* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.200 Linux m64 * * * date_compile: 2016/10/25 Ubu gf * * * Run Time: 2016/Nov 18 09:05:50 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LA-CC-15-069 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # read the file with the 3D polygon mesh # this is a triangle mesh stacked into prism elements # such that tri faces show top and bottom, quads on sides # itetclr materials have been defined, facesets have not read/proto_full_poly.inp/mo_pri read/avs/proto_full_poly.inp/mo_pri cmo/addatt/mo_pri/layertyp/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/node_ice/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/mat_orig/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ikey_utr/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 413043 number of elements = 798720 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active finish finish cmo status mo_pri The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 413043 number of elements = 798720 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo agl 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 4.130E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 7.987E+05 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 1.367E-11 35 epsilona REAL scalar scalar const perma l 8.419E-10 36 epsilonv REAL scalar scalar const perma l 6.981E-09 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 4.130E+05 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.023E+02 52 ymin REAL scalar scalar const perma l 8.497E+01 53 zmin REAL scalar scalar const perma l -4.500E+01 54 xmax REAL scalar scalar const perma l 1.275E+02 55 ymax REAL scalar scalar const perma l 1.097E+02 56 zmax REAL scalar scalar const perma l 5.449E+00 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VINT scalar nnodes linea perma gxa 0.000E+00 67 node_ice VINT scalar nnodes linea perma gxa 0.000E+00 68 mat_orig VINT scalar nelements linea perma gxa 0.000E+00 69 ikey_utr VINT scalar nelements linea perma gxa 0.000E+00 ## Extract the outside surface of the polygon mesh # The extracted surface will have the element and element face # that were extracted from the 3D mesh elements # attributes, idelem1 and idface1 are written to faceset files # with each file grouped into seperate faceset files #### IMPORTANT ################### # The cells MUST be pre-sorted by itetclr material values # Exodus will reorder elements internally, we do not want the # cells to be re-ordered. If they are, faceset correlation to # the cell numbers will no longer be correct. # Check that facesets are correct by reading the exo file into GMV # and selecting Surfaces under Display. #--------- BEFORE EXTRACT -------------------------------------- # sort based on itetclr values and cell location # secondary sort conventions are up to user # xmed, ymed, zmed will arrange into columns (after itetclr sort) createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo_pri/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo_pri/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey geniee finish dump/gmv/out_tmp_sort1.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo/DELATT/mo_pri/ikey # sort nodes based on mesh convention z, y, then x sort/mo_pri/index/ascending/ikey/zic yic xic cmo/addatt/mo_pri/ikey/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey dump gmv tmp_sort.gmv mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo_pri xmed cmo DELATT mo_pri ymed cmo DELATT mo_pri zmed cmo DELATT mo_pri ikey #---------------------------------------------------------------- extract/surfmesh/1 0 0/mo_surf/mo_pri/external cmo/addatt/mo_surf/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_surf/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/layertyp/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/node_ice/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/printatt/mo_surf/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 26946 scalar 1 1 0 1 vector 3 3 0 1 nnodes 26946 26946 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 33088 33088 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 26946 ialias 0 0 0 26946 imt1 