number of nodes = 17200 number of elements = 94792 Material 1 has 4000 nodes. #nodes/nnodes is 0.232558146119 Material 2 has 800 nodes. #nodes/nnodes is 0.465116277337E-01 Material 3 has 400 nodes. #nodes/nnodes is 0.232558138669E-01 Material 4 has 1200 nodes. #nodes/nnodes is 0.697674453259E-01 Material 5 has 6000 nodes. #nodes/nnodes is 0.348837196827 Material 6 has 800 nodes. #nodes/nnodes is 0.465116277337E-01 Material 7 has 4000 nodes. #nodes/nnodes is 0.232558146119 elements with aspect ratio b/w .2 and .5 : 26842 elements with aspect ratio b/w .5 and 1. : 64128 min aspect ratio = 0.6001E-05 max aspect ratio = 0.1166E+00 epsilonvol: 2.4817547E+00 --------------------------------------- element volumes b/w 0.1473E+05 and 0.9895E+05: 67 element volumes b/w 0.9895E+05 and 0.6645E+06: 2270 element volumes b/w 0.6645E+06 and 0.4462E+07: 1485 element volumes b/w 0.4462E+07 and 0.2996E+08: 0 element volumes b/w 0.2996E+08 and 0.2012E+09: 90970 min volume = 1.4734271E+04 max volume = 2.0122611E+08 ----------------------------------------------------------- 94792 total elements evaluated. *** Construct and Compress Sparse Matrix:3D *** *** Compress Area Coefficient Values *** AMatbld3d_stor: *****Negative Coefficients ****** AMatbld3d_stor: Total Number of Negative Coefficients 7 AMatbld3d_stor: Number of Significant Negative Coefs 7 AMatbld3d_stor: Number of 'zero' (< 10e-8 *max) coefs 0 Negative coef at row 4140 Column 4520 with value -8.1615390E-04 Negative coef at row 7598 Column 7978 with value -2.7384173E-03 Negative coef at row 7795 Column 8175 with value -8.1615390E-04 Negative coef at row 8636 Column 9056 with value -2.7384173E-03 Negative coef at row 11845 Column 12225 with value -2.7384173E-03 Negative coef at row 14355 Column 14735 with value -4.7909096E-03 Negative coef at row 16055 Column 16435 with value -2.7384173E-03 AMatbld3d_stor: npoints = 17200 ncoefs = 204424 AMatbld3d_stor: Number of unique coefs = 54042 AMatbld3d_stor: Maximum num. connections to a node = 15 AMatbld3d_stor: Volume min = 5.2338774E+07 AMatbld3d_stor: Volume max = 8.8327353E+08 AMatbld3d_stor: Total Volume: 1.0313790E+13 AMatbld3d_stor: abs(Aij/xij) min = 0.0000000E+00 AMatbld3d_stor: abs(Aij/xij) max = 7.8377798E+04 AMatbld3d_stor: (Aij/xij) max = 4.7909096E-03 AMatbld3d_stor: (Aij/xij) min = -7.8377798E+04 AMatbld3d_stor Matrix coefficient values stored as scalar area/distance AMatbld3d_stor Matrix compression used for graph and coefficient values ascii STOR file written with name tet.stor *** SPARSE COEFFICIENT MATRIX _astor SUCCESSFUL *** 3D Matrix Coefficient file written with name tet.stor -------- Original Message -------- Subject: RE: mesh from gslib points Date: Wed, 4 Sep 2013 22:39:58 +0000 From: Zunsheng Jiao To: Stauffer, Philip Phil, We could start with a 50 km X 50 km domain. Four corners for this domain: SW x240000 y4043000 SE x290000 y4043000 NE x290000 y4093000 NW x240000 y4093000 Thanks, John From: Stauffer, Philip [mailto:stauffer@lanl.gov] Sent: Wednesday, September 04, 2013 1:56 PM To: Zunsheng Jiao Subject: Fwd: mesh from gslib points John, Terry is working on it. there are some issues. How much of the domain do you need ? If we trim some of the edges it will be much better computationally. Not sure how eclipse computes on such a bad mesh. Not voronoi at all in some places. P -------- Original Message -------- Subject: mesh from gslib points Date: Wed, 4 Sep 2013 13:51:30 -0600 From: Miller, Terry A To: Stauffer, Philip H Hi Phil, I have created awk and lagrit scripts to correct point values, subset, then connect into an FEHM mesh. This is a NS slice, 2 elements wide. 30x exaggeration in Z. I had to cut the north end off where layers go up to the surface and can not connect delaunay. This mesh has a few neg ccoef, but they are on the outside of the mesh so should be ok. I can make a big box shape subset of this in the morning. /scratch/fwo/tam/wy_gslib_v01/subset_NS