* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.200 Linux m64 * * * date_compile: 2016/10/25 Ubu gf * * * Run Time: 2016/Nov 16 10:12:47 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # Creates a 3D 3D 3D ice wedge # read the outer polygon points (no elements) # connect points into flat shape of triangles cmo/create/mo///triplane read/avs/poly_sim1.inp/mo cmo/status/brief The current-mesh-object(CMO) is: mo 1 Mesh Object name: mo number of nodes = 12 number of elements = 0 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish triangulate/counterclockwise filter/1,0,0 FILTER:Use internal epsilonl value = 0.783989179046E-11 FILTER:Dudding 2 duplicate points. finish rmpoint/compress 2 points removed and 0 elements removed. The new point count is 10. The new element count is 10. finish resetpts/itp geniee finish finish cmo/setatt/mo/imt/1,0,0/1 10 values reset for attribute imt1 cmo/setatt/mo/itetclr/1,0,0/1 10 values reset for attribute itetclr resetpts/itp geniee finish dump/tmp_poly_tri1.inp/mo dump/avs/tmp_poly_tri1.inp/mo cmo/modatt/-def-/-def-/ioflag/x finish finish # check triangulation quality epsilonl, epsilonaspect: 7.8398918E-12 4.8187035E-34 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 10 min aspect ratio = 0.1245E+00 max aspect ratio = 0.1862E+00 epsilonvol: 2.7680881E-10 --------------------------------------- element volumes b/w 0.8115E+01 and 0.8778E+01: 2 element volumes b/w 0.8778E+01 and 0.9496E+01: 2 element volumes b/w 0.9496E+01 and 0.1027E+02: 2 element volumes b/w 0.1027E+02 and 0.1111E+02: 2 element volumes b/w 0.1111E+02 and 0.1202E+02: 2 min volume = 8.1148746E+00 max volume = 1.2020986E+01 ----------------------------------------------------------- 10 total elements evaluated. # read the inner polygon points (no elements) # connect points into flat shape of triangles cmo/create/mo_inner///triplane read/avs/poly_sim2.inp/mo_inner cmo/status/brief The current-mesh-object(CMO) is: mo_inner 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 0 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish triangulate/counterclockwise filter/1,0,0 FILTER:Use internal epsilonl value = 0.678806429908E-11 FILTER:Dudding 0 duplicate points. finish rmpoint/compress 0 points removed and 0 elements removed. The new point count is 5. The new element count is 3. finish resetpts/itp geniee finish finish cmo/setatt/mo_inner/imt/1,0,0/2 5 values reset for attribute imt1 cmo/setatt/mo_inner/itetclr/1,0,0/2 3 values reset for attribute itetclr resetpts/itp geniee finish dump/tmp_poly_tri2.inp/mo_inner dump/avs/tmp_poly_tri2.inp/mo_inner cmo/modatt/-def-/-def-/ioflag/x finish finish ############### CHECK tri surfs ############# # the number of triangles is related to number of poly points cmo select mo quality epsilonl, epsilonaspect: 7.8398918E-12 4.8187035E-34 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 0 elements with aspect ratio b/w .5 and 1. : 10 min aspect ratio = 0.1245E+00 max aspect ratio = 0.1862E+00 epsilonvol: 2.7680881E-10 --------------------------------------- element volumes b/w 0.8115E+01 and 0.8778E+01: 2 element volumes b/w 0.8778E+01 and 0.9496E+01: 2 element volumes b/w 0.9496E+01 and 0.1027E+02: 2 element volumes b/w 0.1027E+02 and 0.1111E+02: 2 element volumes b/w 0.1111E+02 and 0.1202E+02: 2 min volume = 8.1148746E+00 max volume = 1.2020986E+01 ----------------------------------------------------------- 10 total elements evaluated. cmo select mo_inner quality epsilonl, epsilonaspect: 6.7880643E-12 3.1277918E-34 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 1 elements with aspect ratio b/w .5 and 1. : 2 min aspect ratio = 0.4301E+00 max aspect ratio = 0.8930E+00 epsilonvol: 2.0751604E-10 --------------------------------------- element volumes b/w 0.5788E+02 and 0.6948E+02: 1 element volumes b/w 0.6948E+02 and 0.8340E+02: 0 element volumes b/w 0.8340E+02 and 0.1001E+03: 1 element volumes b/w 0.1001E+03 and 0.1202E+03: 0 element volumes b/w 0.1202E+03 and 0.1442E+03: 1 min volume = 5.7883014E+01 max volume = 1.4422632E+02 ----------------------------------------------------------- 3 total elements evaluated. # Both shapes should be within same area, 2nd poly inside cmo printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 10 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 10 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 10 cmo printatt mo_inner -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.039648028E+02 1.257617409E+02 2.179693807E+01 5 yic 8.646822088E+01 1.079033007E+02 2.143507983E+01 5 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 5 # Write merged poly shapes addmesh/merge/mo_merge/mo/mo_inner dump/tmp_poly.inp/mo_merge dump/avs/tmp_poly.inp/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish finish # There should be 2 materials cmo/printatt/mo_merge/imt/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH imt1 1 2 1 15 cmo/printatt/mo_merge/itetclr/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 2 1 13 ############################################# # Break big triangles into smaller for better distribution cmo select mo_merge massage/5/1.e-5/1.e-5/strictmergelength nodes in point set = 15 recon/0/0.10000000E-04/ RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 3 Recon2d: iteration number= 2 number of flips= 1 RECON: done. finish nodes in point set = 15 SGD: 0 total relaxations on point set of 15 indept. nodes. nodes in point set = 15 Face iteration, number