1 1 0 26946 itp1 0 2 2 26946 icr1 0 0 0 26946 isn1 0 0 0 26946 xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 26946 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 26946 zic -4.500000000E+01 5.448649372E+00 5.044864937E+01 26946 xtetwd 0 0 0 33088 itetclr 1 1 0 33088 itettyp 3 4 1 33088 itetoff 0 120060 120060 33088 jtetoff 0 120060 120060 33088 itet 0 26946 26946 33088x* jtet 0 330874 330874 33088x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 26946 26946 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 33088 itetclr1 1 30 29 33088 idnode0 1 413043 413042 26946 idelem0 0 0 0 33088 idelem1 1 798720 798719 33088 facecol 1 6 5 33088 idface0 0 0 0 33088 idface1 1 5 4 33088 layertyp -2 2 4 26946 node_ice 0 1 1 26946 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab ## Set surface elements to direction they face based on normals # These values will be written to itetclr, copy to id_side attribute # 1 = bottom # 2 = top # 3 = east right # 4 = north back # 5 = west left # 6 = south front cmo/addatt/mo_surf/id_side/vint/scalar/nelements cmo/select mo_surf settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 26944 out of 33088 element colors changed. cmo/copyatt/mo_surf mo_surf/id_side itetclr 33088 copied from mo_surf itetclr to -> mo_surf id_side cmo/printatt/mo_surf/id_side/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH id_side 1 6 5 33088 # this was previous convention, use settets convention instead. # so that top is now 2 and 1 is bottom, etc. # the settets convention is more widely used # cmo / setatt / mo_surf / id_side / eltset get etop / 1 # cmo / setatt / mo_surf / id_side / eltset get ebot / 2 # cmo / setatt / mo_surf / id_side / eltset get efro / 3 # cmo / setatt / mo_surf / id_side / eltset get ebac / 4 # cmo / setatt / mo_surf / id_side / eltset get elef / 5 # cmo / setatt / mo_surf / id_side / eltset get erig / 6 define/FILENAME/fs_3_rig.faceset define/SS_ID/3 define/SNAME/SS_east_right infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_east_right HAS 4160 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4160 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28928 ELEMENTS rmpoint/element/eltset get e_delete Dudded 22623 points plus parents, and 28928 elements removed. rmpoint/compress 22623 points removed and 0 elements removed. The new point count is 4323. The new element count is 4160. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_4_bac.faceset define/SS_ID/4 define/SNAME/SS_north_back infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_north_back HAS 8320 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 8320 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 24768 ELEMENTS rmpoint/element/eltset get e_delete Dudded 18431 points plus parents, and 24768 elements removed. rmpoint/compress 18431 points removed and 0 elements removed. The new point count is 8515. The new element count is 8320. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_5_lef.faceset define/SS_ID/5 define/SNAME/SS_west_left infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_west_left HAS 4160 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4160 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28928 ELEMENTS rmpoint/element/eltset get e_delete Dudded 22623 points plus parents, and 28928 elements removed. rmpoint/compress 22623 points removed and 0 elements removed. The new point count is 4323. The new element count is 4160. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_6_fro.faceset define/SS_ID/6 define/SNAME/SS_south_front infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_south_front HAS 4160 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4160 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28928 ELEMENTS rmpoint/element/eltset get e_delete Dudded 22623 points plus parents, and 28928 elements removed. rmpoint/compress 22623 points removed and 0 elements removed. The new point count is 4323. The new element count is 4160. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_1_bot.faceset define/SS_ID/1 define/SNAME/SS_bottom infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_bottom HAS 6144 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 6144 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 26944 ELEMENTS rmpoint/element/eltset get e_delete Dudded 23793 points plus parents, and 26944 elements removed. rmpoint/compress 23793 points removed and 0 elements removed. The new point count is 3153. The new element count is 6144. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_2_top.faceset define/SS_ID/2 define/SNAME/SS_top infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp # report sideset number of faces eltset/SNAME/id_side/eq/SS_ID THE ELTSET SS_top HAS 6144 ELEMENTS eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 6144 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 26944 ELEMENTS rmpoint/element/eltset get e_delete Dudded 23793 points plus parents, and 26944 elements removed. rmpoint/compress 23793 points removed and 0 elements removed. The new point count is 3153. The new element count is 6144. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish #---------------------------------------------------------------- ## CHECK that top number of faces = bottom = layer # this version layer has number of elements = 6272 #---------------------------------------------------------------- ######################## Add Top Corners Section ################ # Find facesets at top corners for Boundary Conditions # Using x,y points of the input polygons (before triangulation) # Points are found on outside surface of full mesh, no internal nodes # Write exodus file to check corner point facesets # fs_7_Csides.faceset and fs_8_Ctop.faceset # (exodus assigns side set id based on file count) define FPOLY_PTS boundary_points.inp infile bc_corner_faceset.mlgi # MUST DEFINE INPUT FILE FPOLY_PTS # output files and SS ID NUMBERS define SS_C_SIDE 7 define SS_NAME_7 SS_CORNER_SIDE define FILE_C_SIDE fs_7_Csides.faceset define SS_C_TOP 8 define SS_NAME_8 SS_CORNER_TOP define FILE_C_TOP fs_8_Ctop.faceset # find and set top corner pts and facesets # use attribute layertyp = -2 from stack command # set top corner point faces (side) = SS_C_SIDE # set top corner point faces (top) = SS_C_TOP read avs FPOLY_PTS mo_cpts cmo/status/brief The current-mesh-object(CMO) is: mo_cpts 1 Mesh Object name: mo_pri number of nodes = 413043 number of elements = 798720 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_surf number of nodes = 26946 number of elements = 33088 dimensions geometry = 3 element type = hyb dimensions topology = 2 10 nodes 10 faces 12 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cpts number of nodes = 5 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish # CHECK input poly points # zic should be 0, or set to 0 here cmo/printatt/mo_cpts/-xyz- minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 5 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 5 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 5 cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp cmo/addatt/mo_tmp/bc_faces/vint/scalar/nelements ########################## # Find the top points 0 distance from poly corner points cmo addatt mo_tmp zicsave VDOUBLE/scalar/nnodes cmo copyatt mo_tmp mo_tmp zicsave zic 26946 copied from mo_tmp zic to -> mo_tmp zicsave cmo setatt mo_tmp zic 0. 26946 values reset for attribute zic compute/distance_field/mo_tmp/mo_cpts/xdist cmo/addatt/mo_tmp/temp_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/yobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/zobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xdist/VDOUBLE/scalar/nnodes/linear/permanent//-1.0 finish interpolate/voronoi/mo_tmp/xobj_tmp_var/1 0 0/mo_cpts/xic/keepatt nodes in indexed point set = 26946 cmo/addatt/mo_tmp/pt_gtg/VINT/scalar/nnodes//permanent/agfx/0 finish INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.128510400000E+03 pt_gtg attribute will be added and kept. Sink point Points searched Points Found Percent Done 1348 1352 1348 5 % 2695 2701 2695 10 % 4042 4079 4042 15 % 5389 5462 5389 20 % 6736 6854 6736 25 % 8083 8213 8083 30 % 9430 9622 9430 35 % 10777 11031 10777 40 % 12124 12378 12124 45 % 13471 13725 13471 50 % 14818 15134 14818 55 % 16165 16481 16165 60 % 17512 17890 17512 65 % 