* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Nov 6 14:31:23 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # read the file with the 3D polygon mesh # this is a triangle mesh stacked into prism elements # such that tri faces show top and bottom, quads on sides # itetclr materials have been defined, facesets have not read/proto_full_poly.inp/mo_pri read/avs/proto_full_poly.inp/mo_pri cmo/addatt/mo_pri/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/mat_orig/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ikey_utr/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 330660 number of elements = 637184 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active finish finish cmo status mo_pri The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 330660 number of elements = 637184 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo agl 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 3.307E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 6.372E+05 8 mbndry INT scalar scalar const perma l 1.600E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 1.349E-11 35 epsilona REAL scalar scalar const perma l 8.195E-10 36 epsilonv REAL scalar scalar const perma l 6.631E-09 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 3.307E+05 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.003E+02 52 ymin REAL scalar scalar const perma l 8.847E+01 53 zmin REAL scalar scalar const perma l -4.500E+01 54 xmax REAL scalar scalar const perma l 1.267E+02 55 ymax REAL scalar scalar const perma l 1.112E+02 56 zmax REAL scalar scalar const perma l 4.777E+00 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VDOU scalar nnodes linea perma gxa 0.000E+00 67 ielemclr VINT scalar nnodes linea perma gxa 0.000E+00 68 mat_orig VINT scalar nelements linea perma gxa 0.000E+00 69 ikey_utr VINT scalar nelements linea perma gxa 0.000E+00 ## Extract the outside surface of the polygon mesh # The extracted surface will have the element and element face # that were extracted from the 3D mesh elements # attributes, idelem1 and idface1 are written to faceset files # with each file grouped into seperate faceset files #### IMPORTANT ################### # The cells MUST be pre-sorted by itetclr material values # Exodus will reorder elements internally, we do not want the # cells to be re-ordered. If they are, faceset correlation to # the cell numbers will no longer be correct. # Check that facesets are correct by reading the exo file into GMV # and selecting Surfaces under Display. #--------- BEFORE EXTRACT -------------------------------------- # sort based on itetclr values and cell location # secondary sort conventions are up to user # xmed, ymed, zmed will arrange into columns (after itetclr sort) createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo_pri/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo_pri/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey geniee finish dump/gmv/out_tmp_sort1.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo/DELATT/mo_pri/ikey # sort nodes based on mesh convention z, y, then x sort/mo_pri/index/ascending/ikey/zic yic xic cmo/addatt/mo_pri/ikey/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey dump gmv tmp_sort.gmv mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo_pri xmed cmo DELATT mo_pri ymed cmo DELATT mo_pri zmed cmo DELATT mo_pri ikey #---------------------------------------------------------------- extract/surfmesh/1 0 0/mo_surf/mo_pri/external cmo/addatt/mo_surf/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_surf/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/printatt/mo_surf/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 23730 scalar 1 1 0 1 vector 3 3 0 1 nnodes 23730 23730 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 28592 28592 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 23730 ialias 0 0 0 23730 imt1 1 1 0 23730 itp1 0 2 2 23730 icr1 0 0 0 23730 isn1 0 0 0 23730 xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 23730 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 23730 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 23730 xtetwd 0 0 0 28592 itetclr 1 1 0 28592 itettyp 3 4 1 28592 itetoff 0 104636 104636 28592 jtetoff 0 104636 104636 28592 itet 0 23730 23730 28592x* jtet 0 285914 285914 28592x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 23730 23730 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 28592 itetclr1 1 30 29 28592 idnode0 