* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V2.200 Linux m32 * * * date_compile: 2010/11/22 * * * Run Time: 2011/02/18 10:43:39 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen ********************************************************* * create hex grid *************************** * http://lagrit.lanl.gov/docs/CRTPTBRICK.html * * syntax: createpts/brick/xyz * /nx,ny,nz/xyz_mins / xyz_maxs/ 1,1,1 (cell_vertices)/ * /ijk switches/ijk ratio /(leave these off for regular spaces) * * Project: Wyoming Seismic with John Jiao 2011 * Key: SequenceFile Data: seis3d.seq * range FEET: * 475200.000000 to 493200.000000 * 465500.000000 to 499900.000000 * -12600.000000 to 0.000000 * range METERS: * 144840.96 to 150327.36 * 141884.4 to 152369.52 * -3840.48 to 0 * NOTE: There is a cut-out at min x,y corner that is aprox 450 meters * Increase min y to avoid this area * * State Plane feet, zone: 4904 * The well location is at X 482800, Y 476300 ft (147157.44, 145176.24 meters) * *The mesh domain should be: * X 475200 – 493200 ft * Y 467100 – 499900 ft * Z -1400 – -12600 ft elevation * (-426.72 meters to -3840.48 meters) * The target interval Weber Sandstone at the well for CO2 injection * ranges from -10600 to -11800 ft (elevation) or depth 11300 to 18500 ft in dept * -3230.88 to -3596.64 * * Target 50 m horizontal and 32 meter vertical near well * Data collection points were every 32 meters vertical * octree ratio length/sqrt(2) = height * 50/sqrt(2) = 35.35 * 45/sqrt(2) = 31.81 * 64/sqrt(2) = 45.25 * * select boundary coordinates within EV domain * use integer values that divide whole * use meters * X length 17500 feet, 5334 meters * 20*256=5120 * 19*256=4864 * increase x to cell center the well * need to reduce by one cell length define X0 144853. define X1 149717. * Y length 32000 feet, 9753.6 meters * 38*256=9728 * increase y min 512m, 2 cells so 36*256=9216 * increase y to center well in cell define Y0 142616. define Y1 151832. * Z length 11200 feet, 3413.76 meters * -11200 to -1400 feet, 3840.48 to 426.72 meters * 53*64=3392 106*32=3392 define Z0 -3840. define Z1 -448. define/NX/20 define/NY/37 define/NZ/107 define EVFILE evinput_brick.dat * evenly space points along x,y and z axis cmo/create/cmohex///hex createpts/brick/xyz/NX NY NZ/X0 Y0 Z0/X1 Y1 Z1/1,1,1/1,1,0/1. 1. 1. Number of nodes: 79180 Number of elements: 72504 Number of negative volume elements: 0 Total volume: 0.152051908608E+12 * color grid points and elements all color 1 cmo/setatt/cmohex/imt1/1,0,0/1 79180 values reset for attribute imt1 cmo/setatt/cmohex/itetclr/1,0,0/1 72504 values reset for attribute itetclr filter 1,0,0 FILTER:Use internal epsilonl value = 0.243337806231E-08 FILTER:Dudding 0 duplicate points. rmpoint compress 0 points removed and 0 elements removed. The new point count is 79180. The new element count is 72504. resetpts itp geniee finish * write the hex grid dump gmv brick.gmv cmohex cmo/modatt/-def-/-def-/ioflag/x finish dump avs brick.inp cmohex cmo/modatt/-def-/-def-/ioflag/x finish *------------------------------- * well object refine horizontal only * vertical spacing is already 32 meters define WELLX 147157.00 define WELLY 145176.00 define WELLX2 147158.00 define WELLY2 145177.00 define WELLTOP 0. define WELLBOT -5000. cmo/create/cmowell///hex createpts/brick/xyz/2 2 14/WELLX WELLY WELLBOT/WELLX2 WELLY2 WELLTOP/1,1,1 Number of nodes: 56 Number of elements: 13 Number of negative volume elements: 0 Total volume: 0.500000000000E+04 cmo setatt cmowell imt 15 56 values reset for attribute imt1 cmo setatt cmowell itetclr 15 13 values reset for attribute itetclr resetpts itp geniee finish dump gmv brick_well.gmv cmowell cmo/modatt/-def-/-def-/ioflag/x finish *------------------------------- addmesh append cmotmp cmohex cmowell dump gmv merge_hex_well.gmv