* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Jul 19 10:03:35 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # read the file with the 3D polygon mesh # this is a triangle mesh stacked into prism elements # such that tri faces show top and bottom, quads on sides # itetclr materials have been defined, facesets have not read/proto_full_poly.inp/mo_pri read/avs/proto_full_poly.inp/mo_pri cmo/addatt/mo_pri/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/mat_orig/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ikey_utr/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 311273 number of elements = 602112 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active finish finish cmo status mo_pri The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 311273 number of elements = 602112 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo agl 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 3.113E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 6.021E+05 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 8.255E-12 35 epsilona REAL scalar scalar const perma l 3.069E-10 36 epsilonv REAL scalar scalar const perma l 8.950E-10 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 3.113E+05 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 4.635E+01 52 ymin REAL scalar scalar const perma l 1.062E+02 53 zmin REAL scalar scalar const perma l -1.000E+00 54 xmax REAL scalar scalar const perma l 7.184E+01 55 ymax REAL scalar scalar const perma l 1.326E+02 56 zmax REAL scalar scalar const perma l 4.992E+00 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VDOU scalar nnodes linea perma gxa 0.000E+00 67 ielemclr VINT scalar nnodes linea perma gxa 0.000E+00 68 mat_orig VINT scalar nelements linea perma gxa 0.000E+00 69 ikey_utr VINT scalar nelements linea perma gxa 0.000E+00 ## Extract the outside surface of the polygon mesh # The extracted surface will have the element and element face # that were extracted from the 3D mesh elements # attributes, idelem1 and idface1 are written to faceset files # with each file grouped into seperate faceset files #### IMPORTANT ################### # The cells MUST be pre-sorted by itetclr material values # Exodus will reorder elements internally, we do not want the # cells to be re-ordered. If they are, faceset correlation to # the cell numbers will no longer be correct. # Check that facesets are correct by reading the exo file into GMV # and selecting Surfaces under Display. #--------- BEFORE EXTRACT -------------------------------------- # sort based on itetclr values and cell location # secondary sort conventions are up to user # xmed, ymed, zmed will arrange into columns (after itetclr sort) createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo_pri/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo_pri/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey geniee finish dump/gmv/out_tmp_sort1.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo/DELATT/mo_pri/ikey # sort nodes based on mesh convention z, y, then x sort/mo_pri/index/ascending/ikey/zic yic xic cmo/addatt/mo_pri/ikey/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey dump gmv tmp_sort.gmv mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo_pri xmed cmo DELATT mo_pri ymed cmo DELATT mo_pri zmed cmo DELATT mo_pri ikey #---------------------------------------------------------------- extract/surfmesh/1 0 0/mo_surf/mo_pri/external cmo/addatt/mo_surf/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_surf/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/printatt/mo_surf/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 20098 scalar 1 1 0 1 vector 3 3 0 1 nnodes 20098 20098 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 26368 26368 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 20098 ialias 0 0 0 20098 imt1 1 1 0 20098 itp1 0 2 2 20098 icr1 0 0 0 20098 isn1 0 0 0 20098 xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 20098 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 20098 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 20098 xtetwd 0 0 0 26368 itetclr 1 1 0 26368 itettyp 3 4 1 26368 itetoff 0 92924 92924 26368 jtetoff 0 92924 92924 26368 itet 0 20098 20098 26368x* jtet 0 263674 263674 26368x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 20098 