of faces: 1 4 Face iteration, number of faces: 1 7 Face iteration, number of faces: 1 13 Face iteration, number of faces: 1 15 Face iteration, number of faces: 1 14 Face iteration, number of faces: 1 15 Face iteration, number of faces: 1 10 Face iteration, number of faces: 1 9 Face iteration, number of faces: 1 8 Face iteration, number of faces: 1 4 Face iteration, number of faces: 1 3 Face iteration, number of faces: 1 1 recon/0/0.10000000E-04/ RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 21 Recon2d: iteration number= 2 number of flips= 5 RECON: done. finish smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.8130812E-01 Max. area BEFORE smoothing= 0.5382970E+01 Iteration= 1; root mean square error= 0.3501815E+00 Iteration= 2; root mean square error= 0.2321787E+00 Iteration= 3; root mean square error= 0.9944111E-01 Iteration= 4; root mean square error= 0.3140864E-01 Iteration= 5; root mean square error= 0.1545526E-01 Iteration= 6; root mean square error= 0.1060094E-01 Iteration= 7; root mean square error= 0.7722695E-02 Iteration= 8; root mean square error= 0.5710014E-02 Iteration= 9; root mean square error= 0.4253446E-02 Iteration= 10; root mean square error= 0.3183930E-02 Min. area AFTER smoothing= 0.5173236E+00 Max. area AFTER smoothing= 0.5363154E+01 recon 0 RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 5 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.2534760E+00 Max. area BEFORE smoothing= 0.5363154E+01 Iteration= 1; root mean square error= 0.1045687E+00 Iteration= 2; root mean square error= 0.5154443E-01 Iteration= 3; root mean square error= 0.1774253E-01 Iteration= 4; root mean square error= 0.3717066E-02 Iteration= 5; root mean square error= 0.1064783E-02 Iteration= 6; root mean square error= 0.6099670E-03 Min. area AFTER smoothing= 0.4874562E+00 Max. area AFTER smoothing= 0.5364982E+01 recon 0 RECON2D reconnection loop2d: 1 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.4874562E+00 Max. area BEFORE smoothing= 0.5364982E+01 Iteration= 1; root mean square error= 0.4508583E-03 Iteration= 2; root mean square error= 0.3424542E-03 Iteration= 3; root mean square error= 0.2609514E-03 Iteration= 4; root mean square error= 0.1991160E-03 Iteration= 5; root mean square error= 0.1521109E-03 Iteration= 6; root mean square error= 0.1163311E-03 Iteration= 7; root mean square error= 0.8906198E-04 Iteration= 8; root mean square error= 0.6825449E-04 Iteration= 9; root mean square error= 0.5235950E-04 Iteration= 10; root mean square error= 0.4020393E-04 Iteration= 11; root mean square error= 0.3089832E-04 Iteration= 12; root mean square error= 0.2376726E-04 Iteration= 13; root mean square error= 0.1829727E-04 Iteration= 14; root mean square error= 0.1409748E-04 Iteration= 15; root mean square error= 0.1087003E-04 Iteration= 16; root mean square error= 0.8387626E-05 Iteration= 17; root mean square error= 0.6476682E-05 Iteration= 18; root mean square error= 0.5004459E-05 Iteration= 19; root mean square error= 0.3869359E-05 Min. area AFTER smoothing= 0.4874862E+00 Max. area AFTER smoothing= 0.5364880E+01 recon 0 RECON2D reconnection loop2d: 1 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.4874862E+00 Max. area BEFORE smoothing= 0.5364880E+01 Iteration= 1; root mean square error= 0.2993537E-05 Iteration= 2; root mean square error= 0.2317291E-05 Iteration= 3; root mean square error= 0.1794791E-05 Iteration= 4; root mean square error= 0.1390823E-05 Iteration= 5; root mean square error= 0.1078306E-05 Iteration= 6; root mean square error= 0.8363978E-06 Iteration= 7; root mean square error= 0.6490417E-06 Iteration= 8; root mean square error= 0.5038604E-06 Iteration= 9; root mean square error= 0.3913048E-06 Iteration= 10; root mean square error= 0.3040025E-06 Iteration= 11; root mean square error= 0.2362580E-06 Iteration= 12; root mean square error= 0.1836683E-06 Iteration= 13; root mean square error= 0.1428273E-06 Iteration= 14; root mean square error= 0.1110988E-06 Iteration= 15; root mean square error= 0.8644113E-07 Iteration= 16; root mean square error= 0.6727249E-07 Iteration= 17; root mean square error= 0.5236647E-07 Iteration= 18; root mean square error= 0.4077193E-07 Iteration= 19; root mean square error= 0.3175084E-07 Iteration= 20; root mean square error= 0.2473030E-07 Min. area AFTER smoothing= 0.4874862E+00 Max. area AFTER smoothing= 0.5364869E+01 recon 0 RECON2D reconnection loop2d: 1 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.4874862E+00 Max. area BEFORE smoothing= 0.5364869E+01 Iteration= 1; root mean square error= 0.1926541E-07 Iteration= 2; root mean square error= 0.1501055E-07 Iteration= 3; root mean square error= 0.1169715E-07 Iteration= 4; root mean square error= 0.9116400E-08 Iteration= 5; root mean square error= 0.7105974E-08 Iteration= 6; root mean square error= 0.5539565E-08 Iteration= 7; root mean square error= 0.4318932E-08 Iteration= 8; root mean square error= 0.3367619E-08 Iteration= 9; root mean square error= 0.2626095E-08 Iteration= 10; root mean square error= 0.2048046E-08 Iteration= 11; root mean square error= 0.1597358E-08 Iteration= 12; root mean square error= 0.1245945E-08 Iteration= 13; root mean square error= 0.9719222E-09 Iteration= 14; root mean square error= 0.7582092E-09 Iteration= 15; root mean square error= 0.5915341E-09 Iteration= 16; root mean square error= 0.4615187E-09 Iteration= 17; root mean square error= 0.3601018E-09 Iteration= 18; root mean square error= 0.2809838E-09 Iteration= 19; root mean