18859 19299 18859 70 % 20206 20646 20206 75 % 21553 22036 21553 80 % 22900 23426 22900 85 % 24247 24816 24247 90 % 25594 26206 25594 95 % 26941 27596 26941 100 % 26946 27601 26946 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/yobj_tmp_var/1 0 0/mo_cpts/yic/keepatt nodes in indexed point set = 26946 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.110696600000E+03 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1348 1348 1348 5 % 2695 2695 2695 10 % 4042 4042 4042 15 % 5389 5389 5389 20 % 6736 6736 6736 25 % 8083 8083 8083 30 % 9430 9430 9430 35 % 10777 10777 10777 40 % 12124 12124 12124 45 % 13471 13471 13471 50 % 14818 14818 14818 55 % 16165 16165 16165 60 % 17512 17512 17512 65 % 18859 18859 18859 70 % 20206 20206 20206 75 % 21553 21553 21553 80 % 22900 22900 22900 85 % 24247 24247 24247 90 % 25594 25594 25594 95 % 26941 26941 26941 100 % 26946 26946 26946 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/zobj_tmp_var/1 0 0/mo_cpts/zic nodes in indexed point set = 26946 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.100000000000E+01 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1348 1348 1348 5 % 2695 2695 2695 10 % 4042 4042 4042 15 % 5389 5389 5389 20 % 6736 6736 6736 25 % 8083 8083 8083 30 % 9430 9430 9430 35 % 10777 10777 10777 40 % 12124 12124 12124 45 % 13471 13471 13471 50 % 14818 14818 14818 55 % 16165 16165 16165 60 % 17512 17512 17512 65 % 18859 18859 18859 70 % 20206 20206 20206 75 % 21553 21553 21553 80 % 22900 22900 22900 85 % 24247 24247 24247 90 % 25594 25594 25594 95 % 26941 26941 26941 100 % 26946 26946 26946 Total cmo DELATT mo_tmp/pt_gtg finish cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/xic/mo_tmp/xobj_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/yic/mo_tmp/yobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/zic/mo_tmp/zobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/xdist/0.5 finish cmo/delatt/mo_tmp/temp_tmp_var finish cmo/delatt/mo_tmp/xobj_tmp_var finish cmo/delatt/mo_tmp/yobj_tmp_var finish cmo/delatt/mo_tmp/zobj_tmp_var finish COMPUTE distance_field: Done. cmo copyatt/mo_tmp mo_tmp/zic zicsave 26946 copied from mo_tmp zicsave to -> mo_tmp zic dump gmv tmp.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish pset/ptop attribute layertyp/1,0,0/eq -2 THE PSET ptop HAS 3153 POINTS pset p10 attribute xdist/pset,get,ptop lt .001 THE PSET p10 HAS 5 POINTS cmo setatt mo_tmp layertyp pset,get,p10 SS_C_SIDE 5 values reset for attribute layertyp eltset/e_tc/inclusive pset,get,p10 THE ELTSET e_tc HAS 21 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc SS_C_SIDE 21 values reset for attribute bc_faces eltset/e_top/id_side/eq 2 THE ELTSET e_top HAS 6144 ELEMENTS eltset e_tc_top inter e_top e_tc THE ELTSET e_tc_top HAS 11 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc_top SS_C_TOP 11 values reset for attribute bc_faces dump gmv tmp_bc_sides.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_SIDE cmo copy mo_tmp2 mo_tmp cmo select mo_tmp2 # report element count eltset/SS_NAME_7/bc_faces/eq/SS_C_SIDE THE ELTSET SS_CORNER_SIDE HAS 10 ELEMENTS eltset/e_keep/bc_faces/eq/SS_C_SIDE THE ELTSET e_keep HAS 10 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 33078 ELEMENTS rmpoint/element/eltset get e_delete Dudded 26916 points plus parents, and 33078 elements removed. rmpoint/compress 26916 points removed and 0 elements removed. The new point count is 30. The new element count is 10. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp2/itetclr0 cmo/DELATT/mo_tmp2/idnode0 cmo/DELATT/mo_tmp2/idelem0 cmo/DELATT/mo_tmp2/facecol cmo/DELATT/mo_tmp2/itetclr1 cmo/DELATT/mo_tmp2/idface0 cmo/DELATT/mo_tmp2/id_side cmo/DELATT/mo_tmp2/layertyp cmo/DELATT/mo_tmp2/bc_faces dump/avs2/FILE_C_SIDE/mo_tmp2/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_TOP cmo select mo_tmp # report element count eltset/SS_NAME_8/bc_faces/eq/SS_C_TOP THE ELTSET SS_CORNER_TOP HAS 11 ELEMENTS eltset/e_keep/bc_faces/eq/SS_C_TOP THE ELTSET e_keep HAS 11 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 33077 ELEMENTS rmpoint/element/eltset get e_delete Dudded 26925 points plus parents, and 33077 elements removed. rmpoint/compress 26925 points removed and 0 elements removed. The new point count is 21. The new element count is 11. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp cmo/DELATT/mo_tmp/bc_faces dump/avs2/FILE_C_TOP/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish # clean up cmo/delete/mo_tmp Released Mesh Object: mo_tmp cmo/delete/mo_tmp2 Released Mesh Object: mo_tmp2 finish dump/exo/mesh_bc.exo/mo_pri///facesets fs_7_Csides.faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_bc.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 413043 number of elements: 798720 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 2 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to ExodusII file: mesh_bc.exo using cmo: mo_pri ############################ # write some informational files and output dump/gmv/surf_sides.gmv/mo_surf cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_surf -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 26946 scalar 1 1 0 1 vector 3 3 0 1 nnodes 26946 26946 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 33088 33088 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 26946 ialias 0 0 0 26946 imt1 1 1 0 26946 itp1 0 2 2 26946 icr1 0 0 0 26946 isn1 0 0 0 26946 xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 26946 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 26946 zic -4.500000000E+01 5.448649372E+00 5.044864937E+01 26946 xtetwd 0 0 0 33088 itetclr 1 6 5 33088 itettyp 3 4 1 33088 itetoff 0 120060 120060 33088 jtetoff 0 120060 120060 33088 itet 0 26946 26946 33088x* jtet 0 330874 330874 33088x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 26946 26946 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 33088 itetclr1 1 30 29 33088 idnode0 1 413043 413042 26946 idelem0 0 0 0 33088 idelem1 1 798720 798719 33088 facecol 1 6 5 33088 idface0 0 0 0 33088 idface1 1 5 4 33088 layertyp -2 2 4 26946 node_ice 0 1 1 26946 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab id_side 1 6 5 33088 cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 413043 scalar 1 1 0 1 vector 3 3 0 1 nnodes 413043 413043 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 798720 798720 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 413043 ialias 0 0 0 413043 imt1 1 6 5 413043 itp1 0 10 10 413043 icr1 0 0 0 413043 isn1 0 0 0 413043 xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 413043 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 413043 zic -4.500000000E+01 5.448649372E+00 5.044864937E+01 413043 xtetwd 0 0 0 798720 itetclr 1 30 29 798720 itettyp 7 7 0 798720 itetoff 0 4792314 4792314 798720 jtetoff 0 3993595 3993595 798720 itet 1 413043 413042 798720x6 jtet 3 19993597 19993594 798720x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 1.367279621E-11 1.367279621E-11 0.000000000E+00 1 epsilona 8.419270360E-10 8.419270360E-10 0.000000000E+00 1 epsilonv 6.980986437E-09 6.980986437E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 413043 413043 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.023017000E+02 1.023017000E+02 0.000000000E+00 1 ymin 8.497500000E+01 8.497500000E+01 0.000000000E+00 1 zmin -4.500000000E+01 -4.500000000E+01 0.000000000E+00 1 xmax 1.275104000E+02 1.275104000E+02 0.000000000E+00 1 ymax 1.096966000E+02 1.096966000E+02 0.000000000E+00 1 zmax 5.448649372E+00 5.448649372E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2 2 4 413043 node_ice 0 1 1 413043 mat_orig 1 6 5 798720 ikey_utr 1 798720 798719 798720 cmo printatt mo_pri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.023017000E+02 1.275104000E+02 2.520870000E+01 413043 yic 8.497500000E+01 1.096966000E+02 2.472160000E+01 413043 zic -4.500000000E+01 5.448649372E+00 5.044864937E+01 413043 cmo select mo_pri quality volume itetclr QUALITY TOTALS for 7 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 6144 ELEMENTS finish epsilonvol: 6.9809864E-09 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... element volumes b/w 0.7542E-03 and 0.9377E-03: 154 element volumes b/w 0.9377E-03 and 0.1166E-02: 1791 element volumes b/w 0.1166E-02 and 0.1450E-02: 2689 element volumes b/w 0.1450E-02 and 0.1802E-02: 1434 element volumes b/w 0.1802E-02 and 0.2241E-02: 76 min volume = 