20098 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 26368 itetclr1 1 30 29 26368 idnode0 1 311273 311272 20098 idelem0 0 0 0 26368 idelem1 1 602112 602111 26368 facecol 1 6 5 26368 idface0 0 0 0 26368 idface1 1 5 4 26368 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 20098 ielemclr 30 31 1 20098 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab ## Set surface elements to direction they face based on normals # These values will be written to itetclr, copy to id_side attribute # 1 = bottom # 2 = top # 3 = east right # 4 = north back # 5 = west left # 6 = south front cmo/addatt/mo_surf/id_side/vint/scalar/nelements cmo/select mo_surf settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 20096 out of 26368 element colors changed. cmo/copyatt/mo_surf mo_surf/id_side itetclr 26368 copied from mo_surf itetclr to -> mo_surf id_side cmo/printatt/mo_surf/id_side/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH id_side 1 6 5 26368 # this was previous convention, use settets convention instead. # so that top is now 2 and 1 is bottom, etc. # the settets convention is more widely used # cmo / setatt / mo_surf / id_side / eltset get etop / 1 # cmo / setatt / mo_surf / id_side / eltset get ebot / 2 # cmo / setatt / mo_surf / id_side / eltset get efro / 3 # cmo / setatt / mo_surf / id_side / eltset get ebac / 4 # cmo / setatt / mo_surf / id_side / eltset get elef / 5 # cmo / setatt / mo_surf / id_side / eltset get erig / 6 define/FILENAME/fs_3_rig.faceset define/SS_ID/3 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 6144 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 20224 ELEMENTS rmpoint/element/eltset get e_delete Dudded 13793 points plus parents, and 20224 elements removed. rmpoint/compress 13793 points removed and 0 elements removed. The new point count is 6305. The new element count is 6144. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_4_bac.faceset define/SS_ID/4 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 3072 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 23296 ELEMENTS rmpoint/element/eltset get e_delete Dudded 16897 points plus parents, and 23296 elements removed. rmpoint/compress 16897 points removed and 0 elements removed. The new point count is 3201. The new element count is 3072. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_5_lef.faceset define/SS_ID/5 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 1536 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 24832 ELEMENTS rmpoint/element/eltset get e_delete Dudded 18449 points plus parents, and 24832 elements removed. rmpoint/compress 18449 points removed and 0 elements removed. The new point count is 1649. The new element count is 1536. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_6_fro.faceset define/SS_ID/6 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 3072 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 23296 ELEMENTS rmpoint/element/eltset get e_delete Dudded 16897 points plus parents, and 23296 elements removed. rmpoint/compress 16897 points removed and 0 elements removed. The new point count is 3201. The new element count is 3072. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_1_bot.faceset define/SS_ID/1 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 6272 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 20096 ELEMENTS rmpoint/element/eltset get e_delete Dudded 16889 points plus parents, and 20096 elements removed. rmpoint/compress 16889 points removed and 0 elements removed. The new point count is 3209. The new element count is 6272. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_2_top.faceset define/SS_ID/2 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 6272 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 20096 ELEMENTS rmpoint/element/eltset get e_delete Dudded 16889 points plus parents, and 20096 elements removed. rmpoint/compress 16889 points removed and 0 elements removed. The new point count is 3209. The new element count is 6272. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish #---------------------------------------------------------------- ## CHECK that top number of faces = bottom = layer # this version layer has number of elements = 6272 #---------------------------------------------------------------- ######################## Add Top Corners Section ################ # Find facesets at top corners for Boundary Conditions # Using x,y points of the input polygons (before triangulation) # Points are found on outside surface of full mesh, no internal nodes # Write exodus file to check corner point facesets # fs_7_Csides.faceset and fs_8_Ctop.faceset # (exodus assigns side set id based on file count) define FPOLY_PTS boundary_points.inp infile bc_corner_faceset.mlgi # MUST DEFINE INPUT FILE FPOLY_PTS # output files and SS ID NUMBERS define SS_C_SIDE 7 define SS_C_TOP 8 define FILE_C_SIDE fs_7_Csides.faceset define FILE_C_TOP fs_8_Ctop.faceset # find and set top corner pts and facesets # use attribute layertyp = -2 from stack command # set top corner point faces (side) = SS_C_SIDE # set top corner point faces (top) = SS_C_TOP read avs FPOLY_PTS mo_cpts cmo/status/brief The current-mesh-object(CMO) is: mo_cpts 1 Mesh Object name: mo_pri number of nodes = 311273 number of elements = 602112 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_surf number of nodes = 20098 number of elements = 26368 dimensions geometry = 3 element type = hyb dimensions topology = 2 10 nodes 10 faces 12 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cpts number of nodes = 5 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish # CHECK input poly points # zic should be 0, or set to 0 here cmo/printatt/mo_cpts/-xyz- minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709800E+01 7.184000000E+01 2.549290200E+01 5 yic 1.062200000E+02 1.326065200E+02 2.638652000E+01 5 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 5 cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp cmo/addatt/mo_tmp/bc_faces/vint/scalar/nelements ########################## # Find the top points 0 distance from poly corner points cmo addatt mo_tmp zicsave VDOUBLE/scalar/nnodes cmo copyatt mo_tmp mo_tmp zicsave zic 20098 copied from mo_tmp zic to -> mo_tmp zicsave cmo setatt mo_tmp zic 0. 20098 values reset for attribute zic compute/distance_field/mo_tmp/mo_cpts/xdist cmo/addatt/mo_tmp/temp_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/yobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/zobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xdist/VDOUBLE/scalar/nnodes/linear/permanent//-1.0 finish interpolate/voronoi/mo_tmp/xobj_tmp_var/1 0 0/mo_cpts/xic/keepatt nodes in indexed point set = 20098 cmo/addatt/mo_tmp/pt_gtg/VINT/scalar/nnodes//permanent/agfx/0 finish INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.728400000000E+02 pt_gtg attribute will be added and kept. Sink point Points searched Points Found Percent Done 1006 1006 1006 5 % 2011 2011 2011 10 % 3016 3016 3016 15 % 4021 4021 4021 20 % 5026 5026 5026 25 % 6031 6031 6031 30 % 7036 7036 7036 35 % 8041 8041 8041 40 % 9046 9046 9046 45 % 10051 10051 10051 50 % 11056 11056 11056 55 % 12061 12061 12061 60 % 13066 13066 13066 65 % 14071 14071 14071 70 % 15076 15076 15076 75 % 16081 16081 16081 80 % 17086 17086 17086 85 % 18091 18091 18091 90 % 19096 19096 19096 95 % 20098 20098 20098 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/yobj_tmp_var/1 0 0/mo_cpts/yic/keepatt nodes in indexed point set = 20098 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.133606520000E+03 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1006 1006 1006 5 % 2011 2011 2011 10 % 3016 3016 3016 15 % 4021 4021 4021 20 % 5026 5026 5026 25 % 6031 6031 6031 30 % 7036 7036 7036 35 % 8041 8041 8041 40 % 9046 9046 9046 45 % 10051 10051 10051 50 % 11056 11056 11056 55 % 12061 12061 12061 60 % 13066 13066 13066 65 % 14071 14071 14071 70 % 15076 15076 15076 75 % 16081 16081 16081 80 % 17086 17086 17086 85 % 18091 18091 18091 90 % 19096 19096 19096 95 % 20098 20098 20098 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/zobj_tmp_var/1 0 0/mo_cpts/zic nodes in indexed point set = 20098 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.100000000000E+01 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1006 1006 1006 5 % 2011 2011 2011 10 % 3016 3016 3016 15 % 4021 4021 4021 20 % 5026 5026 5026 25 % 6031 6031 6031 30 % 7036 7036 7036 35 % 8041 8041 8041 40 % 9046 9046 9046 45 % 10051 10051 10051 50 % 11056 11056 11056 55 % 12061 12061 12061 60 % 13066 13066 13066 65 % 14071 14071 14071 70 % 15076 15076 15076 75 % 16081 16081 16081 80 % 17086 