square error= 0.2192603E-09 Iteration= 20; root mean square error= 0.1711049E-09 Min. area AFTER smoothing= 0.4874862E+00 Max. area AFTER smoothing= 0.5364869E+01 recon 0 RECON2D reconnection loop2d: 1 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 118 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.4874862E+00 Max. area BEFORE smoothing= 0.5364869E+01 Iteration= 1; root mean square error= 0.1335266E-09 Iteration= 2; root mean square error= 0.1042081E-09 Iteration= 3; root mean square error= 0.8133613E-10 Iteration= 4; root mean square error= 0.6347827E-10 Iteration= 5; root mean square error= 0.4954339E-10 Iteration= 6; root mean square error= 0.3867376E-10 Iteration= 7; root mean square error= 0.3018413E-10 Iteration= 8; root mean square error= 0.2356558E-10 Iteration= 9; root mean square error= 0.1839383E-10 Iteration= 10; root mean square error= 0.1435094E-10 Iteration= 11; root mean square error= 0.1120632E-10 Iteration= 12; root mean square error= 0.8746978E-11 Iteration= 13; root mean square error= 0.6832093E-11 Iteration= 14; root mean square error= 0.5326741E-11 Iteration= 15; root mean square error= 0.4165484E-11 Iteration= 16; root mean square error= 0.3250399E-11 Iteration= 17; root mean square error= 0.2537175E-11 Iteration= 18; root mean square error= 0.1980226E-11 Iteration= 19; root mean square error= 0.1546212E-11 Iteration= 20; root mean square error= 0.1210866E-11 Min. area AFTER smoothing= 0.4874862E+00 Max. area AFTER smoothing= 0.5364869E+01 recon 0 RECON2D reconnection loop2d: 1 RECON: done. massage/1/1.e-5/1.e-5/strictmergelength nodes in point set = 118 recon/0/0.10000000E-04/ RECON2D reconnection loop2d: 1 RECON: done. finish nodes in point set = 118 SGD: 0 total relaxations on point set of 118 indept. nodes. nodes in point set = 118 Face iteration, number of faces: 1 56 Face iteration, number of faces: 1 54 Face iteration, number of faces: 1 76 Face iteration, number of faces: 1 95 Face iteration, number of faces: 1 102 Face iteration, number of faces: 1 127 Face iteration, number of faces: 1 133 Face iteration, number of faces: 1 131 Face iteration, number of faces: 1 154 Face iteration, number of faces: 1 120 Face iteration, number of faces: 1 104 Face iteration, number of faces: 1 48 Face iteration, number of faces: 1 3 recon/0/0.10000000E-04/ RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 143 RECON: done. finish smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.3482207E-01 Max. area BEFORE smoothing= 0.3842439E+00 Iteration= 1; root mean square error= 0.6994693E-01 Iteration= 2; root mean square error= 0.2855917E-01 Iteration= 3; root mean square error= 0.1496082E-01 Iteration= 4; root mean square error= 0.1063824E-01 Iteration= 5; root mean square error= 0.8672877E-02 Iteration= 6; root mean square error= 0.7520058E-02 Iteration= 7; root mean square error= 0.6750618E-02 Iteration= 8; root mean square error= 0.6190769E-02 Iteration= 9; root mean square error= 0.5757644E-02 Iteration= 10; root mean square error= 0.5406993E-02 Iteration= 11; root mean square error= 0.5113259E-02 Iteration= 12; root mean square error= 0.4860792E-02 Iteration= 13; root mean square error= 0.4639521E-02 Iteration= 14; root mean square error= 0.4442675E-02 Iteration= 15; root mean square error= 0.4265513E-02 Iteration= 16; root mean square error= 0.4104596E-02 Iteration= 17; root mean square error= 0.3957348E-02 Iteration= 18; root mean square error= 0.3821788E-02 Iteration= 19; root mean square error= 0.3696353E-02 Iteration= 20; root mean square error= 0.3579785E-02 Iteration= 21; root mean square error= 0.3471051E-02 Iteration= 22; root mean square error= 0.3369293E-02 Iteration= 23; root mean square error= 0.3273787E-02 Iteration= 24; root mean square error= 0.3183912E-02 Iteration= 25; root mean square error= 0.3099135E-02 Min. area AFTER smoothing= 0.6482923E-01 Max. area AFTER smoothing= 0.3484086E+00 recon 0 RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 61 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.3256734E-01 Max. area BEFORE smoothing= 0.3404630E+00 Iteration= 1; root mean square error= 0.4050654E-01 Iteration= 2; root mean square error= 0.1495767E-01 Iteration= 3; root mean square error= 0.6862747E-02 Iteration= 4; root mean square error= 0.4766985E-02 Iteration= 5; root mean square error= 0.3921341E-02 Iteration= 6; root mean square error= 0.3463138E-02 Iteration= 7; root mean square error= 0.3174353E-02 Iteration= 8; root mean square error= 0.2974274E-02 Iteration= 9; root mean square error= 0.2825223E-02 Iteration= 10; root mean square error= 0.2707392E-02 Iteration= 11; root mean square error= 0.2609692E-02 Iteration= 12; root mean square error= 0.2525641E-02 Iteration= 13; root mean square error= 0.2451299E-02 Iteration= 14; root mean square error= 0.2384178E-02 Iteration= 15; root mean square error= 0.2322642E-02 Iteration= 16; root mean square error= 0.2265578E-02 Iteration= 17; root mean square error= 0.2212200E-02 Iteration= 18; root mean square error= 0.2161933E-02 Iteration= 19; root mean square error= 0.2114344E-02 Iteration= 20; root mean square error= 0.2069100E-02 Iteration= 21; root mean square error= 0.2025935E-02 Iteration= 22; root mean square error= 0.1984634E-02 Iteration= 23; root mean square error= 0.1945023E-02 Iteration= 24; root mean square error= 0.1906951E-02 Iteration= 25; root mean square error= 0.1870292E-02 Min. area AFTER smoothing= 0.6460266E-01 Max. area AFTER smoothing= 