* * Project: Wyoming Seismic with John Jiao 2011 * Key: SequenceFile Data: seis3d.seq * range FEET: * 475200.000000 to 493200.000000 * 465500.000000 to 499900.000000 * -12600.000000 to 0.000000 * range METERS: * 144840.96 to 150327.36 * 141884.4 to 152369.52 * -3840.48 to 0 * NOTE: There is a cut-out at min x,y corner that is aprox 450 meters * Increase min y to avoid this area * * State Plane feet, zone: 4904 * The well location is at X 482800, Y 476300 ft (147157.44, 145176.24 meters) * *The mesh domain should be: * X 475200 – 493200 ft * Y 467100 – 499900 ft * Z -1400 – -12600 ft elevation * (-426.72 meters to -3840.48 meters) * The target interval Weber Sandstone at the well for CO2 injection * ranges from -10600 to -11800 ft (elevation) or depth 11300 to 18500 ft in dept * -3230.88 to -3596.64 * * hex mesh in meters ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.448530000E+05 1.497170000E+05 4.864000000E+03 97156 yic 1.426160000E+05 1.518320000E+05 9.216000000E+03 97156 zic -3.840000000E+03 -4.480000000E+02 3.392000000E+03 97156 * hex mesh in feet ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.752395013E+05 4.911975066E+05 1.595800525E+04 97156 yic 4.679002625E+05 4.981364829E+05 3.023622047E+04 97156 zic -1.259842520E+04 -1.469816273E+03 1.112860892E+04 97156 connect noadd Coordinates of enclosing tetrahedron are: 0.14120D+06 0.13570D+06 -0.10624D+05 0.14120D+06 0.18178D+06 -0.21440D+04 0.14120D+06 0.13570D+06 0.63360D+04 0.16552D+06 0.14722D+06 -0.21440D+04 The mesh is now complete! The new point count is 97156. The new element count is 540932. epsilonl, epsilonaspect: 2.4333781E-09 1.4408832E-26 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 113834 elements with aspect ratio b/w .2 and .5 : 355578 elements with aspect ratio b/w .5 and 1. : 71520 min aspect ratio = 0.1310E+00 max aspect ratio = 0.1000E+01 epsilonvol: 3.3762306E-02 --------------------------------------- element volumes b/w 0.5461E+04 and 0.1255E+05: 50305 element volumes b/w 0.1255E+05 and 0.2883E+05: 25006 element volumes b/w 0.2883E+05 and 0.6622E+05: 10393 element volumes b/w 0.6622E+05 and 0.1521E+06: 25144 element volumes b/w 0.1521E+06 and 0.3495E+06: 430084 element volumes b/w 0.1521E+06 and 0.3495E+06: 430084 min volume = 5.4613333E+03 max volume = 3.4952533E+05 ----------------------------------------------------------- 540932 total elements evaluated. ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH vorvol 1.638399998E+04 2.097152000E+06 2.080768000E+06 97156 cmo delete cmotmp Released Mesh Object: cmotmp * set materials imt (from EV) * set well locations * X 482800, Y 476300 ft (147157.44, 145176.24 meters) * The target interval Weber Sandstone at the well location for * CO2 injection ranges from -10600 to -11800 ft (elevation) * -3230.88 to -3596.64 meters define MATNO 50 define/XMIN/147150.00 define/XMAX/147160.00 define/YMIN/145170.00 define/YMAX/145180.00 define/ZMIN/-5000. define/ZMAX/0. pset/pxy/geom/xyz/1,0,0/XMIN YMIN ZMIN/XMAX YMAX ZMAX/ THE PSET pxy HAS 107 POINTS define MATNO 51 define/ZMIN/-3597. define/ZMAX/-3230. pset/pinj/geom/xyz/1,0,0/XMIN YMIN ZMIN/XMAX YMAX ZMAX/ THE PSET pinj HAS 12 POINTS cmo printatt cmotet -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 97156 scalar 1 1 0 1 vector 3 3 0 1 nnodes 97156 97156 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 540932 540932 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 4 4 0 1 edges_per_element 6 6 0 1 faces_per_element 4 4 0 1 isetwd 0 2 2 97156 ialias 0 0 0 97156 imt1 1 13 12 97156 itp1 0 10 10 97156 icr1 0 0 0 97156 isn1 0 0 0 97156 xic 1.448530000E+05 1.497170000E+05 4.864000000E+03 97156 yic 1.426160000E+05 1.518320000E+05 9.216000000E+03 97156 zic -3.840000000E+03 -4.480000000E+02 3.392000000E+03 97156 xtetwd 0 0 0 540932 itetclr 1 1 0 540932 itettyp 5 5 0 540932 itetoff 0 2163724 2163724 540932 jtetoff 0 2163724 2163724 540932 itet 1 97156 97155 540932x4 jtet 1 16000000 15999999 540932x4 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 2.433378062E-09 2.433378062E-09 0.000000000E+00 1 epsilona 