1 330660 330659 23730 idelem0 0 0 0 28592 idelem1 1 637184 637183 28592 facecol 1 6 5 28592 idface0 0 0 0 28592 idface1 1 5 4 28592 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 23730 ielemclr 30 31 1 23730 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab ## Set surface elements to direction they face based on normals # These values will be written to itetclr, copy to id_side attribute # 1 = bottom # 2 = top # 3 = east right # 4 = north back # 5 = west left # 6 = south front cmo/addatt/mo_surf/id_side/vint/scalar/nelements cmo/select mo_surf settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 23728 out of 28592 element colors changed. cmo/copyatt/mo_surf mo_surf/id_side itetclr 28592 copied from mo_surf itetclr to -> mo_surf id_side cmo/printatt/mo_surf/id_side/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH id_side 1 6 5 28592 # this was previous convention, use settets convention instead. # so that top is now 2 and 1 is bottom, etc. # the settets convention is more widely used # cmo / setatt / mo_surf / id_side / eltset get etop / 1 # cmo / setatt / mo_surf / id_side / eltset get ebot / 2 # cmo / setatt / mo_surf / id_side / eltset get efro / 3 # cmo / setatt / mo_surf / id_side / eltset get ebac / 4 # cmo / setatt / mo_surf / id_side / eltset get elef / 5 # cmo / setatt / mo_surf / id_side / eltset get erig / 6 define/FILENAME/fs_3_rig.faceset define/SS_ID/3 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4192 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 24400 ELEMENTS rmpoint/element/eltset get e_delete Dudded 19374 points plus parents, and 24400 elements removed. rmpoint/compress 19374 points removed and 0 elements removed. The new point count is 4356. The new element count is 4192. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_4_bac.faceset define/SS_ID/4 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 10480 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 18112 ELEMENTS rmpoint/element/eltset get e_delete Dudded 13038 points plus parents, and 18112 elements removed. rmpoint/compress 13038 points removed and 0 elements removed. The new point count is 10692. The new element count is 10480. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_5_lef.faceset define/SS_ID/5 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 0 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28592 ELEMENTS rmpoint/element/eltset get e_delete Dudded 23730 points plus parents, there are no elements in mesh. rmpoint/compress 23730 points removed and 0 elements removed. The new point count is 0. The new element count is 0. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. WARNING: dumpavs WARNING: nnodes=0 nelements = 0 WARNING: No output dump/gmv/tmp_faceset.gmv mo_tmp DUMP/GMV early exit: no nodes in cmo: mo_tmp DUMP/GMV ERROR: could not open file for: mo_tmp cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_6_fro.faceset define/SS_ID/6 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4192 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 24400 ELEMENTS rmpoint/element/eltset get e_delete Dudded 19374 points plus parents, and 24400 elements removed. rmpoint/compress 19374 points removed and 0 elements removed. The new point count is 4356. The new element count is 4192. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_1_bot.faceset define/SS_ID/1 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4864 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 23728 ELEMENTS rmpoint/element/eltset get e_delete Dudded 21225 points plus parents, and 23728 elements removed. rmpoint/compress 21225 points removed and 0 elements removed. The new point count is 2505. The new element count is 4864. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_2_top.faceset define/SS_ID/2 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4864 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 23728 ELEMENTS rmpoint/element/eltset get e_delete Dudded 21225 points plus parents, and 23728 elements removed. rmpoint/compress 21225 points removed and 0 elements removed. The new point count is 2505. The new element count is 4864. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish #---------------------------------------------------------------- ## CHECK that top number of faces = bottom = layer # this version layer has number of elements = 6272 #---------------------------------------------------------------- ######################## Add Top Corners Section ################ # Find facesets at top corners for Boundary Conditions # Using x,y points of the input polygons (before triangulation) # Points are found on outside surface of full mesh, no internal nodes # Write exodus file to check corner point facesets # fs_7_Csides.faceset and fs_8_Ctop.faceset # (exodus assigns side set id based on file count) define FPOLY_PTS boundary_points.inp infile bc_corner_faceset.mlgi # MUST DEFINE INPUT FILE FPOLY_PTS # output files and SS ID NUMBERS define SS_C_SIDE 7 define SS_C_TOP 8 define FILE_C_SIDE fs_7_Csides.faceset define FILE_C_TOP fs_8_Ctop.faceset # find and set top corner pts and facesets # use attribute layertyp = -2 from stack command # set top corner point faces (side) = SS_C_SIDE # set top corner point faces (top) = SS_C_TOP read avs FPOLY_PTS mo_cpts cmo/status/brief The current-mesh-object(CMO) is: mo_cpts 1 Mesh Object name: mo_pri number of nodes = 330660 number of elements = 637184 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 16000000 status = inactive 2 Mesh Object name: mo_surf number of nodes = 23730 number of elements = 28592 dimensions geometry = 3 element type = hyb dimensions topology = 2 10 nodes 10 faces 12 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cpts number of nodes = 5 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish # CHECK input poly points # zic should be 0, or set to 0 here cmo/printatt/mo_cpts/-xyz- minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425780E+02 1.267149660E+02 2.637238800E+01 5 yic 8.847044000E+01 1.112200000E+02 2.274956000E+01 5 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 5 cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp cmo/addatt/mo_tmp/bc_faces/vint/scalar/nelements ########################## # Find the top points 0 distance from poly corner points cmo addatt mo_tmp zicsave VDOUBLE/scalar/nnodes cmo copyatt mo_tmp mo_tmp zicsave zic 23730 copied from mo_tmp zic to -> mo_tmp zicsave cmo setatt mo_tmp zic 0. 23730 values reset for attribute zic compute/distance_field/mo_tmp/mo_cpts/xdist cmo/addatt/mo_tmp/temp_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/yobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/zobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xdist/VDOUBLE/scalar/nnodes/linear/permanent//-1.0 finish interpolate/voronoi/mo_tmp/xobj_tmp_var/1 0 0/mo_cpts/xic/keepatt nodes in indexed point set = 23730 cmo/addatt/mo_tmp/pt_gtg/VINT/scalar/nnodes//permanent/agfx/0 finish INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.127714966000E+03 pt_gtg attribute will be added and kept. Sink point Points searched Points Found Percent Done 1188 1188 1188 5 % 2375 2375 2375 10 % 3562 3562 3562 15 % 4749 4749 4749 20 % 5936 5936 5936 25 % 7123 7123 7123 30 % 8310 8310 8310 35 % 9497 9497 9497 40 % 10684 10684 10684 45 % 11871 11871 11871 50 % 13058 13058 13058 55 % 14245 14245 14245 60 % 15432 15432 15432 65 % 16619 16619 16619 70 % 17806 17806 17806 75 % 18993 18993 18993 80 % 20180 20180 20180 85 % 21367 21367 21367 90 % 22554 22554 22554 95 % 23730 23730 23730 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/yobj_tmp_var/1 0 0/mo_cpts/yic/keepatt nodes in indexed point set = 23730 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.112220000000E+03 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1188 1188 1188 5 % 2375 2375 2375 10 % 3562 3562 3562 15 % 4749 4749 4749 20 % 5936 5936 5936 25 % 7123 7123 7123 30 % 8310 8310 8310 35 % 9497 9497 9497 40 % 10684 10684 10684 45 % 11871 11871 11871 50 % 13058 13058 13058 55 % 14245 14245 14245 60 % 15432 15432 15432 65 % 16619 16619 16619 70 % 17806 17806 17806 75 % 18993 18993 18993 80 % 20180 20180 20180 85 % 21367 21367 21367 90 % 22554 22554 22554 95 % 23730 23730 23730 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/zobj_tmp_var/1 0 0/mo_cpts/zic nodes in indexed point set = 23730 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.100000000000E+01 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1188 1188 1188 5 % 2375 2375 2375 10 % 3562 3562 3562 15 % 4749 4749 4749 20 % 5936 5936 5936 25 % 7123 7123 7123 30 % 8310 8310 8310 35 % 9497 9497 9497 40 % 10684 10684 10684 45 % 11871 11871 11871 50 % 13058 13058 13058 55 % 14245 14245 14245 60 % 15432 15432 15432 65 % 16619 16619 16619 70 % 17806 17806 17806 75 % 18993 18993 18993 80 % 20180 20180 20180 85 % 21367 21367 21367 90 % 22554 22554 22554 95 % 23730 23730 23730 Total cmo DELATT mo_tmp/pt_gtg finish cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/xic/mo_tmp/xobj_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/yic/mo_tmp/yobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/zic/mo_tmp/zobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/xdist/0.5 finish cmo/delatt/mo_tmp/temp_tmp_var finish cmo/delatt/mo_tmp/xobj_tmp_var finish cmo/delatt/mo_tmp/yobj_tmp_var finish cmo/delatt/mo_tmp/zobj_tmp_var finish COMPUTE distance_field: Done. cmo copyatt/mo_tmp mo_tmp/zic zicsave 23730 copied from mo_tmp zicsave to -> mo_tmp zic dump gmv tmp.