cmotmp cmo/modatt/-def-/-def-/ioflag/x finish cmo delete cmotmp Released Mesh Object: cmotmp *------------------------------- * REFINE intersect_elements/cmohex/cmowell/in_obj cmo/select/cmohex finish kdtree/build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish cmo/addatt/cmohex/in_obj/VINT/scalar/nelements/linear/permanent//0/ finish Element Elems Searched Elements Found Percent Done 2 0 0 5 % 3 0 0 10 % 4 59 48 15 % 5 131 48 20 % 6 205 48 25 % 7 281 48 30 % 8 363 48 35 % 9 444 48 40 % 10 517 48 45 % 11 594 48 50 % 12 651 40 55 % 13 651 424 Total Done cmo/select/cmohex finish kdtree/release cmo/DELATT/cmohex/sbox finish cmo/DELATT/cmohex/v12 finish cmo/DELATT/cmohex/linkt finish cmo/DELATT/cmohex/v2 finish finish cmo select cmohex eltset/eref1/in_obj/gt 0 THE ELTSET eref1 HAS 424 ELEMENTS pset/pref1 eltset eref1 THE PSET pref1 HAS 963 POINTS refine/constant/imt1/linear/element/pset,get,pref1/-1.,0.,0./inclusive/amr 12 refine elements: refine hex : 1696 cmo/addatt/cmohex/itetpar/VINT/scalar/nelements/linear/permanent//0.0 finish cmo/addatt/cmohex/itetkid/VINT/scalar/nelements/linear/permanent//0.0 finish cmo/addatt/cmohex/itetlev/VINT/scalar/nelements/linear/permanent//0.0 finish cmo/addatt/cmohex/xradavg/VDOUBLE/scalar/nnodes/linear/temporary//0.0 finish Element iteration: 1 1696 Octree(PRD) refined elems: old= 72504 new= 79288 Dudding 10968 duplicate points. filter/1,0,0 FILTER:Use internal epsilonl value = 0.243337806231E-08 FILTER:Dudding 0 duplicate points. geniee finish cmo/DELATT/cmohex/xradavg finish dump gmv brick_lvl01.gmv cmohex cmo/modatt/-def-/-def-/ioflag/x finish cmo setatt cmohex in_obj 0 79288 values reset for attribute in_obj intersect_elements/cmohex/cmowell/in_obj cmo/select/cmohex finish kdtree/build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish intersect_elements using previously defined attribute: in_obj Element Elems Searched Elements Found Percent Done 2 0 0 5 % 3 0 0 10 % 4 116 48 15 % 5 262 48 20 % 6 414 48 25 % 7 550 48 30 % 8 681 48 35 % 9 821 48 40 % 10 968 48 45 % 11 1125 48 50 % 12 1246 40 55 % 13 1246 424 Total Done cmo/select/cmohex finish kdtree/release cmo/DELATT/cmohex/sbox finish cmo/DELATT/cmohex/v12 finish cmo/DELATT/cmohex/linkt finish cmo/DELATT/cmohex/v2 finish finish cmo select cmohex eltset/eref2/in_obj/gt 0 THE ELTSET eref2 HAS 424 ELEMENTS pset/pref2 eltset eref2 THE PSET pref2 HAS 963 POINTS refine/constant/imt1/linear/element/pset,get,pref2/-1.,0.,0./inclusive/amr 12 refine elements: refine hex : 2120 cmo/addatt/cmohex/xradavg/VDOUBLE/scalar/nnodes/linear/temporary//0.0 finish Element iteration: 1 1696 Octree(PRD) refined elems: old= 79288 new= 86072 Dudding 10968 duplicate points. filter/1,0,0 FILTER:Use internal epsilonl value = 0.243337806231E-08 FILTER:Dudding 0 duplicate points. geniee finish cmo/DELATT/cmohex/xradavg finish dump gmv brick_lvl02.gmv cmohex cmo/modatt/-def-/-def-/ioflag/x finish cmo setatt cmohex in_obj 0 86072 values reset for attribute in_obj intersect_elements/cmohex/cmowell/in_obj cmo/select/cmohex finish kdtree/build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish intersect_elements using previously defined attribute: in_obj Element Elems Searched Elements Found Percent Done 2 0 0 5 % 3 0 0 10 % 4 183 48 15 % 5 404 48 20 % 6 630 48 25 % 7 860 48 30 % 8 1073 48 35 % 9 1291 48 40 % 10 1529 48 45 % 11 1755 48 50 % 12 1944 40 55 % 13 1944 424 Total Done cmo/select/cmohex finish kdtree/release cmo/DELATT/cmohex/sbox finish cmo/DELATT/cmohex/v12 finish cmo/DELATT/cmohex/linkt finish cmo/DELATT/cmohex/v2 finish finish cmo select cmohex eltset/eref3/in_obj/gt 0 THE ELTSET eref3 HAS 424 ELEMENTS pset/pref3 eltset eref3 THE PSET pref3 HAS 963 POINTS refine/constant/imt1/linear/element/pset,get,pref3/-1.,0.,0./inclusive/amr 12 refine elements: refine hex : 