* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Nov 6 14:31:02 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # Interpolate ice wedge mesh on to full stacked mesh # This will overwrite material layers with ice 30 # Input the ice wedge mesh object read/gmv/ice_wedge.gmv/mo_ice Reading GMV binary file gmvinputieee cmo/addatt/mo_ice/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee geniee: mesh has 457 self-degenerate faces ELMTESTD WARNING: mesh has 0 degenerate elements and 524 self-degenerate elements finish Nodes: 1491 Elements: 726 Done reading GMV binary total bytes: 158520 file: ice_wedge.gmv cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 1491 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 1491 zic 1.210000277E+00 4.275807858E+00 3.065807581E+00 1491 cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 1 0 726 cmo/setatt/mo_ice/itetclr/30 726 values reset for attribute itetclr cmo/copyatt/mo_ice/mo_ice/mat_orig/itetclr CMO_COPYATT WARNING: attribute does not exist: attribute now created: mat_orig cmo/addatt/mo_ice/mat_orig/VINT/scalar/nelements/user/permanent/l finish 726 copied from mo_ice itetclr to -> mo_ice mat_orig # Input the full stacked mesh read/gmv/full_mesh.gmv/mo Reading GMV binary file gmvinputieee cmo/addatt/mo/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxa/0.0 finish no geometry for mesh object geniee finish Nodes: 330660 Elements: 637184 Done reading GMV binary total bytes: 41016036 file: full_mesh.gmv cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 330660 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 330660 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 330660 cmo/addatt/mo/ielemclr/VINT/scalar/nnodes cmo/addatt/mo/mat_orig/VINT/scalar/nelements cmo/copyatt/mo/mo/mat_orig/itetclr 637184 copied from mo itetclr to -> mo mat_orig # Interpolate ice wedge mesh on to full mesh node attribute ielemclr # Save itetclr to mat_orig before overwriting cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 6 5 637184 intrp/map/mo ielemclr/1,0,0/mo_ice itetclr nodes in indexed point set = 330660 INTRP METHOD: map FUNCTION: user TIEBREAKER: maxtie FLAG: plus1 0.310000000000E+02 cmo select mo_ice finish cmo kdtree build cmo/addatt//v2/INT/scalar/scalar/constant/temporary//2.0 finish cmo/addatt//linkt/VINT/v2/nelements//temporary/x/0.0 finish cmo/addatt//v12/INT/scalar/scalar/constant/temporary//12.0 finish cmo/addatt//sbox/VDOUBLE/v12/nelements/linear/temporary/x/0.0 finish finish Sink point Elems Searched Elements Found Percent Done 16534 0 0 5 % 33067 0 0 10 % 49600 0 0 15 % 66133 0 0 20 % 82666 0 0 25 % 99199 0 0 30 % 115732 0 0 35 % 132265 0 0 40 % 148798 0 0 45 % 165331 1063 468 50 % 181864 3359 1806 55 % 198397 6842 4305 60 % 214930 11501 7843 65 % 231463 17356 12036 70 % 247996 23371 16359 75 % 264529 29718 20880 80 % 281062 30056 21116 85 % 297595 30056 21116 90 % 314128 30056 21116 95 % 330660 30056 21116 Total cmo select mo finish WARNING: Sink points not inside source grid: 309544 Total sink points marked: 309544 with flag: 31.00 intrp/map done. cmo kdtree release cmo/DELATT/mo_ice/sbox finish cmo/DELATT/mo_ice/v12 finish cmo/DELATT/mo_ice/linkt finish cmo/DELATT/mo_ice/v2 finish finish # CHECK nodes should be values 30 and 31 (outside ice) cmo/printatt/mo/ielemclr/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH ielemclr 30 31 1 330660 # Find nodes set with ice value 30 cmo/select/mo pset/p_ice/attribute/ielemclr/1,0,0/eq/30 THE PSET p_ice HAS 21116 POINTS # Find elements with nodes set to ice # note inclusion or exclusion options select more or less eltset/e_ice/inclusive/pset get p_ice THE ELTSET e_ice HAS 47173 ELEMENTS #eltset / e_ice / exclusive / pset get p_ice # Find elements in layers where ice exists # Note Material order 1 at top to bottom n define MAX_ICELAYER 4 eltset e_all itetclr ge 1 THE ELTSET e_all HAS 637184 ELEMENTS eltset/e_maxl/itetclr/gt/MAX_ICELAYER THE ELTSET e_maxl HAS 510720 ELEMENTS # CHECK bounds of ice over all materials eltset e_all_e30 inter e_ice e_all THE ELTSET e_all_e30 HAS 47173 ELEMENTS # Find elements of ice in permitted layers only eltset/e30/inter/e_ice e_maxl THE ELTSET e30 HAS 45816 ELEMENTS # set itetclr to ice material cmo/setatt/mo/itetclr/eltset,get,e30/30 45816 values reset for attribute itetclr dump/proto_full_poly.exo/mo dump/exo/proto_full_poly.exo/mo ExodusII: Start writing to file: proto_full_poly.exo using cmo: mo cmo/set_id/mo/element/e_num_temp cmo/addatt/mo e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo/index/ascending/ikey_utr/itetclr/e_num_temp cmo/addatt/mo/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo/e_num_temp finish cmo/modatt/mo/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 330660 number of elements: 637184 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 0 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo/itetclr/ioflag/l finish ExodusII: Done writing to file: proto_full_poly.exo using cmo: mo finish dump/proto_full_poly.gmv/mo dump/gmv/proto_full_poly.gmv/mo cmo/modatt/-def-/-def-/ioflag/x finish finish dump/proto_full_poly.inp/mo dump/avs/proto_full_poly.inp/mo cmo/modatt/-def-/-def-/ioflag/x finish finish ############# CHECK FINAL MESH ####################### # Full stacked mesh cmo/printatt mo itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 1 30 29 637184 cmo/printatt mo mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 1 6 5 637184 cmo/printatt mo -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 330660 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 330660 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 330660 # ice wedge mesh object cmo/printatt mo_ice itetclr minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH itetclr 30 30 0 726 cmo/printatt mo_ice mat_orig minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH mat_orig 30 30 0 726 cmo/printatt mo_ice -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 1491 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 1491 zic 1.210000277E+00 4.275807858E+00 3.065807581E+00 1491 # merge for viewing in same space cmo setatt mo itetclr 1 637184 values reset for attribute itetclr cmo setatt mo_ice itetclr 2 726 values reset for attribute itetclr addmesh/merge/mo_merge/mo/mo_ice searching for mo_merge attributes in mo_ice attribute not found: 67 ielemclr attribute not found: 69 ikey_utr ADDMESH: 2 attributes not copied from mo_ice to mo_merge dump gmv ck_merge_full_ice.gmv mo_merge cmo/modatt/-def-/-def-/ioflag/x finish # DONE # Final Files: # proto_full_poly.exo # proto_full_poly.gmv # proto_full_poly.inp finish LaGriT successfully completed