* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Nov 6 12:15:31 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # read the file with the 3D polygon mesh # this is a triangle mesh stacked into prism elements # such that tri faces show top and bottom, quads on sides # itetclr materials have been defined, facesets have not read/proto_full_poly.inp/mo_pri read/avs/proto_full_poly.inp/mo_pri cmo/addatt/mo_pri/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/mat_orig/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ikey_utr/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 698148 number of elements = 1358208 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 25000000 status = active finish finish cmo status mo_pri The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 698148 number of elements = 1358208 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 25000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo agl 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 6.981E+05 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 1.358E+06 8 mbndry INT scalar scalar const perma l 2.500E+07 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 1.543E-11 35 epsilona REAL scalar scalar const perma l 1.072E-09 36 epsilonv REAL scalar scalar const perma l 1.150E-08 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 6.981E+05 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 1.030E+02 52 ymin REAL scalar scalar const perma l 1.235E+02 53 zmin REAL scalar scalar const perma l -4.500E+01 54 xmax REAL scalar scalar const perma l 1.445E+02 55 ymax REAL scalar scalar const perma l 1.486E+02 56 zmax REAL scalar scalar const perma l 4.733E+00 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VDOU scalar nnodes linea perma gxa 0.000E+00 67 ielemclr VINT scalar nnodes linea perma gxa 0.000E+00 68 mat_orig VINT scalar nelements linea perma gxa 0.000E+00 69 ikey_utr VINT scalar nelements linea perma gxa 0.000E+00 ## Extract the outside surface of the polygon mesh # The extracted surface will have the element and element face # that were extracted from the 3D mesh elements # attributes, idelem1 and idface1 are written to faceset files # with each file grouped into seperate faceset files #### IMPORTANT ################### # The cells MUST be pre-sorted by itetclr material values # Exodus will reorder elements internally, we do not want the # cells to be re-ordered. If they are, faceset correlation to # the cell numbers will no longer be correct. # Check that facesets are correct by reading the exo file into GMV # and selecting Surfaces under Display. #--------- BEFORE EXTRACT -------------------------------------- # sort based on itetclr values and cell location # secondary sort conventions are up to user # xmed, ymed, zmed will arrange into columns (after itetclr sort) createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo_pri/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo_pri/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey geniee finish dump/gmv/out_tmp_sort1.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo/DELATT/mo_pri/ikey # sort nodes based on mesh convention z, y, then x sort/mo_pri/index/ascending/ikey/zic yic xic cmo/addatt/mo_pri/ikey/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey dump gmv tmp_sort.gmv mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo_pri xmed cmo DELATT mo_pri ymed cmo DELATT mo_pri zmed cmo DELATT mo_pri ikey #---------------------------------------------------------------- extract/surfmesh/1 0 0/mo_surf/mo_pri/external cmo/addatt/mo_surf/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_surf/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/printatt/mo_surf/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 37618 scalar 1 1 0 1 vector 3 3 0 1 nnodes 37618 37618 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 47984 47984 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 37618 ialias 0 0 0 37618 imt1 1 1 0 37618 itp1 0 2 2 37618 icr1 0 0 0 37618 isn1 0 0 0 37618 xic 1.030189209E+02 1.445391388E+02 4.152021790E+01 37618 yic 1.234896774E+02 1.485746765E+02 2.508499908E+01 37618 zic -4.500000000E+01 4.733375072E+00 4.973337507E+01 37618 xtetwd 0 0 0 47984 itetclr 1 1 0 47984 itettyp 3 4 1 47984 itetoff 0 171196 171196 47984 jtetoff 0 171196 171196 47984 itet 0 37618 37618 47984x* jtet 0 479834 479834 47984x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 37618 37618 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 