0.3205507E+00 recon 0 RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 17 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.3586618E-01 Max. area BEFORE smoothing= 0.3205507E+00 Iteration= 1; root mean square error= 0.2019738E-01 Iteration= 2; root mean square error= 0.8883347E-02 Iteration= 3; root mean square error= 0.4200889E-02 Iteration= 4; root mean square error= 0.2840912E-02 Iteration= 5; root mean square error= 0.2366075E-02 Iteration= 6; root mean square error= 0.2145776E-02 Iteration= 7; root mean square error= 0.2017508E-02 Iteration= 8; root mean square error= 0.1929690E-02 Iteration= 9; root mean square error= 0.1862668E-02 Iteration= 10; root mean square error= 0.1807641E-02 Iteration= 11; root mean square error= 0.1760192E-02 Iteration= 12; root mean square error= 0.1717906E-02 Iteration= 13; root mean square error= 0.1679365E-02 Iteration= 14; root mean square error= 0.1643682E-02 Iteration= 15; root mean square error= 0.1610270E-02 Iteration= 16; root mean square error= 0.1578721E-02 Iteration= 17; root mean square error= 0.1548740E-02 Iteration= 18; root mean square error= 0.1520107E-02 Iteration= 19; root mean square error= 0.1492653E-02 Iteration= 20; root mean square error= 0.1466243E-02 Iteration= 21; root mean square error= 0.1440769E-02 Iteration= 22; root mean square error= 0.1416145E-02 Iteration= 23; root mean square error= 0.1392295E-02 Iteration= 24; root mean square error= 0.1369158E-02 Iteration= 25; root mean square error= 0.1346681E-02 Min. area AFTER smoothing= 0.6829648E-01 Max. area AFTER smoothing= 0.3205547E+00 recon 0 RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 9 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.6829648E-01 Max. area BEFORE smoothing= 0.3205547E+00 Iteration= 1; root mean square error= 0.1233951E-01 Iteration= 2; root mean square error= 0.5220556E-02 Iteration= 3; root mean square error= 0.2410687E-02 Iteration= 4; root mean square error= 0.1762165E-02 Iteration= 5; root mean square error= 0.1542690E-02 Iteration= 6; root mean square error= 0.1436204E-02 Iteration= 7; root mean square error= 0.1371341E-02 Iteration= 8; root mean square error= 0.1325326E-02 Iteration= 9; root mean square error= 0.1289180E-02 Iteration= 10; root mean square error= 0.1258790E-02 Iteration= 11; root mean square error= 0.1232051E-02 Iteration= 12; root mean square error= 0.1207794E-02 Iteration= 13; root mean square error= 0.1185325E-02 Iteration= 14; root mean square error= 0.1164207E-02 Iteration= 15; root mean square error= 0.1144154E-02 Iteration= 16; root mean square error= 0.1124971E-02 Iteration= 17; root mean square error= 0.1106519E-02 Iteration= 18; root mean square error= 0.1088698E-02 Iteration= 19; root mean square error= 0.1071431E-02 Iteration= 20; root mean square error= 0.1054659E-02 Iteration= 21; root mean square error= 0.1038336E-02 Iteration= 22; root mean square error= 0.1022425E-02 Iteration= 23; root mean square error= 0.1006896E-02 Iteration= 24; root mean square error= 0.9917224E-03 Iteration= 25; root mean square error= 0.9768831E-03 Min. area AFTER smoothing= 0.6829638E-01 Max. area AFTER smoothing= 0.3229747E+00 recon 0 RECON2D reconnection loop2d: 1 Recon2d: iteration number= 1 number of flips= 3 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.6829638E-01 Max. area BEFORE smoothing= 0.3229747E+00 Iteration= 1; root mean square error= 0.7461773E-02 Iteration= 2; root mean square error= 0.3480700E-02 Iteration= 3; root mean square error= 0.1789101E-02 Iteration= 4; root mean square error= 0.1333180E-02 Iteration= 5; root mean square error= 0.1142617E-02 Iteration= 6; root mean square error= 0.1042698E-02 Iteration= 7; root mean square error= 0.9845656E-03 Iteration= 8; root mean square error= 0.9468811E-03 Iteration= 9; root mean square error= 0.9196848E-03 Iteration= 10; root mean square error= 0.8981706E-03 Iteration= 11; root mean square error= 0.8799338E-03 Iteration= 12; root mean square error= 0.8637185E-03 Iteration= 13; root mean square error= 0.8488370E-03 Iteration= 14; root mean square error= 0.8348928E-03 Iteration= 15; root mean square error= 0.8216456E-03 Iteration= 16; root mean square error= 0.8089425E-03 Iteration= 17; root mean square error= 0.7966819E-03 Iteration= 18; root mean square error= 0.7847934E-03 Iteration= 19; root mean square error= 0.7732269E-03 Iteration= 20; root mean square error= 0.7619451E-03 Iteration= 21; root mean square error= 0.7509199E-03 Iteration= 22; root mean square error= 0.7401297E-03 Iteration= 23; root mean square error= 0.7295570E-03 Iteration= 24; root mean square error= 0.7191880E-03 Iteration= 25; root mean square error= 0.7090111E-03 Min. area AFTER smoothing= 0.6829631E-01 Max. area AFTER smoothing= 0.3234352E+00 recon 0 RECON2D reconnection loop2d: 1 RECON: done. smooth/position/esug/1,0,0 SMOOTH: position option nodes in point set = 1321 SMOOTH: Smooth 2D triangular mesh using ESUG Min. area BEFORE smoothing= 0.6829631E-01 Max. area BEFORE smoothing= 0.3234352E+00 Iteration= 1; root mean square error= 0.6990167E-03 Iteration= 2; root mean square error= 0.6891967E-03 Iteration= 3; root mean square error= 0.6795440E-03 Iteration= 4; root mean square error= 0.6700524E-03 Iteration= 5; root mean square error= 0.6607165E-03 Iteration= 6; root mean square error= 0.6515314E-03 Iteration= 7; root mean square error= 0.6424927E-03 Iteration= 8; root mean square error= 0.6335964E-03 Iteration= 9; root mean square error= 0.6248389E-03 Iteration= 