17086 17086 85 % 18091 18091 18091 90 % 19096 19096 19096 95 % 20098 20098 20098 Total cmo DELATT mo_tmp/pt_gtg finish cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/xic/mo_tmp/xobj_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/yic/mo_tmp/yobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/zic/mo_tmp/zobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/xdist/0.5 finish cmo/delatt/mo_tmp/temp_tmp_var finish cmo/delatt/mo_tmp/xobj_tmp_var finish cmo/delatt/mo_tmp/yobj_tmp_var finish cmo/delatt/mo_tmp/zobj_tmp_var finish COMPUTE distance_field: Done. cmo copyatt/mo_tmp mo_tmp/zic zicsave 20098 copied from mo_tmp zicsave to -> mo_tmp zic dump gmv tmp.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish pset/ptop attribute layertyp/1,0,0/eq -2 THE PSET ptop HAS 3209 POINTS pset p10 attribute xdist/pset,get,ptop lt .001 THE PSET p10 HAS 5 POINTS cmo setatt mo_tmp layertyp pset,get,p10 SS_C_SIDE 5 values reset for attribute layertyp eltset/e_tc/inclusive pset,get,p10 THE ELTSET e_tc HAS 23 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc SS_C_SIDE 23 values reset for attribute bc_faces eltset/e_top/id_side/eq 2 THE ELTSET e_top HAS 6272 ELEMENTS eltset e_tc_top inter e_top e_tc THE ELTSET e_tc_top HAS 13 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc_top SS_C_TOP 13 values reset for attribute bc_faces dump gmv tmp_bc_sides.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_SIDE cmo copy mo_tmp2 mo_tmp cmo select mo_tmp2 eltset/e_keep/bc_faces/eq/SS_C_SIDE THE ELTSET e_keep HAS 10 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 26358 ELEMENTS rmpoint/element/eltset get e_delete Dudded 20068 points plus parents, and 26358 elements removed. rmpoint/compress 20068 points removed and 0 elements removed. The new point count is 30. The new element count is 10. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp2/itetclr0 cmo/DELATT/mo_tmp2/idnode0 cmo/DELATT/mo_tmp2/idelem0 cmo/DELATT/mo_tmp2/facecol cmo/DELATT/mo_tmp2/itetclr1 cmo/DELATT/mo_tmp2/idface0 cmo/DELATT/mo_tmp2/id_side cmo/DELATT/mo_tmp2/layertyp cmo/DELATT/mo_tmp2/bc_faces dump/avs2/FILE_C_SIDE/mo_tmp2/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_TOP cmo select mo_tmp eltset/e_keep/bc_faces/eq/SS_C_TOP THE ELTSET e_keep HAS 13 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 26355 ELEMENTS rmpoint/element/eltset get e_delete Dudded 20075 points plus parents, and 26355 elements removed. rmpoint/compress 20075 points removed and 0 elements removed. The new point count is 23. The new element count is 13. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp cmo/DELATT/mo_tmp/bc_faces dump/avs2/FILE_C_TOP/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish # clean up cmo/delete/mo_tmp Released Mesh Object: mo_tmp cmo/delete/mo_tmp2 Released Mesh Object: mo_tmp2 finish dump/exo/mesh_bc.exo/mo_pri///facesets fs_7_Csides.faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_bc.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 311273 number of elements: 602112 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 2 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_bc.exo using cmo: mo_pri ############################ # write some informational files and output dump/gmv/surf_sides.gmv/mo_surf cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_surf -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 20098 scalar 1 1 0 1 vector 3 3 0 1 nnodes 20098 20098 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 26368 26368 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 20098 ialias 0 0 0 20098 imt1 1 1 0 20098 itp1 0 2 2 20098 icr1 0 0 0 20098 isn1 0 0 0 20098 xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 20098 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 20098 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 20098 xtetwd 0 0 0 26368 itetclr 1 6 5 26368 itettyp 3 4 1 26368 itetoff 0 92924 92924 26368 jtetoff 0 92924 92924 26368 itet 0 20098 20098 26368x* jtet 0 263674 263674 26368x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 20098 20098 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 26368 itetclr1 1 30 29 26368 idnode0 1 311273 311272 20098 idelem0 0 0 0 26368 idelem1 1 602112 602111 26368 facecol 1 6 5 26368 idface0 0 0 0 26368 idface1 1 5 4 26368 