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish pset/ptop attribute layertyp/1,0,0/eq -2 THE PSET ptop HAS 2505 POINTS pset p10 attribute xdist/pset,get,ptop lt .001 THE PSET p10 HAS 5 POINTS cmo setatt mo_tmp layertyp pset,get,p10 SS_C_SIDE 5 values reset for attribute layertyp eltset/e_tc/inclusive pset,get,p10 THE ELTSET e_tc HAS 20 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc SS_C_SIDE 20 values reset for attribute bc_faces eltset/e_top/id_side/eq 2 THE ELTSET e_top HAS 4864 ELEMENTS eltset e_tc_top inter e_top e_tc THE ELTSET e_tc_top HAS 10 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc_top SS_C_TOP 10 values reset for attribute bc_faces dump gmv tmp_bc_sides.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_SIDE cmo copy mo_tmp2 mo_tmp cmo select mo_tmp2 eltset/e_keep/bc_faces/eq/SS_C_SIDE THE ELTSET e_keep HAS 10 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28582 ELEMENTS rmpoint/element/eltset get e_delete Dudded 23700 points plus parents, and 28582 elements removed. rmpoint/compress 23700 points removed and 0 elements removed. The new point count is 30. The new element count is 10. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp2/itetclr0 cmo/DELATT/mo_tmp2/idnode0 cmo/DELATT/mo_tmp2/idelem0 cmo/DELATT/mo_tmp2/facecol cmo/DELATT/mo_tmp2/itetclr1 cmo/DELATT/mo_tmp2/idface0 cmo/DELATT/mo_tmp2/id_side cmo/DELATT/mo_tmp2/layertyp cmo/DELATT/mo_tmp2/bc_faces dump/avs2/FILE_C_SIDE/mo_tmp2/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_TOP cmo select mo_tmp eltset/e_keep/bc_faces/eq/SS_C_TOP THE ELTSET e_keep HAS 10 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 28582 ELEMENTS rmpoint/element/eltset get e_delete Dudded 23710 points plus parents, and 28582 elements removed. rmpoint/compress 23710 points removed and 0 elements removed. The new point count is 20. The new element count is 10. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp cmo/DELATT/mo_tmp/bc_faces dump/avs2/FILE_C_TOP/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish # clean up cmo/delete/mo_tmp Released Mesh Object: mo_tmp cmo/delete/mo_tmp2 Released Mesh Object: mo_tmp2 finish dump/exo/mesh_bc.exo/mo_pri///facesets fs_7_Csides.faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_bc.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 330660 number of elements: 637184 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 2 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_bc.exo using cmo: mo_pri ############################ # write some informational files and output dump/gmv/surf_sides.gmv/mo_surf cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_surf -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 23730 scalar 1 1 0 1 vector 3 3 0 1 nnodes 23730 23730 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 28592 28592 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 23730 ialias 0 0 0 23730 imt1 1 1 0 23730 itp1 0 2 2 23730 icr1 0 0 0 23730 isn1 0 0 0 23730 xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 23730 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 23730 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 23730 xtetwd 0 0 0 28592 itetclr 1 6 5 28592 itettyp 3 4 1 28592 itetoff 0 104636 104636 28592 jtetoff 0 104636 104636 28592 itet 0 23730 23730 28592x* jtet 0 285914 285914 28592x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 23730 23730 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 28592 itetclr1 1 30 29 28592 idnode0 1 330660 330659 23730 idelem0 0 0 0 28592 idelem1 1 637184 637183 28592 facecol 1 6 5 28592 idface0 0 0 0 28592 idface1 1 5 4 28592 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 23730 ielemclr 30 31 1 23730 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab id_side 1 6 5 28592 cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 330660 scalar 1 1 0 1 vector 