* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Program: LaGriT V3.101 Linux m64 * * * date_compile: 2013/04/25 RH gf4.5 * * * Run Time: 2013/Jul 2 17:18:55 * * * Manual: http://lagrit.lanl.gov * * * * * * * * * * * * * * * * * * * * * * * * * * * * * -----oOo----- LaGriT V3 LACC-2012-084 LaGriT Copyright: This program was prepared by Los Alamos National Security, LLC at Los Alamos National Laboratory (LANL) under contract No. DE-AC52-06NA25396 with the U.S. Department of Energy (DOE). All rights in the program are reserved by the DOE and Los Alamos National Security, LLC. Permission is granted to the public to copy and use this software without charge, provided that this Notice and any statement of authorship are reproduced on all copies. Neither the U.S. Government nor LANS makes any warranty, express or implied, or assumes any liability or responsibility for the use of this software. -----oOo----- Output log file: outx3dgen Command log file: logx3dgen # read the file with the 3D polygon mesh # this is a triangle mesh stacked into prism elements # such that tri faces show top and bottom, quads on sides # itetclr materials have been defined, facesets have not read/proto_full_poly.inp/mo_pri read/avs/proto_full_poly.inp/mo_pri cmo/addatt/mo_pri/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/mat_orig/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish cmo/addatt/mo_pri/ikey_utr/VINT/scalar/nelements/linear/permanent/gxaf/0.0 finish geniee finish cmo/status/brief The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 16970053 number of elements = 33441792 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 610000000 status = active finish finish cmo status mo_pri The current-mesh-object(CMO) is: mo_pri 1 Mesh Object name: mo_pri number of nodes = 16970053 number of elements = 33441792 dimensions geometry = 3 element type = pri dimensions topology = 3 6 nodes 5 faces 9 edges boundary flag = 610000000 status = active NAME TYPE RANK LENGTH INTER PERSI IO VALUE 1 -def- VDOU scalar nnodes linea tempo agl 0.000E+00 2 scalar INT scalar scalar const perma l 1.000E+00 3 vector INT scalar scalar const perma l 3.000E+00 4 nnodes INT scalar scalar const perma l 1.697E+07 5 nedges INT scalar scalar const perma l 0.000E+00 6 nfaces INT scalar scalar const perma l 0.000E+00 7 nelements INT scalar scalar const perma l 3.344E+07 8 mbndry INT scalar scalar const perma l 6.100E+08 9 ndimensions_top INT scalar scalar const perma l 3.000E+00 10 ndimensions_geo INT scalar scalar const perma l 3.000E+00 11 nodes_per_eleme INT scalar scalar const perma l 6.000E+00 12 edges_per_eleme INT scalar scalar const perma l 9.000E+00 13 faces_per_eleme INT scalar scalar const perma l 5.000E+00 14 isetwd VDOU scalar nnodes or perma l 0.000E+00 15 ialias VINT scalar nnodes seque perma l 0.000E+00 16 imt1 VINT scalar nnodes max perma gal 0.000E+00 17 itp1 VINT scalar nnodes min perma gal 0.000E+00 18 icr1 VINT scalar nnodes min perma gal 0.000E+00 19 isn1 VINT scalar nnodes user perma gal 0.000E+00 20 xic VDOU scalar nnodes linea perma l 0.000E+00 21 yic VDOU scalar nnodes linea perma l 0.000E+00 22 zic VDOU scalar nnodes linea perma l 0.000E+00 23 xtetwd VDOU scalar nelements or perma l 0.000E+00 24 itetclr VINT scalar nelements user perma l 0.000E+00 25 itettyp VINT scalar nelements user perma l 0.000E+00 26 itetoff VINT scalar nelements user perma l 0.000E+00 27 jtetoff VINT scalar nelements user perma l 0.000E+00 28 itet VINT nodes_per_ nelements user perma l 0.000E+00 29 jtet VINT faces_per_ nelements user perma l 0.000E+00 30 ipolydat CHAR scalar scalar const perma l yes 31 vor2d CHAR scalar scalar const perma l yes 32 vor3d CHAR scalar scalar const perma l no 33 epsilon REAL scalar scalar const perma l 1.000E-15 34 epsilonl REAL scalar scalar const perma l 5.214E-11 35 epsilona REAL scalar scalar const perma l 1.224E-08 36 epsilonv REAL scalar scalar const perma l 3.654E-08 37 ipointi INT scalar scalar const perma l 1.000E+00 38 ipointj INT scalar scalar const perma l 1.697E+07 39 idebug INT scalar scalar const perma l 0.000E+00 40 itypconv_sm INT scalar scalar const perma l 1.000E+00 41 maxiter_sm INT scalar scalar const perma l 