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 20098 ielemclr 30 31 1 20098 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab id_side 1 6 5 26368 cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 311273 scalar 1 1 0 1 vector 3 3 0 1 nnodes 311273 311273 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 602112 602112 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 311273 ialias 0 0 0 311273 imt1 1 6 5 311273 itp1 0 10 10 311273 icr1 0 0 0 311273 isn1 0 0 0 311273 xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 311273 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 311273 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 311273 xtetwd 0 0 0 602112 itetclr 1 30 29 602112 itettyp 7 7 0 602112 itetoff 0 3612666 3612666 602112 jtetoff 0 3010555 3010555 602112 itet 1 311273 311272 602112x6 jtet 2 19010557 19010555 602112x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 8.254695806E-12 8.254695806E-12 0.000000000E+00 1 epsilona 3.068752915E-10 3.068752915E-10 0.000000000E+00 1 epsilonv 8.950190043E-10 8.950190043E-10 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 311273 311273 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 4.634709930E+01 4.634709930E+01 0.000000000E+00 1 ymin 1.062200012E+02 1.062200012E+02 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 7.183999634E+01 7.183999634E+01 0.000000000E+00 1 ymax 1.326065216E+02 1.326065216E+02 0.000000000E+00 1 zmax 4.992260933E+00 4.992260933E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 311273 ielemclr 30 31 1 311273 mat_orig 1 6 5 602112 ikey_utr 1 602112 602111 602112 cmo printatt mo_pri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 311273 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 311273 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 311273 cmo select mo_pri quality volume itetclr QUALITY TOTALS for 7 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 12544 ELEMENTS finish epsilonvol: 8.9501900E-10 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... element volumes b/w 0.2284E-03 and 0.3141E-03: 50 element volumes b/w 0.3141E-03 and 0.4319E-03: 261 element volumes b/w 0.4319E-03 and 0.5940E-03: 3665 element volumes b/w 0.5940E-03 and 0.8168E-03: 8158 element volumes b/w 0.8168E-03 and 0.1123E-02: 410 min volume = 2.2839187E-04 max volume = 1.1232909E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 56448 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... element volumes b/w 0.4568E-03 and 0.6282E-03: 225 element volumes b/w 0.6282E-03 and 0.8638E-03: 1170 element volumes b/w 0.8638E-03 and 0.1188E-02: 16497 element volumes b/w 0.1188E-02 and 0.1634E-02: 36711 element volumes b/w 0.1634E-02 and 0.2247E-02: 1845 min volume = 4.5679464E-04 max volume = 2.2465283E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/3/ THE ELTSET -etmp- HAS 56448 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 3 ........................... element volumes b/w 0.4568E-03 and 0.6282E-03: 225 element volumes b/w 0.6282E-03 and 0.8639E-03: 1170 element volumes b/w 0.8639E-03 and 0.1188E-02: 16497 element volumes b/w 0.1188E-02 and 0.1634E-02: 36711 element volumes b/w 0.1634E-02 and 0.2247E-02: 1845 min volume = 4.5679464E-04 max volume = 2.2465819E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/4/ THE ELTSET -etmp- HAS 37632 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 4 ........................... element volumes b/w 0.4568E-03 and 0.6282E-03: 150 element volumes b/w 0.6282E-03 and 0.8638E-03: 780 element volumes b/w 0.8638E-03 and 0.1188E-02: 10998 element volumes b/w 0.1188E-02 and 0.1634E-02: 24474 element volumes b/w 0.1634E-02 and 0.2247E-02: 1230 min volume = 4.5679464E-04 max volume = 2.2465283E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/5/ THE ELTSET -etmp- HAS 95524 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 5 ........................... element volumes b/w 0.5710E-03 and 0.7596E-03: 454 element volumes b/w 0.7596E-03 and 0.1010E-02: 1391 element volumes b/w 0.1010E-02 and 0.1344E-02: 13566 element volumes b/w 0.1344E-02 and 0.1788E-02: 71574 element volumes b/w 0.1788E-02 and 0.2379E-02: 8539 min volume = 5.7098513E-04 max volume = 2.3788182E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/6/ THE ELTSET -etmp- HAS 293616 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 