10; root mean square error= 0.6162166E-03 Iteration= 11; root mean square error= 0.6077264E-03 Iteration= 12; root mean square error= 0.5993654E-03 Iteration= 13; root mean square error= 0.5911307E-03 Iteration= 14; root mean square error= 0.5830196E-03 Iteration= 15; root mean square error= 0.5750296E-03 Iteration= 16; root mean square error= 0.5671583E-03 Iteration= 17; root mean square error= 0.5594035E-03 Iteration= 18; root mean square error= 0.5517628E-03 Iteration= 19; root mean square error= 0.5442342E-03 Iteration= 20; root mean square error= 0.5368156E-03 Iteration= 21; root mean square error= 0.5295050E-03 Iteration= 22; root mean square error= 0.5223005E-03 Iteration= 23; root mean square error= 0.5152003E-03 Iteration= 24; root mean square error= 0.5082026E-03 Iteration= 25; root mean square error= 0.5013055E-03 Min. area AFTER smoothing= 0.6829629E-01 Max. area AFTER smoothing= 0.3241680E+00 recon 0 RECON2D reconnection loop2d: 1 RECON: done. filter/1,0,0 FILTER:Use internal epsilonl value = 0.783989179046E-11 FILTER:Dudding 80 duplicate points. rmpoint/compress 80 points removed and 0 elements removed. The new point count is 1241. The new element count is 2368. # Flatten input elevations and interpolate to poly shape read/avs/lidar.inp/mo_lidar cmo/addatt/mo_lidar/elev/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_lidar/z_save/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_lidar 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 3 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_merge number of nodes = 1241 number of elements = 2368 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_lidar number of nodes = 757764 number of elements = 1512048 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 27000000 status = active finish #read / poly40_topo.inp / mo_lidar cmo/copyatt/mo_lidar/mo_lidar/z_val/zic CMO_COPYATT WARNING: attribute does not exist: attribute now created: z_val cmo/addatt/mo_lidar/z_val/VDOUBLE/scalar/nnodes/linear/permanent/l finish 757764 copied from mo_lidar zic to -> mo_lidar z_val cmo/setatt/mo_lidar/zic/1,0,0/0. 757764 values reset for attribute zic cmo/addatt/mo_merge/z_val/vdouble/scalar/nnodes intrp/continuous/mo_merge z_val/1,0,0/mo_lidar z_val/linear nodes in indexed point set = 1241 INTRP METHOD: continuous FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.677000000000E+01 cmo select mo_lidar finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 26 26 26 2 % 51 51 51 4 % 76 76 76 6 % 101 101 101 8 % 126 126 126 10 % 151 151 151 12 % 176 176 176 14 % 201 201 201 16 % 226 226 226 18 % 251 251 251 20 % 276 276 276 22 % 301 301 301 24 % 326 326 326 26 % 351 351 351 28 % 376 376 376 30 % 401 401 401 32 % 426 426 426 34 % 451 451 451 36 % 476 476 476 38 % 501 501 501 40 % 526 526 526 42 % 551 551 551 44 % 576 576 576 46 % 601 601 601 48 % 626 626 626 50 % 651 651 651 52 % 676 676 676 54 % 701 701 701 56 % 726 726 726 58 % 751 751 751 60 % 776 776 776 62 % 801 801 801 64 % 826 826 826 66 % 851 851 851 68 % 876 876 876 70 % 901 901 901 72 % 926 926 926 74 % 951 951 951 76 % 976 976 976 78 % 1001 1001 1001 80 % 1026 1026 1026 82 % 1051 1051 1051 84 % 1076 1076 1076 86 % 1101 1101 1101 88 % 1126 1126 1126 90 % 1151 1151 1151 92 % 1176 1176 1176 94 % 1201 1201 1201 96 % 1226 1226 1226 98 % 1241 1241 1241 Total cmo select mo_merge finish intrp/continuous done. cmo kdtree release cmo/DELATT/mo_lidar/sbox finish cmo/DELATT/mo_lidar/v12 finish cmo/DELATT/mo_lidar/linkt finish cmo/DELATT/mo_lidar/v2 finish finish cmo/copyatt/mo_merge/mo_merge/zic/z_val 1241 copied from mo_merge z_val to -> mo_merge zic dump/tmp_poly_massage.inp/mo_merge dump/avs/tmp_poly_massage.inp/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish finish cmo/printatt/mo_merge/zic/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 5.024107000E+00 5.434446542E+00 4.103395421E-01 1241 # REFINE - Depends on Parameter for horizontal spacing (edge lengths) cmo/copy/mo_poly_tri/mo_merge cmo/select/mo_poly_tri cmo/setatt/mo_poly_tri/imt/1 1241 values reset for attribute imt1 cmo/setatt/mo_poly_tri/itetclr/1 2368 values reset for attribute itetclr cmo/setatt/mo_poly_tri/itp/0 1241 values reset for attribute itp1 resetpts/itp geniee finish # each call to refine2d will split edges into smaller triangles refine2d Edge iteration refine2db: 0 0 Edge-refined tris: before= 2368 after= 9472 refine2d Edge iteration refine2db: 0 0 Edge-refined tris: before= 9472 after= 37888 #refine2d dump/tmp_poly_refine.inp/mo_poly_tri dump/avs/tmp_poly_refine.inp/mo_poly_tri cmo/modatt/-def-/-def-/ioflag/x finish finish resetpts itp geniee finish cmo delete mo_poly_tri Released Mesh Object: mo_poly_tri # Extract the edge lines around the polygon read/avs/tmp_poly_refine.inp/mo_poly_tri cmo/addatt/mo_poly_tri/z_val/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_poly_tri 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 3 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_merge number of nodes = 1241 number of elements = 2368 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_lidar number of nodes = 757764 number of elements = 1512048 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 27000000 status = inactive 5 Mesh Object name: mo_poly_tri number of nodes = 19169 number of elements = 37888 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish extract/surfmesh/1,0,0/mo_line_work/mo_poly_tri