* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Nov 6 10:33:59 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # Interpolate ice wedge mesh on to full stacked mesh # This will overwrite material layers with ice 30 # Input the ice wedge mesh object read/gmv/ice_wedge.gmv/mo_ice Reading GMV binary file gmvinputieee cmo/addatt/mo_ice/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee geniee: mesh has 351 self-degenerate faces ELMTESTD WARNING: mesh has 0 degenerate elements and 404 self-degenerate elements finish Nodes: 1009 Elements: 514 Done reading GMV binary total bytes: 111344 file: ice_wedge.gmv cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.178399963E+02 1.355899963E+02 1.775000000E+01 1009 yic 4.647000122E+01 6.374094009E+01 1.727093887E+01 1009 zic 1.129400015E+00 4.313066483E+00 3.183666468E+00 1009 cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 1 0 514 cmo/setatt/mo_ice/itetclr/30 514 values reset for attribute itetclr cmo/copyatt/mo_ice/mo_ice/mat_orig/itetclr CMO_COPYATT WARNING: attribute does not exist: attribute now created: mat_orig cmo/addatt/mo_ice/mat_orig/VINT/scalar/nelements/user/permanent/l finish 514 copied from mo_ice itetclr to -> mo_ice mat_orig # Input the full stacked mesh read/gmv/full_mesh.gmv/mo Reading GMV binary file gmvinputieee cmo/addatt/mo/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee finish Nodes: 229284 Elements: 435968 Done reading GMV binary total bytes: 28506852 file: full_mesh.gmv cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.178399963E+02 1.355899963E+02 1.775000000E+01 229284 yic 4.647000122E+01 6.374094009E+01 1.727093887E+01 229284 zic -4.500000000E+01 4.837786674E+00 4.983778667E+01 229284 cmo/addatt/mo/ielemclr/VINT/scalar/nnodes cmo/addatt/mo/mat_orig/VINT/scalar/nelements cmo/copyatt/mo/mo/mat_orig/itetclr 435968 copied from mo itetclr to -> mo mat_orig # Interpolate ice wedge mesh on to full mesh node attribute ielemclr # Save itetclr to mat_orig before overwriting cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 6 5 435968 intrp/map/mo ielemclr/1,0,0/mo_ice itetclr nodes in indexed point set = 229284 INTRP METHOD: map FUNCTION: user TIEBREAKER: maxtie FLAG: plus1 0.310000000000E+02 cmo select mo_ice finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 11465 0 0 5 % 22929 0 0 10 % 34393 0 0 15 % 45857 0 0 20 % 57321 0 0 25 % 68785 0 0 30 % 80249 0 0 35 % 91713 0 0 40 % 103177 0 0 45 % 114641 1124 486 50 % 126105 3550 1788 55 % 137569 6905 4050 60 % 149033 11295 7139 65 % 160497 16600 10698 70 % 171961 22266 14492 75 % 183425 28415 18460 80 % 194889 28683 18661 85 % 206353 28683 18661 90 % 217817 28683 18661 95 % 229281 28683 18661 100 % 229284 28683 18661 Total cmo select mo finish WARNING: Sink points not inside source grid: 210623 Total sink points marked: 210623 with flag: 31.00 intrp/map done. cmo kdtree release cmo/DELATT/mo_ice/sbox finish cmo/DELATT/mo_ice/v12 finish cmo/DELATT/mo_ice/linkt finish cmo/DELATT/mo_ice/v2 finish finish # CHECK nodes should be values 30 and 31 (outside ice) cmo/printatt/mo/ielemclr/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH ielemclr 30 31 1 229284 # Find nodes set with ice value 30 cmo/select/mo pset/p_ice/attribute/ielemclr/1,0,0/eq/30 THE PSET p_ice HAS 18661 POINTS # Find elements with nodes set to ice # note inclusion or exclusion options select more or less eltset/e_ice/inclusive/pset get p_ice THE ELTSET e_ice HAS 39489 ELEMENTS #eltset / e_ice / exclusive / pset get p_ice # Find elements in layers where ice exists # Note Material order 1 at top to bottom n define MAX_ICELAYER 4 eltset e_all itetclr ge 1 THE ELTSET e_all HAS 435968 ELEMENTS eltset/e_maxl/itetclr/gt/MAX_ICELAYER THE ELTSET e_maxl HAS 349440 ELEMENTS # CHECK bounds of ice over all materials eltset e_all_e30 inter e_ice e_all THE ELTSET e_all_e30 HAS 39489 ELEMENTS # Find elements of ice in permitted layers only eltset/e30/inter/e_ice e_maxl THE ELTSET e30 HAS 38334 ELEMENTS # set itetclr to ice material cmo/setatt/mo/itetclr/eltset,get,e30/30 38334 values reset for attribute itetclr dump/proto_full_poly.exo/mo dump/exo/proto_full_poly.exo/mo ExodusII: Start writing to file: proto_full_poly.exo using cmo: mo cmo/set_id/mo/element/e_num_temp cmo/addatt/mo e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo/index/ascending/ikey_utr/itetclr/e_num_temp cmo/addatt/mo/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo/e_num_temp finish cmo/modatt/mo/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 229284 number of elements: 435968 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 0 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo/itetclr/ioflag/l finish ExodusII: Done writing to file: proto_full_poly.exo using cmo: mo finish dump/proto_full_poly.gmv/mo dump/gmv/proto_full_poly.gmv/mo cmo/modatt/-def-/-def-/ioflag/x finish finish dump/proto_full_poly.inp/mo dump/avs/proto_full_poly.inp/mo cmo/modatt/-def-/-def-/ioflag/x finish finish ############# CHECK FINAL MESH ####################### # Full stacked mesh cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 30 29 435968 cmo/printatt mo mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 1 6 5 435968 cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.178399963E+02 1.355899963E+02 1.775000000E+01 229284 yic 4.647000122E+01 6.374094009E+01 1.727093887E+01 229284 zic -4.500000000E+01 4.837786674E+00 4.983778667E+01 229284 # ice wedge mesh object cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 30 30 0 514 cmo/printatt mo_ice mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 30 30 0 514 cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.178399963E+02 1.355899963E+02 1.775000000E+01 1009 yic 4.647000122E+01 6.374094009E+01 1.727093887E+01 1009 zic 1.129400015E+00 4.313066483E+00 3.183666468E+00 1009 # merge for viewing in same space cmo setatt mo itetclr 1 435968 values reset for attribute itetclr cmo setatt mo_ice itetclr 2 514 values reset for attribute itetclr addmesh/merge/mo_merge/mo/mo_ice searching for mo_merge attributes in mo_ice attribute not found: 67 ielemclr attribute not found: 69 ikey_utr ADDMESH: 2 attributes not copied from mo_ice to mo_merge dump gmv ck_merge_full_ice.gmv mo_merge cmo/modatt/-def-/-def-/ioflag/x finish # DONE # Final Files: # proto_full_poly.exo # proto_full_poly.gmv # proto_full_poly.inp finish LaGriT successfully completed