2.500E+01 42 tolconv_sm REAL scalar scalar const perma l 1.000E+00 43 nnfreq INT scalar scalar const perma l 1.000E+00 44 ivoronoi INT scalar scalar const perma l 1.000E+00 45 iopt2to2 INT scalar scalar const perma l 2.000E+00 46 dumptype CHAR scalar scalar const perma l binary 47 velname CHAR scalar scalar const perma l vels 48 densname CHAR scalar scalar const perma l ric 49 presname CHAR scalar scalar const perma l pic 50 enername CHAR scalar scalar const perma l eic 51 xmin REAL scalar scalar const perma l 4.459E+01 52 ymin REAL scalar scalar const perma l 4.240E+01 53 zmin REAL scalar scalar const perma l -1.000E+00 54 xmax REAL scalar scalar const perma l 2.181E+02 55 ymax REAL scalar scalar const perma l 2.005E+02 56 zmax REAL scalar scalar const perma l 4.998E+00 57 kdtree_level INT scalar scalar const perma l 0.000E+00 58 max_number_sets INT scalar scalar const perma l 6.400E+01 59 number_of_psets INT scalar scalar const perma l 0.000E+00 60 number_of_eltse INT scalar scalar const perma l 0.000E+00 61 psetnames VCHA scalar max_number_sets const perma l 62 eltsetnames VCHA scalar max_number_sets const perma l 63 geom_name CHAR scalar max_number_sets const perma l -defaultge 64 fsetnames VCHA scalar max_number_sets const perma l 65 number_of_fsets INT scalar scalar const perma l 0.000E+00 66 layertyp VDOU scalar nnodes linea perma gxa 0.000E+00 67 ielemclr VINT scalar nnodes linea perma gxa 0.000E+00 68 mat_orig VINT scalar nelements linea perma gxa 0.000E+00 69 ikey_utr VINT scalar nelements linea perma gxa 0.000E+00 ## Extract the outside surface of the polygon mesh # The extracted surface will have the element and element face # that were extracted from the 3D mesh elements # attributes, idelem1 and idface1 are written to faceset files # with each file grouped into seperate faceset files #### IMPORTANT ################### # The cells MUST be pre-sorted by itetclr material values # Exodus will reorder elements internally, we do not want the # cells to be re-ordered. If they are, faceset correlation to # the cell numbers will no longer be correct. # Check that facesets are correct by reading the exo file into GMV # and selecting Surfaces under Display. #--------- BEFORE EXTRACT -------------------------------------- # sort based on itetclr values and cell location # secondary sort conventions are up to user # xmed, ymed, zmed will arrange into columns (after itetclr sort) createpts/median cmo/addatt//xmed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//ymed/VDOUBLE/scalar/nelements///gal/0. finish cmo/addatt//zmed/VDOUBLE/scalar/nelements///gal/0. finish sort/mo_pri/index/ascending/ikey/itetclr xmed ymed zmed cmo/addatt/mo_pri/ikey/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey geniee finish dump/gmv/out_tmp_sort1.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo/DELATT/mo_pri/ikey # sort nodes based on mesh convention z, y, then x sort/mo_pri/index/ascending/ikey/zic yic xic cmo/addatt/mo_pri/ikey/vint/scalar/nnodes///gax/0 finish SORT: order key written to attribute: ikey reorder/mo_pri/ikey dump gmv tmp_sort.gmv mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo DELATT mo_pri xmed cmo DELATT mo_pri ymed cmo DELATT mo_pri zmed cmo DELATT mo_pri ikey #---------------------------------------------------------------- extract/surfmesh/1 0 0/mo_surf/mo_pri/external cmo/addatt/mo_surf/itetclr0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/itetclr1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idnode0/vint/scalar/nnodes////0 finish cmo/addatt/mo_surf/idelem0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idelem1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/facecol/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface0/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/idface1/vint/scalar/nelements////0 finish cmo/addatt/mo_surf/layertyp/VDOUBLE/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ielemclr/VINT/scalar/nnodes/linear/permanent/gxaf finish cmo/addatt/mo_surf/ncon50/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/nconbnd/int/scalar/scalar/constant/permanent/x/0 finish cmo/addatt/mo_surf/icontab/vint/scalar/ncon50/constant/permanent/x/0 finish