cmo/addatt/mo_line_work/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_line_work/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_line_work/z_val/VDOUBLE/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_line_work/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_line_work/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_line_work/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/status/brief The current-mesh-object(CMO) is: mo_line_work 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 3 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_merge number of nodes = 1241 number of elements = 2368 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_lidar number of nodes = 757764 number of elements = 1512048 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 27000000 status = inactive 5 Mesh Object name: mo_poly_tri number of nodes = 19169 number of elements = 37888 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 6 Mesh Object name: mo_line_work number of nodes = 448 number of elements = 448 dimensions geometry = 3 element type = lin dimensions topology = 1 2 nodes 2 faces 1 edges boundary flag = 16000000 status = active dump/tmp_line.inp/mo_line_work dump/avs/tmp_line.inp/mo_line_work cmo/modatt/-def-/-def-/ioflag/x finish finish # Create distance attibute from outer polygon edge compute/distance_field/mo_merge/mo_line_work/dfield cmo/addatt/mo_merge/temp_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_merge/xobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_merge/yobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_merge/zobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_merge/dfield/VDOUBLE/scalar/nnodes/linear/permanent//-1.0 finish interpolate/voronoi/mo_merge/xobj_tmp_var/1 0 0/mo_line_work/xic/keepatt nodes in indexed point set = 1241 cmo/addatt/mo_merge/pt_gtg/VINT/scalar/nnodes//permanent/agfx/0 finish INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.128510400000E+03 pt_gtg attribute will be added and kept. Sink point Points searched Points Found Percent Done 311 311 311 25 % 621 621 621 50 % 931 931 931 75 % 1241 1241 1241 Total cmo select mo_merge finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_merge/yobj_tmp_var/1 0 0/mo_line_work/yic/keepatt nodes in indexed point set = 1241 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.110696600000E+03 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 311 311 311 25 % 621 621 621 50 % 931 931 931 75 % 1241 1241 1241 Total cmo select mo_merge finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_merge/zobj_tmp_var/1 0 0/mo_line_work/zic nodes in indexed point set = 1241 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.627656800002E+01 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 311 311 311 25 % 621 621 621 50 % 931 931 931 75 % 1241 1241 1241 Total cmo DELATT mo_merge/pt_gtg finish cmo select mo_merge finish intrp/voronoi done. cmo kdtree release finish finish math/sub/mo_merge/temp_tmp_var/1,0,0/mo_merge/xic/mo_merge/xobj_tmp_var finish math/power/mo_merge/dfield/1,0,0/mo_merge/temp_tmp_var/2.0 finish math/sub/mo_merge/temp_tmp_var/1,0,0/mo_merge/yic/mo_merge/yobj_tmp_var finish math/power/mo_merge/temp_tmp_var/1,0,0/mo_merge/temp_tmp_var/2.0 finish math/add/mo_merge/dfield/1 0 0/mo_merge/dfield/mo_merge/temp_tmp_var finish math/sub/mo_merge/temp_tmp_var/1,0,0/mo_merge/zic/mo_merge/zobj_tmp_var finish math/power/mo_merge/temp_tmp_var/1,0,0/mo_merge/temp_tmp_var/2.0 finish math/add/mo_merge/dfield/1 0 0/mo_merge/dfield/mo_merge/temp_tmp_var finish math/power/mo_merge/dfield/1,0,0/mo_merge/dfield/0.5 finish cmo/delatt/mo_merge/temp_tmp_var finish cmo/delatt/mo_merge/xobj_tmp_var finish cmo/delatt/mo_merge/yobj_tmp_var finish cmo/delatt/mo_merge/zobj_tmp_var finish COMPUTE distance_field: Done. cmo printatt mo_merge dfield minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH dfield 0.000000000E+00 1.000440884E+01 1.000440884E+01 1241 dump/tmp_poly_refine.inp/mo_merge dump/avs/tmp_poly_refine.inp/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish finish # Sizes for ice wedge used in math routines to define shape define/HALF_WIDTH/1.4 define/DEPTH/2.8 define/SLOPE/2.0 define/L1/0.02 define/L2/0.24 define/L3/0.1 define/L4/0.05 # Create top and bottom layer of ice wedge mesh object # top of ice wedge is translated to requested layer # to put top under a specified layer # These distances are same as defined for full mesh define/L1/0.02 # this is all material 2 define/L2/0.24 # this is all material 3 define/L3/0.24 # this is all material 4 define/L4/0.5 # this is all material 5 define/L5/5 # subtract each previous layer until ice top is positioned correctly # CHECK Starting elevation is same as top elevation cmo printatt mo_merge zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 5.024107000E+00 5.434446542E+00 4.103395421E-01 1241 math/sub/mo_merge/zic/1,0,0/mo_merge/zic/L1 #dump / avs / tmp_poly40_1.inp / mo_merge math/sub/mo_merge/zic/1,0,0/mo_merge/zic/L2 #dump / avs / tmp_poly40_2.inp / mo_merge math/sub/mo_merge/zic/1,0,0/mo_merge/zic/L3 #dump / avs / tmp_poly40_3.inp / mo_merge #math / sub / mo_merge / zic / 1,0,0 / mo_merge / zic / L4 #math / sub / mo_merge / zic / 1,0,0 / mo_merge / zic / L5 #dump / avs / tmp_poly40_4.inp / mo_merge # top file for stack routine dump/avs/tmp_top.inp/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_top.gmv/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish # CHECK top elevation should be located at intended layer cmo printatt