3 3 0 1 nnodes 330660 330660 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 637184 637184 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 330660 ialias 0 0 0 330660 imt1 1 6 5 330660 itp1 0 10 10 330660 icr1 0 0 0 330660 isn1 0 0 0 330660 xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 330660 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 330660 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 330660 xtetwd 0 0 0 637184 itetclr 1 30 29 637184 itettyp 7 7 0 637184 itetoff 0 3823098 3823098 637184 jtetoff 0 3185915 3185915 637184 itet 1 330660 330659 637184x6 jtet 2 19185917 19185915 637184x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 1.348961727E-11 1.348961727E-11 0.000000000E+00 1 epsilona 8.195190071E-10 8.195190071E-10 0.000000000E+00 1 epsilonv 6.631176060E-09 6.631176060E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 330660 330660 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.003425751E+02 1.003425751E+02 0.000000000E+00 1 ymin 8.847044373E+01 8.847044373E+01 0.000000000E+00 1 zmin -4.500000000E+01 -4.500000000E+01 0.000000000E+00 1 xmax 1.267149658E+02 1.267149658E+02 0.000000000E+00 1 ymax 1.112200012E+02 1.112200012E+02 0.000000000E+00 1 zmax 4.776903629E+00 4.776903629E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 330660 ielemclr 30 31 1 330660 mat_orig 1 6 5 637184 ikey_utr 1 637184 637183 637184 cmo printatt mo_pri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 330660 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 330660 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 330660 cmo select mo_pri quality volume itetclr QUALITY TOTALS for 7 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 9728 ELEMENTS finish epsilonvol: 6.6311761E-09 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... element volumes b/w 0.3222E-03 and 0.4140E-03: 8 element volumes b/w 0.4140E-03 and 0.5319E-03: 174 element volumes b/w 0.5319E-03 and 0.6833E-03: 8005 element volumes b/w 0.6833E-03 and 0.8779E-03: 1429 element volumes b/w 0.8779E-03 and 0.1128E-02: 112 min volume = 3.2222597E-04 max volume = 1.1278859E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 43776 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... element volumes b/w 0.6445E-03 and 0.8280E-03: 36 element volumes b/w 0.8280E-03 and 0.1064E-02: 783 element volumes b/w 0.1064E-02 and 0.1367E-02: 36027 element volumes b/w 0.1367E-02 and 0.1756E-02: 6426 element volumes b/w 0.1756E-02 and 0.2256E-02: 504 min volume = 6.4446730E-04 max volume = 2.2557180E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/3/ THE ELTSET -etmp- HAS 43776 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 3 ........................... element volumes b/w 0.6445E-03 and 0.8280E-03: 36 element volumes b/w 0.8280E-03 and 0.1064E-02: 783 element volumes b/w 0.1064E-02 and 0.1367E-02: 36027 element volumes b/w 0.1367E-02 and 0.1756E-02: 6426 element volumes b/w 0.1756E-02 and 0.2256E-02: 504 min volume = 6.4446730E-04 max volume = 2.2557718E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/4/ THE ELTSET -etmp- HAS 29184 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 4 ........................... element volumes b/w 0.6445E-03 and 0.8280E-03: 24 element volumes b/w 0.8280E-03 and 0.1064E-02: 522 element volumes b/w 0.1064E-02 and 0.1367E-02: 24018 element volumes b/w 0.1367E-02 and 0.1756E-02: 4284 element volumes b/w 0.1756E-02 and 0.2256E-02: 336 min volume = 6.4446730E-04 max volume = 2.2557180E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/5/ THE ELTSET -etmp- HAS 69293 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 5 ........................... element volumes b/w 0.1107E-02 and 0.1254E-02: 320 element volumes b/w 0.1254E-02 and 0.1420E-02: 2237 element volumes b/w 0.1420E-02 and 0.1608E-02: 30762 element volumes b/w 0.1608E-02 and 0.1820E-02: 34516 element volumes b/w 0.1820E-02 and 0.2061E-02: 1458 min volume = 1.1072994E-03 max volume = 2.0610437E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/6/ THE ELTSET -etmp- HAS 395611 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 6 ........................... element volumes b/w 0.3222E-02 and 0.7516E-02: 216838 element volumes b/w 0.7516E-02 and 0.1753E-01: 8603 element volumes b/w 0.1753E-01 and 0.4089E-01: 48530 element volumes b/w 0.4089E-01 and 0.9538E-01: 48920 element volumes b/w 0.9538E-01 and 0.2225E+00: 72720 min volume = 3.2223365E-03 max volume = 2.2247684E-01 