2.666729415E-05 2.666729415E-05 0.000000000E+00 1 epsilonv 3.376230597E-02 3.376230597E-02 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 97156 97156 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.448530000E+05 1.448530000E+05 0.000000000E+00 1 ymin 1.426160000E+05 1.426160000E+05 0.000000000E+00 1 zmin -3.840000000E+03 -3.840000000E+03 0.000000000E+00 1 xmax 1.497170000E+05 1.497170000E+05 0.000000000E+00 1 ymax 1.518320000E+05 1.518320000E+05 0.000000000E+00 1 zmax -4.480000000E+02 -4.480000000E+02 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 2 2 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 vorvol 1.638399998E+04 2.097152000E+06 2.080768000E+06 97156 iwell 0 51 51 97156 *** Write FEHMN GEOM AND ZONE FILES *** *********dump_material_lists******** Minimum material ID value = 1 Maximum material ID value = 13 Total possible materials = 13 Material 1 has 5254 nodes. #nodes/nnodes is 0.540779791772E-01 Material 2 has 4026 nodes. #nodes/nnodes is 0.414385125041E-01 Material 3 has 10764 nodes. #nodes/nnodes is 0.110790893435 Material 4 has 3051 nodes. #nodes/nnodes is 0.314031057060E-01 Material 5 has 3180 nodes. #nodes/nnodes is 0.327308662236E-01 Material 6 has 4695 nodes. #nodes/nnodes is 0.483243428171E-01 Material 7 has 6997 nodes. #nodes/nnodes is 0.720181986690E-01 Material 8 has 5329 nodes. #nodes/nnodes is 0.548499338329E-01 Material 9 has 12344 nodes. #nodes/nnodes is 0.127053394914 Material 10 has 9940 nodes. #nodes/nnodes is 0.102309688926 Material 11 has 3804 nodes. #nodes/nnodes is 0.391535274684E-01 Material 12 has 6347 nodes. #nodes/nnodes is 0.653279274702E-01 Material 13 has 21425 nodes. #nodes/nnodes is 0.220521628857 *********dump_interface_list******** *********dump_multi_material_list******** Material 1 has 4915 multi-material connections. Material 2 has 9742 multi-material connections. Material 3 has 9425 multi-material connections. Material 4 has 9170 multi-material connections. Material 5 has 9115 multi-material connections. Material 6 has 8983 multi-material connections. Material 7 has 8922 multi-material connections. Material 8 has 8927 multi-material connections. Material 9 has 8654 multi-material connections. Material 10 has 8248 multi-material connections. Material 11 has 8005 multi-material connections. Material 12 has 7947 multi-material connections. Material 13 has 3981 multi-material connections. log/tty/off finish *********dump_outside_list******** Voronoi Areas used for outside faces. Face top 1 has 908 nodes. top Sum Voronoi Area_x Area_y Area_z 0.2949120E+06 0.1556480E+06 0.4482662E+08 Face bottom 2 has 908 nodes. bottom Sum Voronoi Area_x Area_y Area_z 0.2949120E+06 0.1556480E+06 0.4482662E+08 Face left_w 3 has 3959 nodes. left_w Sum Voronoi Area_x Area_y Area_z 0.3126067E+08 0.8683520E+06 0.2359296E+07 Face right_e 5 has 3959 nodes. right_e Sum Voronoi Area_x Area_y Area_z 0.3126067E+08 0.8683520E+06 0.2359296E+07 Face back_n 6 has 2140 nodes. back_n Sum Voronoi Area_x Area_y Area_z 0.8683520E+06 0.1649869E+08 0.1245184E+07 Face front_s 4 has 2140 nodes. front_s Sum Voronoi Area_x Area_y Area_z 0.8683520E+06 0.1649869E+08 0.1245184E+07 *** Construct and Compress Sparse Matrix:3D *** *** Compress Area Coefficient Values *** AMatbld3d_stor: *****Zero Negative Coefficients ****** AMatbld3d_stor: Number of 'zero' (< 10e-8*max) coefs 0 AMatbld3d_stor: npoints = 97156 n connections = 681486 AMatbld3d_stor: Number of written coefs = 28 AMatbld3d_stor: Maximum num. connections to a node = 9 AMatbld3d_stor: Volume min = 1.6384000E+04 AMatbld3d_stor: Volume max = 2.0971520E+06 AMatbld3d_stor: Total Volume: 1.5205191E+11 AMatbld3d_stor: abs(Aij/xij) min = 0.0000000E+00 AMatbld3d_stor: abs(Aij/xij) max = 2.0480000E+03 AMatbld3d_stor: (Aij/xij) max = 0.0000000E+00 AMatbld3d_stor: (Aij/xij) min = -2.0480000E+03 Compression used for graph and coefficient values The area coefficient values were written as scalar area/distance ascii STOR file written with name tet.stor *** SPARSE COEFFICIENT MATRIX _astor SUCCESSFUL *** finish LaGriT successfully completed