mo_merge zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 4.524107000E+00 4.934446542E+00 4.103395421E-01 1241 # math routines to pinchout ice wedge at the bottom cmo/addatt/mo_merge/z_ele/vdouble/scalar/nnodes cmo/copyatt/mo_merge/mo_merge/z_save/zic CMO_COPYATT WARNING: attribute does not exist: attribute now created: z_save cmo/addatt/mo_merge/z_save/VDOUBLE/scalar/nnodes/linear/permanent/l finish 1241 copied from mo_merge zic to -> mo_merge z_save cmo/printatt/mo_merge/zic/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 4.524107000E+00 4.934446542E+00 4.103395421E-01 1241 cmo/addatt/mo_merge/depth/vdouble/scalar/nnodes cmo/setatt/mo_merge/depth/1,0,0/DEPTH 1241 values reset for attribute depth cmo/printatt/mo_merge/imt/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH imt1 1 2 1 1241 #eltset / e2 / itetclr / eq / 2 #pset / p2 / eltset / e2 #cmo / setatt / mo_merge / imt / pset get p2 / 2 pset/pdown/attribute/dfield/1,0,0/lt/HALF_WIDTH THE PSET pdown HAS 360 POINTS #pset / pdown / attribute / imt / 1,0,0 / eq / 1 #math / divide / mo_merge / slope / pset get pdown / mo_merge / depth / mo_merge math/multiply/mo_merge/z_ele/pset get pdown/mo_merge/dfield/SLOPE math/sub/mo_merge/z_ele/pset get pdown/mo_merge/z_ele/DEPTH math/add/mo_merge/z_ele/1,0,0/mo_merge/z_ele/mo_merge/z_save #math / ceiling / mo_merge / z_save / 1,0,0 / mo_merge / z_save / 0. cmo/printatt/mo_merge/z_ele/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH z_ele 1.724107000E+00 4.934446542E+00 3.210339542E+00 1241 cmo/copyatt/mo_merge/mo_merge/zic/z_ele 1241 copied from mo_merge z_ele to -> mo_merge zic # bottom layer for stack routine dump/avs/tmp_bot.inp/mo_merge cmo/modatt/-def-/-def-/ioflag/x finish # CHECK bottom elevation should be DEPTH below top layer cmo printatt mo_merge zic minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH zic 1.724107000E+00 4.934446542E+00 3.210339542E+00 1241 # stack top and bottom into a prism mesh ice wedge object cmo/create/mo_stack stack/layers/avs/tmp_bot.inp 1 tmp_top.inp 1/flip Layers to create: 2 Max material number: 1 Reading 2 surface files... cmo/addatt/mo_stack/layertyp/VINT/scalar/nnodes//permanent/agfx finish Read first surface: tmp_bot.inp read/avs/tmp_bot.inp/def1 cmo/addatt/def1/z_val/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/dfield/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/z_ele/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def1/depth/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def1 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 3 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_merge number of nodes = 1241 number of elements = 2368 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_lidar number of nodes = 757764 number of elements = 1512048 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 27000000 status = inactive 5 Mesh Object name: mo_poly_tri number of nodes = 19169 number of elements = 37888 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 6 Mesh Object name: mo_line_work number of nodes = 448 number of elements = 448 dimensions geometry = 3 element type = lin dimensions topology = 1 2 nodes 2 faces 1 edges boundary flag = 16000000 status = inactive 7 Mesh Object name: mo_stack number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = inactive 8 Mesh Object name: def1 number of nodes = 1241 number of elements = 2368 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish 2368 of 2368 downward elements flipped up Read surface: tmp_top.inp read/avs/tmp_top.inp/def2 cmo/addatt/def2/z_val/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/def2/dfield/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: def2 1 Mesh Object name: mo number of nodes = 10 number of elements = 10 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_inner number of nodes = 5 number of elements = 3 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_merge number of nodes = 1241 number of elements = 2368 dimensions geometry = 2 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 4 Mesh Object name: mo_lidar number of nodes = 757764 number of elements = 1512048 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 27000000 status = inactive 5 Mesh Object name: mo_poly_tri number of nodes = 19169 number of elements = 37888 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 6 Mesh Object name: mo_line_work number of nodes = 448 number of elements = 448 dimensions geometry = 3 element type = lin dimensions topology = 1 2 nodes 2 faces 1 edges boundary flag = 16000000 status = inactive 7 Mesh Object name: mo_stack number of nodes = 0 number of elements = 0 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 8 Mesh Object name: def1 number of nodes = 1241 number of elements = 2368 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 9 Mesh Object name: cmoprev number of nodes = 1241 number of elements = 2368 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = inactive 10 Mesh Object name: def2 number of nodes = 1241 number of elements = 2368 dimensions geometry = 3 element type = tri dimensions topology = 2 3 nodes 3 faces 3 edges boundary flag = 16000000 status = active finish finish cmo/delete/def2/ Released Mesh Object: def2 finish 2368 of 2368 downward elements flipped up Total equal elevations: 881 of 1241 Layers compared: tmp_bot.inp and tmp_top.inp cmo/delete/cmoprev/ Released Mesh Object: cmoprev finish cmo/copy/cmoprev/cmonxt/ finish addmesh/merge/mo_stack/def1/cmonxt/ searching for mo_stack attributes in cmonxt attribute not found: 66 layertyp ADDMESH: 1 attributes not copied from cmonxt to mo_stack finish warning: Column has 0 height. column, node: 6 1247 Warning: Column has 0 height: 6 warning: Column has 0 height. column, node: 7 1248 Warning: Column has 0 height: 7 warning: Column has 0 height. column, node: 8 1249 Warning: Column has 0 height: 8 warning: Column has 0 height. column, node: 9 1250 Warning: Column has 0 height: 9 warning: Column has 0 height. column, node: 10 1251 Warning: Column has 0 height: 10 warning: Column has 0 height. column, node: 11 1252 Warning: Column has 0 height: 11 warning: Column has 0 height. column, node: 15 1256 Warning: Column has 0 height: 15 warning: Column has 0 height. column, node: 21 1262 Warning: Column has 0 height: 21 warning: Column has 0 height. column, node: 22 1263 Warning: Column has 0 height: 22 warning: Column has 0 height. column, node: 25 1266 Total warnings for flat columns: 1762 ................................................................ surface name layer color type llcorner zic tmp_bot.inp 1 1 -1 1) 1.827724E+00 tmp_top.inp 2 1 -2 1242) 4.627724E+00 Elements per layer: 2368 stacked total: 4736 Nodes per layer: 1241 stacked total: 2482 No Truncating layer specified. files read: 2 from total: 2 ................................................................ cmo/addatt/mo_stack/nlayers/INT/scalar/scalar/constant// finish cmo/addatt/mo_stack/nnperlayer/INT/scalar/scalar/constant// finish cmo/addatt/mo_stack/neperlayer/INT/scalar/scalar/constant// finish cmo/setatt/mo_stack/nlayers 2 1 values reset for attribute nlayers finish cmo/setatt/mo_stack/nnperlayer 1241 1 values reset for attribute nnperlayer finish cmo/setatt/mo_stack/neperlayer 2368 1 values reset for attribute neperlayer finish Released Mesh Object: def1 Released Mesh Object: cmonxt Released Mesh Object: cmoprev stack done. stack/fill/mo_prism/mo_stack cmo/copy/mo_prism/mo_stack/ finish geniee finish filter/1,0,0 FILTER:Use internal epsilonl value = 0.999999993923E-08 FILTER:Dudding 881 duplicate points. rmpoint/compress 881 points removed and 0 elements removed. The new point count is 1601. The new element count is 2368. rmpoint/zero_volume/1.e-12 Dudded 0 points plus parents, plus 1680 elements removed. # Final output file to be used later dump/gmv/tmp_ice_wedge.gmv/mo_prism cmo/modatt/-def-/-def-/ioflag/x finish dump/avs/tmp_ice_wedge.inp/mo_prism cmo/modatt/-def-/-def-/ioflag/x finish ############# CHECK FINAL WORK ##################### # write surface triangulation sizes cmo select mo_poly_tri quality epsilonl, epsilonaspect: 7.8404212E-12 4.8196798E-34 -------------------------------------------- elements with aspect ratio < .01: 0 elements with aspect ratio b/w .01 and .02: 0 elements with aspect ratio b/w .02 and .05: 0 elements with aspect ratio b/w .05 and .1 : 0 elements with aspect ratio b/w .1 and .2 : 0 elements with aspect ratio b/w .2 and .5 : 48 elements with aspect ratio b/w .5 and 1. : 37840 min aspect ratio = 0.4242E+00 max aspect ratio = 0.1000E+01 epsilonvol: 5.6781991E-11 --------------------------------------- element volumes b/w 0.4273E-02 and 0.5835E-02: 832 element volumes b/w 0.5835E-02 and 0.7969E-02: 6704 element volumes b/w 0.7969E-02 and 0.1088E-01: 16336 element volumes b/w 0.1088E-01 and 0.1486E-01: 8640 element volumes b/w 0.1486E-01 and 0.2030E-01: 5376 min volume = 4.2726277E-03 max volume = 2.0301579E-02 ----------------------------------------------------------- 37888 total elements evaluated. quality/edge_min epsilonl, epsilonaspect: 7.8404212E-12 4.8196798E-34 -------------------------------------------- element norm min edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 4544 element norm edge length b/w .5 and 1. : 33344 min min edge length = 0.7620E-01 max min edge length = 0.2048E+00 ----------------------------------------------------------- 37888 total elements evaluated. quality/edge_max epsilonl, epsilonaspect: 7.8404212E-12 4.8196798E-34 -------------------------------------------- element norm max edge length < .01: 0 element norm edge length b/w .01 and .02: 0 element norm edge length b/w .02 and .05: 0 element norm edge length b/w .05 and .1 : 0 element norm edge length b/w .1 and .2 : 0 element norm edge length b/w .2 and .5 : 336 element norm edge length b/w .5 and 1. : 37552 min max edge length = 0.1181E+00 max max edge length = 0.2596E+00 ----------------------------------------------------------- 37888 total elements evaluated. # coordinates for polygon surface (top elevations) cmo printatt mo_poly_tri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 19169 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 19169 zic 5.024107000E+00 5.434446542E+00 4.103395421E-01 19169 # coordinates for stacked ice mesh object cmo printatt mo_prism -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 1601 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 1601 zic 1.724107000E+00 4.792780936E+00 3.068673936E+00 1601 # there should be one material for ice mesh object cmo printatt mo_prism imt minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH imt1 1 1 0 1601 cmo printatt mo_prism itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 1 0 688 ################################################## # DONE # file tmp_poly40_refine.inp surface for full mesh layers # file tmp_ice_wedge.gmv 3D ice wedge mesh for interpolation finish LaGriT successfully completed