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/30/ THE ELTSET -etmp- HAS 45816 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 30 ........................... element volumes b/w 0.8056E-03 and 0.1366E-02: 1242 element volumes b/w 0.1366E-02 and 0.2315E-02: 26305 element volumes b/w 0.2315E-02 and 0.3925E-02: 464 element volumes b/w 0.3925E-02 and 0.6653E-02: 7941 element volumes b/w 0.6653E-02 and 0.1128E-01: 9864 min volume = 8.0558029E-04 max volume = 1.1278617E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for mo_pri 1 7 ........................................................... Color Num. Elements Volume Fractional Volume 1 9728 0.6351134E+01 0.000403110 2 43776 0.5716021E+02 0.003627988 3 43776 0.5716036E+02 0.003627998 4 29184 0.3810681E+02 0.002418659 5 69293 0.1112969E+03 0.007064073 6 395611 0.1531575E+05 0.972098894 30 45816 0.1695161E+03 0.010759277 Total elements: 637184 Total Volume: 0.1575534E+05 ----------------------------------------------------------- 637184 total elements evaluated. ############################ # write final mesh with multi material and all facesets # node imt does not seem to be included in exo files #dump / exo / mesh_fsets.exo / mo_pri / / / facesets & # fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset & # fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset & # fs_7_Csides.faceset fs_8_Ctop.faceset dump/exo/mesh_fsets.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3 _rig.faceset fs_4_bac.faceset fs_6_fro.faceset fs_7_Csides.faceset fs_8_Ctop.fac eset ExodusII: Start writing to file: mesh_fsets.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 330660 number of elements: 637184 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 7 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets.exo using cmo: mo_pri dump/avs2/mesh_fsets.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish ############################ # version with single material and top faceset only cmo setatt mo_pri itetclr 1 637184 values reset for attribute itetclr cmo setatt mo_pri imt 1 330660 values reset for attribute imt1 resetpts itp geniee finish #dump / exo / mesh_fsets_1mat.exo / mo_pri / / / facesets & # fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset & # fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset & # fs_7_Csides.faceset fs_8_Ctop.faceset dump/exo/mesh_fsets_1mat.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset fs_4_bac.faceset fs_6_fro.faceset fs_7_Csides.faceset fs_8_Cto p.faceset ExodusII: Start writing to file: mesh_fsets_1mat.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 330660 number of elements: 637184 number of edges: 0 number of edge blocks: 0 number of element blocks: 1 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 7 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets_1mat.exo using cmo: mo_pri dump/avs2/mesh_fsets_1mat.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets_1mat.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 330660 scalar 1 1 0 1 vector 3 3 0 1 nnodes 330660 330660 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 637184 637184 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 330660 ialias 0 0 0 330660 imt1 1 1 0 330660 itp1 0 10 10 330660 icr1 0 0 0 330660 isn1 0 0 0 330660 xic 1.003425751E+02 1.267149658E+02 2.637239075E+01 330660 yic 8.847044373E+01 1.112200012E+02 2.274955750E+01 330660 zic -4.500000000E+01 4.776903629E+00 4.977690363E+01 330660 xtetwd 0 0 0 637184 itetclr 1 1 0 637184 itettyp 7 7 0 637184 itetoff 0 3823098 3823098 637184 jtetoff 0 3185915 3185915 637184 itet 1 330660 330659 637184x6 jtet 1 16000000 15999999 637184x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 1.348961727E-11 1.348961727E-11 0.000000000E+00 1 epsilona 8.195190071E-10 8.195190071E-10 0.000000000E+00 1 epsilonv 6.631176060E-09 6.631176060E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 330660 330660 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.003425751E+02 1.003425751E+02 0.000000000E+00 1 ymin 8.847044373E+01 8.847044373E+01 0.000000000E+00 1 zmin -4.500000000E+01 -4.500000000E+01 0.000000000E+00 1 xmax 1.267149658E+02 1.267149658E+02 0.000000000E+00 1 ymax 1.112200012E+02 1.112200012E+02 0.000000000E+00 1 zmax 4.776903629E+00 4.776903629E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 330660 ielemclr 30 31 1 330660 mat_orig 1 6 5 637184 ikey_utr 1 637184 637183 637184 finish LaGriT successfully completed