* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Jun 7 07:29:50 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # Interpolate ice wedge mesh on to full stacked mesh # This will overwrite material layers with ice 30 # Input the ice wedge mesh object read/gmv/tmp_ice_wedge.gmv/mo_ice Reading GMV binary file gmvinputieee cmo/addatt/mo_ice/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee geniee: mesh has 484 self-degenerate faces ELMTESTD WARNING: mesh has 0 degenerate elements and 534 self-degenerate elements finish Nodes: 1809 Elements: 804 Done reading GMV binary total bytes: 180840 file: tmp_ice_wedge.gmv cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 1809 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 1809 zic 1.204300165E+00 4.342238426E+00 3.137938261E+00 1809 cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 1 0 804 cmo/setatt/mo_ice/itetclr/30 804 values reset for attribute itetclr cmo/copyatt/mo_ice/mo_ice/mat_orig/itetclr CMO_COPYATT WARNING: attribute does not exist: attribute now created: mat_orig cmo/addatt/mo_ice/mat_orig/VINT/scalar/nelements/user/permanent/l finish 804 copied from mo_ice itetclr to -> mo_ice mat_orig # Input the full stacked mesh read/gmv/full_mesh.gmv/mo Reading GMV binary file gmvinputieee cmo/addatt/mo/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee finish Nodes: 311273 Elements: 602112 Done reading GMV binary total bytes: 39376408 file: full_mesh.gmv cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 311273 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 311273 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 311273 cmo/addatt/mo/ielemclr/VINT/scalar/nnodes cmo/addatt/mo/mat_orig/VINT/scalar/nelements cmo/copyatt/mo/mo/mat_orig/itetclr 602112 copied from mo itetclr to -> mo mat_orig # Interpolate ice wedge mesh on to full mesh node attribute ielemclr # Save itetclr to mat_orig before overwriting cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 6 5 602112 intrp/map/mo ielemclr/1,0,0/mo_ice itetclr nodes in indexed point set = 311273 INTRP METHOD: map FUNCTION: user TIEBREAKER: maxtie FLAG: plus1 0.310000000000E+02 cmo select mo_ice finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 15565 0 0 5 % 31129 0 0 10 % 46693 0 0 15 % 62257 0 0 20 % 77821 0 0 25 % 93385 1435 556 30 % 108949 3333 1489 35 % 124513 5902 3026 40 % 140077 9161 5207 45 % 155641 12962 7866 50 % 171205 17501 11028 55 % 186769 22312 14349 60 % 202333 27378 17808 65 % 217897 32611 21420 70 % 233461 36017 23679 75 % 249025 36017 23679 80 % 264589 36017 23679 85 % 280153 36017 23679 90 % 295717 36017 23679 95 % 311273 36017 23679 Total cmo select mo finish WARNING: Sink points not inside source grid: 287594 Total sink points marked: 287594 with flag: 31.00 intrp/map done. cmo kdtree release cmo/DELATT/mo_ice/sbox finish cmo/DELATT/mo_ice/v12 finish cmo/DELATT/mo_ice/linkt finish cmo/DELATT/mo_ice/v2 finish finish # CHECK nodes should be values 30 and 31 (outside ice) cmo/printatt/mo/ielemclr/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH ielemclr 30 31 1 311273 # Find nodes set with ice value 30 cmo/select/mo pset/p_ice/attribute/ielemclr/1,0,0/eq/30 THE PSET p_ice HAS 23679 POINTS # Find elements with nodes set to ice # note inclusion or exclusion options select more or less eltset/e_ice/inclusive/pset get p_ice THE ELTSET e_ice HAS 51386 ELEMENTS #eltset / e_ice / exclusive / pset get p_ice # Find elements in layers where ice exists # Note Material order 1 at top to bottom n define MAX_ICELAYER 4 eltset e_all itetclr ge 1 THE ELTSET e_all HAS 602112 ELEMENTS eltset/e_maxl/itetclr/gt/MAX_ICELAYER THE ELTSET e_maxl HAS 439040 ELEMENTS # CHECK bounds of ice over all materials eltset e_all_e30 inter e_ice e_all THE ELTSET e_all_e30 HAS 51386 ELEMENTS # Find elements of ice in permitted layers only eltset/e30/inter/e_ice e_maxl THE ELTSET e30 HAS 49900 ELEMENTS # set itetclr to ice material cmo/setatt/mo/itetclr/eltset,get,e30/30 49900 values reset for attribute itetclr dump/proto_full_poly.exo/mo dump/exo/proto_full_poly.exo/mo ExodusII: Start writing to file: proto_full_poly.exo using cmo: mo cmo/set_id/mo/element/e_num_temp cmo/addatt/mo e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo/index/ascending/ikey_utr/itetclr/e_num_temp cmo/addatt/mo/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo/e_num_temp finish cmo/modatt/mo/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 311273 number of elements: 602112 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 0 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo/itetclr/ioflag/l finish ExodusII: Done writing to file: proto_full_poly.exo using cmo: mo finish dump/proto_full_poly.gmv/mo dump/gmv/proto_full_poly.gmv/mo cmo/modatt/-def-/-def-/ioflag/x finish finish dump/proto_full_poly.inp/mo dump/avs/proto_full_poly.inp/mo cmo/modatt/-def-/-def-/ioflag/x finish finish ############# CHECK FINAL MESH ####################### # Full stacked mesh cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 30 29 602112 cmo/printatt mo mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 1 6 5 602112 cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 311273 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 311273 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 311273 # ice wedge mesh object cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 30 30 0 804 cmo/printatt mo_ice mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 30 30 0 804 cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 1809 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 1809 zic 1.204300165E+00 4.342238426E+00 3.137938261E+00 1809 # merge for viewing in same space cmo setatt mo itetclr 1 602112 values reset for attribute itetclr cmo setatt mo_ice itetclr 2 804 values reset for attribute itetclr addmesh/merge/mo_merge/mo/mo_ice searching for mo_merge attributes in mo_ice attribute not found: 67 ielemclr attribute not found: 69 ikey_utr ADDMESH: 2 attributes not copied from mo_ice to mo_merge dump gmv ck_merge_full_ice.gmv mo_merge cmo/modatt/-def-/-def-/ioflag/x finish # DONE # Final Files: # proto_full_poly.exo # proto_full_poly.gmv # proto_full_poly.inp finish LaGriT successfully completed