47984 itetclr1 1 30 29 47984 idnode0 1 698148 698147 37618 idelem0 0 0 0 47984 idelem1 1 1358208 1358207 47984 facecol 1 6 5 47984 idface0 0 0 0 47984 idface1 1 5 4 47984 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 37618 ielemclr 30 31 1 37618 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab ## Set surface elements to direction they face based on normals # These values will be written to itetclr, copy to id_side attribute # 1 = bottom # 2 = top # 3 = east right # 4 = north back # 5 = west left # 6 = south front cmo/addatt/mo_surf/id_side/vint/scalar/nelements cmo/select mo_surf settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 37616 out of 47984 element colors changed. cmo/copyatt/mo_surf mo_surf/id_side itetclr 47984 copied from mo_surf itetclr to -> mo_surf id_side cmo/printatt/mo_surf/id_side/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH id_side 1 6 5 47984 # this was previous convention, use settets convention instead. # so that top is now 2 and 1 is bottom, etc. # the settets convention is more widely used # cmo / setatt / mo_surf / id_side / eltset get etop / 1 # cmo / setatt / mo_surf / id_side / eltset get ebot / 2 # cmo / setatt / mo_surf / id_side / eltset get efro / 3 # cmo / setatt / mo_surf / id_side / eltset get ebac / 4 # cmo / setatt / mo_surf / id_side / eltset get elef / 5 # cmo / setatt / mo_surf / id_side / eltset get erig / 6 define/FILENAME/fs_3_rig.faceset define/SS_ID/3 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 4192 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 43792 ELEMENTS rmpoint/element/eltset get e_delete Dudded 33262 points plus parents, and 43792 elements removed. rmpoint/compress 33262 points removed and 0 elements removed. The new point count is 4356. The new element count is 4192. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_4_bac.faceset define/SS_ID/4 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 12576 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 35408 ELEMENTS rmpoint/element/eltset get e_delete Dudded 24814 points plus parents, and 35408 elements removed. rmpoint/compress 24814 points removed and 0 elements removed. The new point count is 12804. The new element count is 12576. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_5_lef.faceset define/SS_ID/5 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 2096 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 45888 ELEMENTS rmpoint/element/eltset get e_delete Dudded 35374 points plus parents, and 45888 elements removed. rmpoint/compress 35374 points removed and 0 elements removed. The new point count is 2244. The new element count is 2096. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_6_fro.faceset define/SS_ID/6 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 8384 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 39600 ELEMENTS rmpoint/element/eltset get e_delete Dudded 29038 points plus parents, and 39600 elements removed. rmpoint/compress 29038 points removed and 0 elements removed. The new point count is 8580. The new element count is 8384. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_1_bot.faceset define/SS_ID/1 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 10368 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 37616 ELEMENTS rmpoint/element/eltset get e_delete Dudded 32329 points plus parents, and 37616 elements removed. rmpoint/compress 32329 points removed and 0 elements removed. The new point count is 5289. The new element count is 10368. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_2_top.faceset define/SS_ID/2 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 10368 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 37616 ELEMENTS rmpoint/element/eltset get e_delete Dudded 32329 points plus parents, and 37616 elements removed. rmpoint/compress 32329 points removed and 0 elements removed. The new point count is 5289. The new element count is 10368. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish #---------------------------------------------------------------- ## CHECK that top number of faces = bottom = layer # this version layer has number of elements = 6272 #---------------------------------------------------------------- ######################## Add Top Corners Section ################ # Find facesets at top corners for Boundary Conditions # Using x,y points of the input polygons (before triangulation) # Points are found on outside surface of full mesh, no internal nodes # Write exodus file to check corner point facesets # fs_7_Csides.faceset and fs_8_Ctop.faceset # (exodus assigns side set id based on file count) define FPOLY_PTS boundary_points.inp infile bc_corner_faceset.mlgi # MUST DEFINE INPUT FILE FPOLY_PTS # output files and SS ID NUMBERS define SS_C_SIDE 7 define SS_C_TOP 8 define FILE_C_SIDE fs_7_Csides.faceset define FILE_C_TOP fs_8_Ctop.faceset # find and set top corner pts and facesets # use attribute layertyp = -2 from stack command # set top corner point faces (side) = SS_C_SIDE # set top corner point faces (top) = SS_C_TOP read avs FPOLY_PTS mo_cpts cmo/status/brief The current-mesh-object(CMO) is: mo_cpts 1 Mesh Object name: mo_pri number of nodes = 698148 number of elements = 1358208 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 25000000 status = inactive 2 Mesh Object name: mo_surf number of nodes = 37618 number of elements = 47984 dimensions geometry = 3 element type = hyb dimensions topology = 2 10 nodes 10 faces 12 edges boundary flag = 16000000 status = inactive 3 Mesh Object name: mo_cpts number of nodes = 7 number of elements = 0 dimensions geometry = 3 element type = tet dimensions topology = 3 4 nodes 4 faces 6 edges boundary flag = 16000000 status = active finish # CHECK input poly points # zic should be 0, or set to 0 here cmo/printatt/mo_cpts/-xyz- minmax Warning: nelements = 0 ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.030189210E+02 1.445391350E+02 4.152021400E+01 7 yic 1.234896800E+02 1.485746700E+02 2.508499000E+01 7 zic 0.000000000E+00 0.000000000E+00 0.000000000E+00 7 cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp cmo/addatt/mo_tmp/bc_faces/vint/scalar/nelements ########################## # Find the top points 0 distance from poly corner points cmo addatt mo_tmp zicsave VDOUBLE/scalar/nnodes cmo copyatt mo_tmp mo_tmp zicsave zic 37618 copied from mo_tmp zic to -> mo_tmp zicsave cmo setatt mo_tmp zic 0. 37618 values reset for attribute zic compute/distance_field/mo_tmp/mo_cpts/xdist cmo/addatt/mo_tmp/temp_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/yobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/zobj_tmp_var/VDOUBLE/scalar/nnodes/linear/temporary//-1.0 finish cmo/addatt/mo_tmp/xdist/VDOUBLE/scalar/nnodes/linear/permanent//-1.0 finish interpolate/voronoi/mo_tmp/xobj_tmp_var/1 0 0/mo_cpts/xic/keepatt nodes in indexed point set = 37618 cmo/addatt/mo_tmp/pt_gtg/VINT/scalar/nnodes//permanent/agfx/0 finish INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.145539135000E+03 pt_gtg attribute will be added and kept. Sink point Points searched Points Found Percent Done 1882 1882 1882 5 % 3763 3763 3763 10 % 5644 5644 5644 15 % 7525 7525 7525 20 % 9406 9406 9406 25 % 11287 11287 11287 30 % 13168 13168 13168 35 % 15049 15049 15049 40 % 16930 16930 16930 45 % 18811 18811 18811 50 % 20692 20692 20692 55 % 22573 22573 22573 60 % 24454 24454 24454 65 % 26335 26335 26335 70 % 28216 28216 28216 75 % 30097 30097 30097 80 % 31978 31978 31978 85 % 33859 33859 33859 90 % 35740 35740 35740 95 % 37618 37618 37618 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/yobj_tmp_var/1 0 0/mo_cpts/yic/keepatt nodes in indexed point set = 37618 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.149574670000E+03 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1882 1882 1882 5 % 3763 3763 3763 10 % 5644 5644 5644 15 % 7525 7525 7525 20 % 9406 9406 9406 25 % 11287 11287 11287 30 % 13168 13168 13168 35 % 15049 15049 15049 40 % 16930 16930 16930 45 % 18811 18811 18811 50 % 20692 20692 20692 55 % 22573 22573 22573 60 % 24454 24454 24454 65 % 26335 26335 26335 70 % 28216 28216 28216 75 % 30097 30097 30097 80 % 31978 31978 31978 85 % 33859 33859 33859 90 % 35740 35740 35740 95 % 37618 37618 37618 Total cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish interpolate/voronoi/mo_tmp/zobj_tmp_var/1 0 0/mo_cpts/zic nodes in indexed point set = 37618 INTRP METHOD: voronoi FUNCTION: linear TIEBREAKER: maxtie FLAG: plus1 0.100000000000E+01 SKIPPING POINT SEARCH... using lookup attribute pt_gtg Sink point Points searched Points Found Percent Done 1882 1882 1882 5 % 3763 3763 3763 10 % 5644 5644 5644 15 % 7525 7525 7525 20 % 9406 9406 9406 25 % 11287 11287 11287 30 % 13168 13168 13168 35 % 15049 15049 15049 40 % 16930 16930 16930 45 % 18811 18811 18811 50 % 20692 20692 20692 55 % 22573 22573 22573 60 % 24454 24454 24454 65 % 26335 26335 26335 70 % 28216 28216 28216 75 % 30097 30097 30097 80 % 31978 