7.5415761E-04 max volume = 2.2410292E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 55296 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... element volumes b/w 0.7542E-03 and 0.9377E-03: 1386 element volumes b/w 0.9377E-03 and 0.1166E-02: 16119 element volumes b/w 0.1166E-02 and 0.1450E-02: 24201 element volumes b/w 0.1450E-02 and 0.1802E-02: 12906 element volumes b/w 0.1802E-02 and 0.2241E-02: 684 min volume = 7.5415753E-04 max volume = 2.2410310E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/3/ THE ELTSET -etmp- HAS 55296 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 3 ........................... element volumes b/w 0.7542E-03 and 0.9377E-03: 1386 element volumes b/w 0.9377E-03 and 0.1166E-02: 16119 element volumes b/w 0.1166E-02 and 0.1450E-02: 24201 element volumes b/w 0.1450E-02 and 0.1802E-02: 12906 element volumes b/w 0.1802E-02 and 0.2241E-02: 684 min volume = 7.5415753E-04 max volume = 2.2410310E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/4/ THE ELTSET -etmp- HAS 36864 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 4 ........................... element volumes b/w 0.7542E-03 and 0.9377E-03: 924 element volumes b/w 0.9377E-03 and 0.1166E-02: 10746 element volumes b/w 0.1166E-02 and 0.1450E-02: 16134 element volumes b/w 0.1450E-02 and 0.1802E-02: 8604 element volumes b/w 0.1802E-02 and 0.2241E-02: 456 min volume = 7.5415730E-04 max volume = 2.2410297E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/5/ THE ELTSET -etmp- HAS 91232 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 5 ........................... element volumes b/w 0.9427E-03 and 0.1172E-02: 2360 element volumes b/w 0.1172E-02 and 0.1457E-02: 26095 element volumes b/w 0.1457E-02 and 0.1812E-02: 42231 element volumes b/w 0.1812E-02 and 0.2253E-02: 19666 element volumes b/w 0.2253E-02 and 0.2801E-02: 880 min volume = 9.4269701E-04 max volume = 2.8012865E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/6/ THE ELTSET -etmp- HAS 502366 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 6 ........................... element volumes b/w 0.3771E-02 and 0.8554E-02: 279515 element volumes b/w 0.8554E-02 and 0.1941E-01: 10461 element volumes b/w 0.1941E-01 and 0.4403E-01: 59250 element volumes b/w 0.4403E-01 and 0.9988E-01: 66060 element volumes b/w 0.9988E-01 and 0.2266E+00: 87080 min volume = 3.7707861E-03 max volume = 2.2657668E-01 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/30/ THE ELTSET -etmp- HAS 51522 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 30 ........................... element volumes b/w 0.1017E-02 and 0.1620E-02: 16660 element volumes b/w 0.1620E-02 and 0.2581E-02: 14968 element volumes b/w 0.2581E-02 and 0.4112E-02: 52 element volumes b/w 0.4112E-02 and 0.6551E-02: 10186 element volumes b/w 0.6551E-02 and 0.1044E-01: 9656 min volume = 1.0168143E-03 max volume = 1.0437501E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for mo_pri 1 7 ........................................................... Color Num. Elements Volume Fractional Volume 1 6144 0.7944030E+01 0.000397732 2 55296 0.7149627E+02 0.003579592 3 55296 0.7149627E+02 0.003579592 4 36864 0.4766418E+02 0.002386394 5 91232 0.1465814E+03 0.007338864 6 502366 0.1944314E+05 0.973456236 30 51522 0.1849845E+03 0.009261589 Total elements: 798720 Total Volume: 0.1997330E+05 ----------------------------------------------------------- 798720 total elements evaluated. ############################ # write final mesh with multi material and all facesets # node imt does not seem to be included in exo files dump/exo/mesh_fsets.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3 _rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset fs_7_Csides.face set fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_fsets.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 413043 number of elements: 798720 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 8 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to ExodusII file: mesh_fsets.exo using cmo: mo_pri dump/avs2/mesh_fsets.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish # DONE with multi-material with ice finish LaGriT successfully completed