6 ........................... element volumes b/w 0.2176E-02 and 0.2984E-02: 1250 element volumes b/w 0.2984E-02 and 0.4092E-02: 6501 element volumes b/w 0.4092E-02 and 0.5611E-02: 81811 element volumes b/w 0.5611E-02 and 0.7695E-02: 198407 element volumes b/w 0.7695E-02 and 0.1055E-01: 5647 min volume = 2.1755710E-03 max volume = 1.0552938E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/30/ THE ELTSET -etmp- HAS 49900 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 30 ........................... element volumes b/w 0.6762E-03 and 0.1171E-02: 801 element volumes b/w 0.1171E-02 and 0.2030E-02: 25195 element volumes b/w 0.2030E-02 and 0.3516E-02: 3922 element volumes b/w 0.3516E-02 and 0.6091E-02: 5899 element volumes b/w 0.6091E-02 and 0.1055E-01: 14083 min volume = 6.7620044E-04 max volume = 1.0552938E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for mo_pri 1 7 ........................................................... Color Num. Elements Volume Fractional Volume 1 12544 0.7936425E+01 0.003490890 2 56448 0.7142782E+02 0.031418013 3 56448 0.7142801E+02 0.031418096 4 37632 0.4761855E+02 0.020945342 5 95524 0.1464469E+03 0.064415680 6 293616 0.1745817E+04 0.767909504 30 49900 0.1827924E+03 0.080402475 Total elements: 602112 Total Volume: 0.2273467E+04 ----------------------------------------------------------- 602112 total elements evaluated. ############################ # write final mesh with multi material and all facesets # node imt does not seem to be included in exo files dump/exo/mesh_fsets.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3 _rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset fs_7_Csides.face set fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_fsets.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 311273 number of elements: 602112 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 8 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets.exo using cmo: mo_pri dump/avs2/mesh_fsets.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish ############################ # version with single material and top faceset only cmo setatt mo_pri itetclr 1 602112 values reset for attribute itetclr cmo setatt mo_pri imt 1 311273 values reset for attribute imt1 resetpts itp geniee finish dump/exo/mesh_fsets_1mat.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset fs_7_Csides .faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_fsets_1mat.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 311273 number of elements: 602112 number of edges: 0 number of edge blocks: 0 number of element blocks: 1 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 8 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets_1mat.exo using cmo: mo_pri dump/avs2/mesh_fsets_1mat.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets_1mat.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 311273 scalar 1 1 0 1 vector 3 3 0 1 nnodes 311273 311273 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 602112 602112 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 311273 ialias 0 0 0 311273 imt1 1 1 0 311273 itp1 0 10 10 311273 icr1 0 0 0 311273 isn1 0 0 0 311273 xic 4.634709930E+01 7.183999634E+01 2.549289703E+01 311273 yic 1.062200012E+02 1.326065216E+02 2.638652039E+01 311273 zic -1.000000000E+00 4.992260933E+00 5.992260933E+00 311273 xtetwd 0 0 0 602112 itetclr 1 1 0 602112 itettyp 7 7 0 602112 itetoff 0 3612666 3612666 602112 jtetoff 0 3010555 3010555 602112 itet 1 311273 311272 602112x6 jtet 1 16000000 15999999 602112x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 8.254695806E-12 8.254695806E-12 0.000000000E+00 1 epsilona 3.068752915E-10 3.068752915E-10 0.000000000E+00 1 epsilonv 8.950190043E-10 8.950190043E-10 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 311273 311273 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 4.634709930E+01 4.634709930E+01 0.000000000E+00 1 ymin 1.062200012E+02 1.062200012E+02 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 7.183999634E+01 7.183999634E+01 0.000000000E+00 1 ymax 1.326065216E+02 1.326065216E+02 0.000000000E+00 1 zmax 4.992260933E+00 4.992260933E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 311273 ielemclr 30 31 1 311273 mat_orig 1 6 5 602112 ikey_utr 1 602112 602111 602112 finish LaGriT successfully completed