can center to salt edge = 1.534 meters (60 inches)
  distance from wall to salt edge = 2.4384 meters (96 inches)
  distance from floor to ceiling = 2.4384 meters (96 inches)

  Extents:
   X   -6.6040  to 12.0904 meters  (-260 to 476 inches)  
   Z   -18.1864 to 18.3896 meters  (-716 to 724 inches)

  3D Slice with 3 stacked layers in Y direction
   Y   0 to .2 meters (0 to 3.937 inches) 

-------------------------------------------------------------
2D Triangle Mesh

nodes 12604
tri elements 24908 
Minimum Voronoi area  =  1.0354787E-03                                   
Maximum Voronoi area  =  1.1688361E-01   
Total   Voronoi area:    6.8376637E+02                                   

Material Zones:
Material    1 has       156 nodes. #nodes/nnodes is   0.123770227656E-01 
Material    2 has       668 nodes. #nodes/nnodes is   0.529990494251E-01 
Material    3 has      1777 nodes. #nodes/nnodes is   0.140986993909     
Material    4 has       845 nodes. #nodes/nnodes is   0.670422092080E-01 
Material    5 has      9158 nodes. #nodes/nnodes is   0.726594746113     

Boundary Nodes:
Face top           1 has        49 nodes.                                       
Face bottom        2 has        47 nodes.                                       
Face left_w        3 has        108 nodes.                                       
Face right_e       5 has        98 nodes.                                       

Files:
-rw-r--r-- 1 tamiller sft 1.7M Feb  8 09:59 tri_slice.fehmn
-rw-r--r-- 1 tamiller sft 4.1M Feb  8 09:59 tri_slice.stor
-rw-r--r-- 1 tamiller sft 136K Feb  8 09:59 tri_slice_material.zone
-rw-r--r-- 1 tamiller sft  32K Feb  8 09:59 tri_slice_multi_mat.zone
-rw-r--r-- 1 tamiller sft  20K Feb  8 09:59 tri_slice_outside_vor.area
-rw-r--r-- 1 tamiller sft 3.5K Feb  8 09:59 tri_slice_outside.zone
-rw-r--r-- 1 tamiller sft 1.3M Feb  8 09:59 tri_slice_nodes.dat


-------------------------------------------------------------
3D Tet Mesh 3 nodes thick in Y direction

nodes 37812 
tet elements 149448
Voronoi Volume min =   5.1773935E-05                                    
Voronoi Volume max =   1.1688361E-02                                    
Total Voronoi Volume:  1.3675327E+02                                   

Material Zones:
Material     1 has       468 nodes. #nodes/nnodes is   0.123770227656E-01 
Material     2 has      2004 nodes. #nodes/nnodes is   0.529990494251E-01 
Material     3 has      5331 nodes. #nodes/nnodes is   0.140986993909     
Material     4 has      2535 nodes. #nodes/nnodes is   0.670422092080E-01 
Material     5 has     27474 nodes. #nodes/nnodes is   0.726594746113     

Boundary Nodes:
Face top           1 has       147 nodes.                                       
Face bottom        2 has       141 nodes.                                       
Face left_w        3 has       324 nodes.                                       
Face right_e       5 has       294 nodes.                                       
Face back_n        6 has      12604 nodes.                                       
Face front_s       4 has      12604 nodes.            

Files:
-rw-r--r-- 1 tamiller sft 8.5M Feb  8 10:01 tet_slice.fehmn
-rw-r--r-- 1 tamiller sft 9.7M Feb  8 10:01 tet_slice.stor
-rw-r--r-- 1 tamiller sft 407K Feb  8 10:01 tet_slice_material.zone
-rw-r--r-- 1 tamiller sft 157K Feb  8 10:01 tet_slice_multi_mat.zone
-rw-r--r-- 1 tamiller sft 1.6M Feb  8 10:01 tet_slice_outside_vor.area
-rw-r--r-- 1 tamiller sft 281K Feb  8 10:01 tet_slice_outside.zone
-rw-r--r-- 1 tamiller sft 5.4M Feb  8 10:02 tet_slice_nodes.dat

-------------------------------------------------------------