resetpts/itp geniee finish finish cmo/printatt/mo_surf/-all-/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 496578 scalar 1 1 0 1 vector 3 3 0 1 nnodes 496578 496578 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 844928 844928 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 496578 ialias 0 0 0 496578 imt1 1 1 0 496578 itp1 0 2 2 496578 icr1 0 0 0 496578 isn1 0 0 0 496578 xic 4.459000015E+01 2.180899963E+02 1.734999962E+02 496578 yic 4.240127182E+01 2.005397644E+02 1.581384926E+02 496578 zic -1.000000000E+00 4.997776985E+00 5.997776985E+00 496578 xtetwd 0 0 0 844928 itetclr 1 1 0 844928 itettyp 3 4 1 844928 itetoff 0 2683004 2683004 844928 jtetoff 0 2683004 2683004 844928 itet 0 496578 496578 844928x* jtet 0 8449274 8449274 844928x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 496578 496578 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 844928 itetclr1 1 30 29 844928 idnode0 1 16970053 16970052 496578 idelem0 0 0 0 844928 idelem1 1 33441792 33441791 844928 facecol 1 6 5 844928 idface0 0 0 0 844928 idface1 1 5 4 844928 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 496578 ielemclr 30 31 1 496578 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab ## Set surface elements to direction they face based on normals # These values will be written to itetclr, copy to id_side attribute # 1 = bottom # 2 = top # 3 = east right # 4 = north back # 5 = west left # 6 = south front cmo/addatt/mo_surf/id_side/vint/scalar/nelements cmo/select mo_surf settets/normal assign_color_normal epsilon for zero: 1.0000000E-15 496576 out of 844928 element colors changed. cmo/copyatt/mo_surf mo_surf/id_side itetclr 844928 copied from mo_surf itetclr to -> mo_surf id_side cmo/printatt/mo_surf/id_side/minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH id_side 1 6 5 844928 # this was previous convention, use settets convention instead. # so that top is now 2 and 1 is bottom, etc. # the settets convention is more widely used # cmo / setatt / mo_surf / id_side / eltset get etop / 1 # cmo / setatt / mo_surf / id_side / eltset get ebot / 2 # cmo / setatt / mo_surf / id_side / eltset get efro / 3 # cmo / setatt / mo_surf / id_side / eltset get ebac / 4 # cmo / setatt / mo_surf / id_side / eltset get elef / 5 # cmo / setatt / mo_surf / id_side / eltset get erig / 6 define/FILENAME/fs_3_rig.faceset define/SS_ID/3 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 38400 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 806528 ELEMENTS rmpoint/element/eltset get e_delete Dudded 456905 points plus parents, and 806528 elements removed. rmpoint/compress 456905 points removed and 0 elements removed. The new point count is 39673. The new element count is 38400. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_4_bac.faceset define/SS_ID/4 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 36096 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 808832 ELEMENTS rmpoint/element/eltset get e_delete Dudded 459039 points plus parents, and 808832 elements removed. rmpoint/compress 459039 points removed and 0 elements removed. The new point count is 37539. The new element count is 36096. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_5_lef.faceset define/SS_ID/5 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 33792 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 811136 ELEMENTS rmpoint/element/eltset get e_delete Dudded 461464 points plus parents, and 811136 elements removed. rmpoint/compress 461464 points removed and 0 elements removed. The new point count is 35114. The new element count is 33792. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_6_fro.faceset define/SS_ID/6 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 39936 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 804992 ELEMENTS rmpoint/element/eltset get e_delete Dudded 455450 points plus parents, and 804992 elements removed. rmpoint/compress 455450 points removed and 0 elements removed. The new point count is 41128. The new element count is 39936. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_1_bot.faceset define/SS_ID/1 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 348352 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 496576 ELEMENTS rmpoint/element/eltset get e_delete Dudded 321629 points plus parents, and 496576 elements removed. rmpoint/compress 321629 points removed and 0 elements removed. The new point count is 174949. The new element count is 348352. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish define/FILENAME/fs_2_top.faceset define/SS_ID/2 infile output_faceset.mlgi # assume attribute id_side has faceset id numbers # SS_ID is defined in driver command file cmo/copy/mo_tmp/mo_surf cmo/select/mo_tmp eltset/e_keep/id_side/eq/SS_ID THE ELTSET e_keep HAS 348352 ELEMENTS eltset/e_delete/not/e_keep THE ELTSET e_delete HAS 496576 ELEMENTS rmpoint/element/eltset get e_delete Dudded 321629 points plus parents, and 496576 elements removed. rmpoint/compress 321629 points removed and 0 elements removed. The new point count is 174949. The new element count is 348352. # make sure to remove all attributes except idelem1 and idface1 cmo/DELATT/mo_tmp/itetclr0 cmo/DELATT/mo_tmp/idnode0 cmo/DELATT/mo_tmp/idelem0 cmo/DELATT/mo_tmp/facecol cmo/DELATT/mo_tmp/itetclr1 cmo/DELATT/mo_tmp/idface0 cmo/DELATT/mo_tmp/id_side cmo/DELATT/mo_tmp/layertyp dump/avs2/FILENAME/mo_tmp/0 0 0 2 WARNING: dump/avs iopt_points= 0 WARNING: dump/avs iopt_elements= 0 WARNING: dump/avs iopt_values_node= 0 WARNING: dump/avs iopt_values_elem= 2 WARNING: dump/avs will produce non-standard AVS output that WARNING: read/avs may not be able to read. cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/tmp_faceset.gmv mo_tmp cmo/modatt/-def-/-def-/ioflag/x finish cmo/delete/mo_tmp Released Mesh Object: mo_tmp finish ## CHECK that top number of faces = bottom = layer # this version layer has number of elements = 6272 ############################ # write some informational files and output dump/gmv/surf_sides.gmv/mo_surf cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_surf -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 496578 scalar 1 1 0 1 vector 3 3 0 1 nnodes 496578 496578 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 844928 844928 0 1 mbndry 16000000 16000000 0 1 ndimensions_topo 2 2 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 10 10 0 1 edges_per_element 12 12 0 1 faces_per_element 10 10 0 1 isetwd 0 0 0 496578 ialias 0 0 0 496578 imt1 1 1 0 496578 itp1 0 2 2 496578 icr1 0 0 0 496578 isn1 0 0 0 496578 xic 4.459000015E+01 2.180899963E+02 1.734999962E+02 496578 yic 4.240127182E+01 2.005397644E+02 1.581384926E+02 496578 zic -1.000000000E+00 4.997776985E+00 5.997776985E+00 496578 xtetwd 0 0 0 844928 itetclr 1 6 5 844928 itettyp 3 4 1 844928 itetoff 0 2683004 2683004 844928 jtetoff 0 2683004 2683004 844928 itet 0 496578 496578 844928x* jtet 0 8449274 8449274 844928x* epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilona 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 epsilonv 9.999999939E-09 9.999999939E-09 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 496578 496578 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 ymin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 ymax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 zmax 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 itetclr0 0 0 0 844928 itetclr1 1 30 29 844928 idnode0 1 16970053 16970052 496578 idelem0 0 0 0 844928 idelem1 1 33441792 33441791 844928 facecol 1 6 5 844928 idface0 0 0 0 844928 idface1 1 5 4 844928 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 496578 ielemclr 30 31 1 496578 ncon50 0 0 0 1 nconbnd 0 0 0 1 0 length attribute: icontab id_side 1 6 5 844928 cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 16970053 scalar 1 1 0 1 vector 3 3 0 1 nnodes 16970053 16970053 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 33441792 33441792 0 1 mbndry 610000000 610000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 16970053 ialias 0 0 0 16970053 imt1 1 6 5 16970053 itp1 0 10 10 16970053 icr1 0 0 0 16970053 isn1 0 0 0 16970053 xic 4.459000015E+01 2.180899963E+02 1.734999962E+02 16970053 yic 4.240127182E+01 2.005397644E+02 1.581384926E+02 16970053 zic -1.000000000E+00 4.997776985E+00 5.997776985E+00 16970053 xtetwd 0 0 0 33441792 itetclr 1 30 29 33441792 itettyp 7 7 0 33441792 itetoff 0 200650746 