2544 cmo/addatt/cmohex/xradavg/VDOUBLE/scalar/nnodes/linear/temporary//0.0 finish Element iteration: 1 1696 Octree(PRD) refined elems: old= 86072 new= 92856 Dudding 10968 duplicate points. filter/1,0,0 FILTER:Use internal epsilonl value = 0.243337806231E-08 FILTER:Dudding 0 duplicate points. geniee finish cmo/DELATT/cmohex/xradavg finish dump gmv brick_lvl03.gmv cmohex cmo/modatt/-def-/-def-/ioflag/x finish ***______DONE_______________*** grid2grid/tree_to_fe/cmo/cmohex cmo/copy/cmo/cmohex finish eltset/-parentset-/itetkid/gt/0 THE ELTSET -parentset- HAS 5088 ELEMENTS finish rmpoint/element/eltset,get,-parentset- Dudded 32904 points plus parents, and 5088 elements removed. finish rmpoint/compress 32904 points removed and 0 elements removed. The new point count is 97156. The new element count is 87768. finish resetpts/itp geniee finish finish eltset/-parentset-/delete ELTSET -parentset- DELETED finish quality epsilonl, epsilonaspect: 2.4333781E-09 1.4408832E-26 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 87768 min aspect ratio = 0.1000E+01 max aspect ratio = 0.1000E+01 epsilonvol: 3.3762306E-02 --------------------------------------- element volumes b/w 0.3277E+05 and 0.7528E+05: 6784 element volumes b/w 0.7528E+05 and 0.1730E+06: 5088 element volumes b/w 0.1730E+06 and 0.3973E+06: 0 element volumes b/w 0.3973E+06 and 0.9128E+06: 5088 element volumes b/w 0.9128E+06 and 0.2097E+07: 70808 element volumes b/w 0.9128E+06 and 0.2097E+07: 70808 min volume = 3.2768000E+04 max volume = 2.0971520E+06 ----------------------------------------------------------- 87768 total elements evaluated. finish cmo select cmo quality epsilonl, epsilonaspect: 2.4333781E-09 1.4408832E-26 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 87768 min aspect ratio = 0.1000E+01 max aspect ratio = 0.1000E+01 epsilonvol: 3.3762306E-02 --------------------------------------- element volumes b/w 0.3277E+05 and 0.7528E+05: 6784 element volumes b/w 0.7528E+05 and 0.1730E+06: 5088 element volumes b/w 0.1730E+06 and 0.3973E+06: 0 element volumes b/w 0.3973E+06 and 0.9128E+06: 5088 element volumes b/w 0.9128E+06 and 0.2097E+07: 70808 element volumes b/w 0.9128E+06 and 0.2097E+07: 70808 min volume = 3.2768000E+04 max volume = 2.0971520E+06 ----------------------------------------------------------- 87768 total elements evaluated. cmo status The current-mesh-object(CMO) is: cmo 1 Mesh Object name: cmohex number of nodes = 130060 number of elements = 92856 dimensions geometry = 3 element type = hex dimensions topology = 3 8 nodes 6 faces 12 edges boundary flag = 16000000 status = inactive NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo x 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 1.301E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 9.286E+04 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 8.000E+00 12 edges_per_eleme INT scalar scalar const perma l 1.200E+01 13 faces_per_eleme INT scalar scalar const perma l 6.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 2.433E-09 35 epsilona REAL scalar scalar const perma l 2.667E-05 36 epsilonv REAL scalar scalar const perma l 3.376E-02 37 ipointi INT scalar scalar const perma l 1.131E+05 38 ipointj INT scalar scalar const perma l 1.301E+05 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.449E+05 52 ymin REAL scalar scalar const perma l 1.426E+05 53 zmin REAL scalar scalar const perma l -3.840E+03 54 xmax REAL scalar scalar const perma l 1.497E+05 55 ymax REAL scalar scalar const perma l 1.518E+05 56 zmax REAL scalar scalar const perma l -4.480E+02 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 3.200E+01 59 number_of_psets INT scalar scalar const perma l 3.