31978 31978 85 % 33859 33859 33859 90 % 35740 35740 35740 95 % 37618 37618 37618 Total cmo DELATT mo_tmp/pt_gtg finish cmo select mo_tmp finish intrp/voronoi done. cmo kdtree release finish finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/xic/mo_tmp/xobj_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/yic/mo_tmp/yobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/sub/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/zic/mo_tmp/zobj_tmp_var finish math/power/mo_tmp/temp_tmp_var/1,0,0/mo_tmp/temp_tmp_var/2.0 finish math/add/mo_tmp/xdist/1 0 0/mo_tmp/xdist/mo_tmp/temp_tmp_var finish math/power/mo_tmp/xdist/1,0,0/mo_tmp/xdist/0.5 finish cmo/delatt/mo_tmp/temp_tmp_var finish cmo/delatt/mo_tmp/xobj_tmp_var finish cmo/delatt/mo_tmp/yobj_tmp_var finish cmo/delatt/mo_tmp/zobj_tmp_var finish COMPUTE distance_field: Done. cmo copyatt/mo_tmp mo_tmp/zic zicsave 37618 copied from mo_tmp zicsave to -> mo_tmp zic dump gmv tmp.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish pset/ptop attribute layertyp/1,0,0/eq -2 THE PSET ptop HAS 5289 POINTS pset p10 attribute xdist/pset,get,ptop lt .001 THE PSET p10 HAS 7 POINTS cmo setatt mo_tmp layertyp pset,get,p10 SS_C_SIDE 7 values reset for attribute layertyp eltset/e_tc/inclusive pset,get,p10 THE ELTSET e_tc HAS 33 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc SS_C_SIDE 33 values reset for attribute bc_faces eltset/e_top/id_side/eq 2 THE ELTSET e_top HAS 10368 ELEMENTS eltset e_tc_top inter e_top e_tc THE ELTSET e_tc_top HAS 19 ELEMENTS cmo setatt mo_tmp bc_faces eltset,get,e_tc_top SS_C_TOP 19 values reset for attribute bc_faces dump gmv tmp_bc_sides.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_SIDE cmo copy mo_tmp2 mo_tmp cmo select mo_tmp2 eltset/e_keep/bc_faces/eq/SS_C_SIDE THE ELTSET e_keep HAS 14 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 47970 ELEMENTS rmpoint/element/eltset get e_delete Dudded 37576 points plus parents, and 47970 elements removed. rmpoint/compress 37576 points removed and 0 elements removed. The new point count is 42. The new element count is 14. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp2/itetclr0 cmo/DELATT/mo_tmp2/idnode0 cmo/DELATT/mo_tmp2/idelem0 cmo/DELATT/mo_tmp2/facecol cmo/DELATT/mo_tmp2/itetclr1 cmo/DELATT/mo_tmp2/idface0 cmo/DELATT/mo_tmp2/id_side cmo/DELATT/mo_tmp2/layertyp cmo/DELATT/mo_tmp2/bc_faces dump/avs2/FILE_C_SIDE/mo_tmp2/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish ########################## # Write the faceset faces and elements for id SS_C_TOP cmo select mo_tmp eltset/e_keep/bc_faces/eq/SS_C_TOP THE ELTSET e_keep HAS 19 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 47965 ELEMENTS rmpoint/element/eltset get e_delete Dudded 37585 points plus parents, and 47965 elements removed. rmpoint/compress 37585 points removed and 0 elements removed. The new point count is 33. The new element count is 19. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp cmo/DELATT/mo_tmp/bc_faces dump/avs2/FILE_C_TOP/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish # clean up cmo/delete/mo_tmp Released Mesh Object: mo_tmp cmo/delete/mo_tmp2 Released Mesh Object: mo_tmp2 finish dump/exo/mesh_bc.exo/mo_pri///facesets fs_7_Csides.faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_bc.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 698148 number of elements: 1358208 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 2 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_bc.exo using cmo: mo_pri ############################ # write some informational files and output dump/gmv/surf_sides.gmv/mo_surf cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_surf -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 37618 scalar 1 1 0 1 vector 3 3 0 1 nnodes 37618 37618 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 47984 47984 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 37618 ialias 0 0 0 37618 imt1 1 1 0 37618 itp1 0 2 2 37618 icr1 0 0 0 37618 isn1 0 0 0 37618 xic 1.030189209E+02 1.445391388E+02 4.152021790E+01 37618 yic 1.234896774E+02 1.485746765E+02 2.508499908E+01 37618 zic -4.500000000E+01 4.733375072E+00 4.973337507E+01 37618 xtetwd 0 0 0 47984 itetclr 1 6 5 47984 itettyp 3 4 1 47984 itetoff 0 171196 171196 47984 jtetoff 0 171196 171196 47984 itet 0 37618 37618 47984x* jtet 0 479834 479834 47984x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 37618 37618 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 47984 itetclr1 1 30 29 