This is a simple version of the Caldera - Rio mesh domain with 6 stacked surfaces, no refinement layers, single material There are 3 face sets, bottom (1), top (2), and sides (3) There are no 0 volume elements. There are no degenerate elements (0 length edges). This one is just a toy problem. The units could not be set for the simple version, the cell sizes are too big. The 5 materials represent 5 layers defined by input surfaces. The fourth and fifth layers, block 4 and 5 are the upper units and TK The third layer, block 3 is mostly TSF and Tk The second layer, block 2 is mostly Pal The first layer, block 1 corresponds with Pc Stacked Layers: 6 Number Elements: 411600 Number Nodes: 497538 Elements per layer: 82320 Nodes per layer: 82923
Material (layers) Cells Volume 100m from top 5 82320 0.1223645E+12 TSF middle and above 4 82320 0.1406358E+13 TSF and above 3 82320 0.7301481E+12 PAL 2 82320 0.1376521E+13 PC 1 82320 0.2836728E+13 Surfaces used for stacked hex mesh: 6 09S_topo_b_subset.inp 5 surf_topo_dwn100.inp 4 surf_tsf_mid_fix2.inp 3 04S_tsf_b_subset.inp 2 03S_pal_b_subset.inp 1 00_bot_3000.inp Version with 3 face sets, 1, 2, and 3 for all sides: -rw-r--r-- 1 tamiller sft 29773564 Mar 19 14:43 hex_allmat.exo -rw-r--r-- 1 tamiller sft 154734584 Mar 19 14:43 hex_allmat.exo.avs -rw-r--r-- 1 tamiller sft 89731552 Mar 19 14:43 hex_allmat.exo.gmv number of elements: 411600 number of nodes: 497538 number of element blocks: 5 number of side sets: 3 THE ELTSET exo_1 HAS 82320 ELEMENTS THE ELTSET exo_2 HAS 82320 ELEMENTS THE ELTSET exo_sides 3 HAS 6020 ELEMENTS Version with 6 face sets, 1 for each side. num_nodes = 497538 num_elem = 411600 num_el_blk = 5 num_side_sets = 6 -rw-r--r-- 1 tamiller sft 29774012 Mar 19 16:26 hex_allmat_fs6.exo -rw-r--r-- 1 tamiller sft 154734584 Mar 19 16:26 hex_allmat_fs6.exo.avs -rw-r--r-- 1 tamiller sft 89731552 Mar 19 16:26 hex_allmat_fs6.exo.gmv -rw-r--r-- 1 tamiller sft 75007 Mar 19 16:29 write_exo_allmat3.out -rw-r--r-- 1 tamiller sft 49882099 Mar 19 16:29 hex_allmat_fs6_ascii.exo THE ELTSET exo_1 bottom HAS 82320 ELEMENTS THE ELTSET exo_2 top HAS 82320 ELEMENTS THE ELTSET es3_east HAS 1050 ELEMENTS THE ELTSET es5_west HAS 1050 ELEMENTS THE ELTSET es4_north HAS 1960 ELEMENTS THE ELTSET es6_south HAS 1960 ELEMENTS SUMMARY VOLUME/AREA of ELEMENT COLORS for mohex ........................................................... Color Num. Elements Volume Fractional Volume 1 82320 0.2836728E+13 0.438299690 2 82320 0.1376521E+13 0.212684746 3 82320 0.7301481E+12 0.112814376 4 82320 0.1406358E+13 0.217294791 5 82320 0.1223645E+12 0.018906396 Total elements: 411600 Total Volume: 0.6472119E+13 # report on hex mesh quality -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 4 elements with aspect ratio b/w .5 and 1. : 411596 min aspect ratio = 0.4830E+00 max aspect ratio = 0.1000E+01 --------------------------------------- element volumes b/w 0.1000E+07 and 0.2228E+07: 82435 element volumes b/w 0.2228E+07 and 0.4964E+07: 4542 element volumes b/w 0.4964E+07 and 0.1106E+08: 104051 element volumes b/w 0.1106E+08 and 0.2465E+08: 127078 element volumes b/w 0.2465E+08 and 0.5491E+08: 93494 min volume = 1.0000000E+06 max volume = 5.4912871E+07 ----------------------------------------------------------- quality edge_max y -------------------------------------------- element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 82480 element norm edge length b/w .05 and .1 : 7178 element norm edge length b/w .1 and .2 : 99312 element norm edge length b/w .2 and .5 : 143862 element norm edge length b/w .5 and 1. : 78768 min max edge length = 0.1000E+03 max max edge length = 0.3703E+04 ----------------------------------------------------------- quality edge_min y -------------------------------------------- element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 0 element norm edge length b/w .5 and 1. : 411600 min min edge length = 0.6800E+02 max min edge length = 0.1252E+03 -----------------------------------------------------------