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 in_obj VINT scalar nelements linea perma agl 0.000E+00 67 itetpar VINT scalar nelements linea perma agl 0.000E+00 68 itetkid VINT scalar nelements linea perma agl 0.000E+00 69 itetlev VINT scalar nelements linea perma agl 0.000E+00 2 Mesh Object name: cmowell number of nodes = 56 number of elements = 13 dimensions geometry = 3 element type = hex dimensions topology = 3 8 nodes 6 faces 12 edges boundary flag = 16000000 status = inactive NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo x 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 5.600E+01 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 1.300E+01 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 8.000E+00 12 edges_per_eleme INT scalar scalar const perma l 1.200E+01 13 faces_per_eleme INT scalar scalar const perma l 6.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 1.110E-09 35 epsilona REAL scalar scalar const perma l 5.551E-06 36 epsilonv REAL scalar scalar const perma l 1.110E-09 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 5.600E+01 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.472E+05 52 ymin REAL scalar scalar const perma l 1.452E+05 53 zmin REAL scalar scalar const perma l -5.000E+03 54 xmax REAL scalar scalar const perma l 1.472E+05 55 ymax REAL scalar scalar const perma l 1.452E+05 56 zmax REAL scalar scalar const perma l 1.478E-12 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 3.200E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 3 Mesh Object name: cmo number of nodes = 97156 number of elements = 87768 dimensions geometry = 3 element type = hex dimensions topology = 3 8 nodes 6 faces 12 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo x 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 9.716E+04 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 8.777E+04 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 8.000E+00 12 edges_per_eleme INT scalar scalar const perma l 1.200E+01 13 faces_per_eleme INT scalar scalar const perma l 6.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 2.433E-09 35 epsilona REAL scalar scalar const perma l 2.667E-05 36 epsilonv REAL scalar scalar const perma l 3.376E-02 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 9.716E+04 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.449E+05 52 ymin REAL scalar scalar const perma l 1.426E+05 53 zmin REAL scalar scalar const perma l -3.840E+03 54 xmax REAL scalar scalar const perma l 1.497E+05 55 ymax REAL scalar scalar const perma l 1.518E+05 56 zmax REAL scalar scalar const perma l -4.480E+02 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 3.200E+01 59 number_of_psets INT scalar scalar const perma l 3.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 in_obj VINT scalar nelements linea perma agl 0.000E+00 67 itetpar VINT scalar nelements linea perma agl 0.000E+00 68 itetkid VINT scalar nelements linea perma agl 0.000E+00 69 itetlev VINT scalar nelements linea perma agl 0.000E+00 dump avs2 brick_ref.inp cmo cmo/modatt/-def-/-def-/ioflag/x finish dump gmv brick_ref.gmv cmo cmo/modatt/-def-/-def-/ioflag/x finish * write x,y,z points for EV * these meters need to be converted to feet cmo select cmo cmo printatt cmo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.448530000E+05 1.497170000E+05 4.864000000E+03 97156 yic 1.426160000E+05 1.518320000E+05 9.216000000E+03 97156 zic -3.840000000E+03 -4.480000000E+02 3.392000000E+03 97156 math/divide/cmo/xic/1 0 0/cmo/xic/0.3048 math/divide/cmo/yic/1 0 0/cmo/yic/0.3048 math/divide/cmo/zic/1 0 0/cmo/zic/0.3048 dump avs2 EVFILE cmo 1 0 0 0 0 cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt cmo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.752395013E+05 4.911975066E+05 1.595800525E+04 97156 yic 4.679002625E+05 4.981364829E+05 3.023622047E+04 97156 zic -1.259842520E+04 -1.469816273E+03 1.112860892E+04 97156 finish LaGriT successfully completed