47984 idnode0 1 698148 698147 37618 idelem0 0 0 0 47984 idelem1 1 1358208 1358207 47984 facecol 1 6 5 47984 idface0 0 0 0 47984 idface1 1 5 4 47984 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 37618 ielemclr 30 31 1 37618 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab id_side 1 6 5 47984 cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 698148 scalar 1 1 0 1 vector 3 3 0 1 nnodes 698148 698148 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1358208 1358208 0 1 mbndry 25000000 25000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 698148 ialias 0 0 0 698148 imt1 1 6 5 698148 itp1 0 10 10 698148 icr1 0 0 0 698148 isn1 0 0 0 698148 xic 1.030189209E+02 1.445391388E+02 4.152021790E+01 698148 yic 1.234896774E+02 1.485746765E+02 2.508499908E+01 698148 zic -4.500000000E+01 4.733375072E+00 4.973337507E+01 698148 xtetwd 0 0 0 1358208 itetclr 1 30 29 1358208 itettyp 7 7 0 1358208 itetoff 0 8149242 8149242 1358208 jtetoff 0 6791035 6791035 1358208 itet 1 698148 698147 1358208x6 jtet 2 31791037 31791035 1358208x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 1.542625911E-11 1.542625911E-11 0.000000000E+00 1 epsilona 1.071719218E-09 1.071719218E-09 0.000000000E+00 1 epsilonv 1.150169566E-08 1.150169566E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 698148 698148 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.030189209E+02 1.030189209E+02 0.000000000E+00 1 ymin 1.234896774E+02 1.234896774E+02 0.000000000E+00 1 zmin -4.500000000E+01 -4.500000000E+01 0.000000000E+00 1 xmax 1.445391388E+02 1.445391388E+02 0.000000000E+00 1 ymax 1.485746765E+02 1.485746765E+02 0.000000000E+00 1 zmax 4.733375072E+00 4.733375072E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 698148 ielemclr 30 31 1 698148 mat_orig 1 6 5 1358208 ikey_utr 1 1358208 1358207 1358208 cmo printatt mo_pri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 1.030189209E+02 1.445391388E+02 4.152021790E+01 698148 yic 1.234896774E+02 1.485746765E+02 2.508499908E+01 698148 zic -4.500000000E+01 4.733375072E+00 4.973337507E+01 698148 cmo select mo_pri quality volume itetclr QUALITY TOTALS for 7 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 20736 ELEMENTS finish epsilonvol: 1.1501696E-08 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... element volumes b/w 0.3695E-03 and 0.5007E-03: 1772 element volumes b/w 0.5007E-03 and 0.6786E-03: 14242 element volumes b/w 0.6786E-03 and 0.9196E-03: 4538 element volumes b/w 0.9196E-03 and 0.1246E-02: 174 element volumes b/w 0.1246E-02 and 0.1689E-02: 10 min volume = 3.6947025E-04 max volume = 1.6890650E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 93312 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... element volumes b/w 0.7390E-03 and 0.1001E-02: 7974 element volumes b/w 0.1001E-02 and 0.1357E-02: 64089 element volumes b/w 0.1357E-02 and 0.1839E-02: 20421 element volumes b/w 0.1839E-02 and 0.2493E-02: 783 element volumes b/w 0.2493E-02 and 0.3378E-02: 45 min volume = 7.3895812E-04 max volume = 3.3780496E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/3/ THE ELTSET -etmp- HAS 93312 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 3 ........................... element volumes b/w 0.7390E-03 and 0.1001E-02: 7974 element volumes b/w 0.1001E-02 and 0.1357E-02: 64089 element volumes b/w 0.1357E-02 and 0.1839E-02: 20421 element volumes b/w 0.1839E-02 and 0.2493E-02: 783 element volumes b/w 0.2493E-02 and 0.3378E-02: 45 min volume = 7.3895812E-04 max volume = 3.3781301E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/4/ THE ELTSET -etmp- HAS 62208 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 4 ........................... element volumes b/w 0.7390E-03 and 0.1001E-02: 5316 element volumes b/w 0.1001E-02 and 0.1357E-02: 42726 element volumes b/w 0.1357E-02 and 0.1839E-02: 13614 element volumes b/w 0.1839E-02 and 0.2493E-02: 522 element volumes b/w 0.2493E-02 and 0.3378E-02: 30 min volume = 7.3895812E-04 max volume = 3.3780496E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/5/ THE ELTSET -etmp- HAS 161093 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 5 ........................... element volumes b/w 0.9237E-03 and 0.1122E-02: 3260 element volumes b/w 0.1122E-02 and 0.1362E-02: 48576 element volumes b/w 0.1362E-02 and 0.1654E-02: 68162 element volumes b/w 0.1654E-02 and 0.2009E-02: 39686 element volumes b/w 0.2009E-02 and 0.2439E-02: 1409 min volume = 9.2369324E-04 max volume = 2.4392336E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/6/ THE ELTSET -etmp- HAS 852972 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 6 ........................... element volumes b/w 0.3695E-02 and 0.9082E-02: 486579 element volumes b/w 0.9082E-02 and 0.2233E-01: 44253 element volumes b/w 0.2233E-01 and 0.5488E-01: 99210 element volumes b/w 0.5488E-01 and 0.1349E+00: 190470 element volumes b/w 0.1349E+00 and 0.3316E+00: 32460 min volume = 3.6947906E-03 max volume = 3.3163964E-01 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/30/ THE ELTSET -etmp- HAS 74575 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 30 ........................... element volumes b/w 0.1107E-02 and 0.1909E-02: 35790 element volumes b/w 0.1909E-02 and 0.3293E-02: 10417 element volumes b/w 0.3293E-02 and 0.5679E-02: 10770 element volumes b/w 0.5679E-02 and 0.9794E-02: 16635 element volumes b/w 0.9794E-02 and 0.1689E-01: 963 min volume = 1.1071967E-03 max volume = 1.6890288E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for mo_pri 1 7 ........................................................... Color Num. Elements Volume Fractional Volume 1 20736 0.1262622E+02 0.000403803 2 93312 0.1136360E+03 0.003634225 3 93312 0.1136363E+03 0.003634234 4 62208 0.7575732E+02 0.002422816 5 161093 0.2407635E+03 0.007699926 6 852972 0.3044918E+05 0.973804046 30 74575 0.2626833E+03 0.008400950 Total elements: 1358208 Total Volume: 0.3126829E+05 ----------------------------------------------------------- 1358208 total elements evaluated. ############################ # write final mesh with multi material and all facesets # node imt does not seem to be included in exo files dump/exo/mesh_fsets.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3 _rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset fs_7_Csides.face set fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_fsets.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 698148 number of elements: 1358208 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 8 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets.exo using cmo: mo_pri dump/avs2/mesh_fsets.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish ############################ # version with single material and top faceset only cmo setatt mo_pri itetclr 1 1358208 values reset for attribute itetclr cmo setatt mo_pri imt 1 698148 values reset for attribute imt1 resetpts itp geniee finish dump/exo/mesh_fsets_1mat.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset fs_7_Csides .faceset fs_8_Ctop.faceset ExodusII: Start writing to file: mesh_fsets_1mat.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 698148 number of elements: 1358208 number of edges: 0 number of edge blocks: 0 number of element blocks: 1 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 8 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets_1mat.exo using cmo: mo_pri dump/avs2/mesh_fsets_1mat.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets_1mat.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 698148 scalar 1 1 0 1 vector 3 3 0 1 nnodes 698148 698148 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 1358208 1358208 0 1 mbndry 25000000 25000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 698148 ialias 0 0 0 698148 imt1 1 1 0 698148 itp1 0 10 10 698148 icr1 0 0 0 698148 isn1 0 0 0 698148 xic 1.030189209E+02 1.445391388E+02 4.152021790E+01 698148 yic 1.234896774E+02 1.485746765E+02 2.508499908E+01 698148 zic -4.500000000E+01 4.733375072E+00 4.973337507E+01 698148 xtetwd 0 0 0 1358208 itetclr 1 1 0 1358208 itettyp 7 7 0 1358208 itetoff 0 8149242 8149242 1358208 jtetoff 0 6791035 6791035 1358208 itet 1 698148 698147 1358208x6 jtet 1 25000000 24999999 1358208x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 1.542625911E-11 1.542625911E-11 0.000000000E+00 1 epsilona 1.071719218E-09 1.071719218E-09 0.000000000E+00 1 epsilonv 1.150169566E-08 1.150169566E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 698148 698148 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 1.030189209E+02 1.030189209E+02 0.000000000E+00 1 ymin 1.234896774E+02 1.234896774E+02 0.000000000E+00 1 zmin -4.500000000E+01 -4.500000000E+01 0.000000000E+00 1 xmax 1.445391388E+02 1.445391388E+02 0.000000000E+00 1 ymax 1.485746765E+02 1.485746765E+02 0.000000000E+00 1 zmax 4.733375072E+00 4.733375072E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 698148 ielemclr 30 31 1 698148 mat_orig 1 6 5 1358208 ikey_utr 1 1358208 1358207 1358208 finish LaGriT successfully completed