200650746 33441792 jtetoff 0 167208955 167208955 33441792 itet 1 16970053 16970052 33441792x6 jtet 2 777208957 777208955 33441792x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 5.214314870E-11 5.214314870E-11 0.000000000E+00 1 epsilona 1.224487286E-08 1.224487286E-08 0.000000000E+00 1 epsilonv 3.653992092E-08 3.653992092E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 16970053 16970053 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 4.459000015E+01 4.459000015E+01 0.000000000E+00 1 ymin 4.240127182E+01 4.240127182E+01 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 2.180899963E+02 2.180899963E+02 0.000000000E+00 1 ymax 2.005397644E+02 2.005397644E+02 0.000000000E+00 1 zmax 4.997776985E+00 4.997776985E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 16970053 ielemclr 30 31 1 16970053 mat_orig 1 6 5 33441792 ikey_utr 1 33441792 33441791 33441792 cmo printatt mo_pri -xyz- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH xic 4.459000015E+01 2.180899963E+02 1.734999962E+02 16970053 yic 4.240127182E+01 2.005397644E+02 1.581384926E+02 16970053 zic -1.000000000E+00 4.997776985E+00 5.997776985E+00 16970053 cmo select mo_pri quality volume itetclr QUALITY TOTALS for 7 MATERIALS: ........................................................... eltset/-etmp-/itetclr/eq/1/ THE ELTSET -etmp- HAS 696704 ELEMENTS finish epsilonvol: 3.6539921E-08 --------------------------------------- VOLUMES for ELEMENT COLOR 1 ........................... element volumes b/w 0.1673E-03 and 0.2619E-03: 1616 element volumes b/w 0.2619E-03 and 0.4099E-03: 25036 element volumes b/w 0.4099E-03 and 0.6414E-03: 406251 element volumes b/w 0.6414E-03 and 0.1004E-02: 260619 element volumes b/w 0.1004E-02 and 0.1571E-02: 3182 min volume = 1.6734173E-04 max volume = 1.5710226E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/2/ THE ELTSET -etmp- HAS 3135168 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 2 ........................... element volumes b/w 0.3347E-03 and 0.5238E-03: 7272 element volumes b/w 0.5238E-03 and 0.8197E-03: 112671 element volumes b/w 0.8197E-03 and 0.1283E-02: 1828089 element volumes b/w 0.1283E-02 and 0.2008E-02: 1172799 element volumes b/w 0.2008E-02 and 0.3142E-02: 14337 min volume = 3.3469144E-04 max volume = 3.1419703E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/3/ THE ELTSET -etmp- HAS 3135168 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 3 ........................... element volumes b/w 0.3347E-03 and 0.5238E-03: 7272 element volumes b/w 0.5238E-03 and 0.8197E-03: 112671 element volumes b/w 0.8197E-03 and 0.1283E-02: 1828151 element volumes b/w 0.1283E-02 and 0.2008E-02: 1172745 element volumes b/w 0.2008E-02 and 0.3142E-02: 14329 min volume = 3.3469144E-04 max volume = 3.1420452E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/4/ THE ELTSET -etmp- HAS 2090112 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 4 ........................... element volumes b/w 0.3347E-03 and 0.5238E-03: 4848 element volumes b/w 0.5238E-03 and 0.8197E-03: 75114 element volumes b/w 0.8197E-03 and 0.1283E-02: 1218726 element volumes b/w 0.1283E-02 and 0.2008E-02: 781866 element volumes b/w 0.2008E-02 and 0.3142E-02: 9558 min volume = 3.3469144E-04 max volume = 3.1419703E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/5/ THE ELTSET -etmp- HAS 4936758 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 5 ........................... element volumes b/w 0.4184E-03 and 0.6291E-03: 11605 element volumes b/w 0.6291E-03 and 0.9459E-03: 105132 element volumes b/w 0.9459E-03 and 0.1422E-02: 1941629 element volumes b/w 0.1422E-02 and 0.2139E-02: 2804249 element volumes b/w 0.2139E-02 and 0.3216E-02: 74143 min volume = 4.1836230E-04 max volume = 3.2156110E-03 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/6/ THE ELTSET -etmp- HAS 15994629 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 6 ........................... element volumes b/w 0.1478E-02 and 0.2329E-02: 36255 element volumes b/w 0.2329E-02 and 0.3670E-02: 565333 element volumes b/w 0.3670E-02 and 0.5783E-02: 9151198 element volumes b/w 0.5783E-02 and 0.9112E-02: 6190539 element volumes b/w 0.9112E-02 and 0.1436E-01: 51304 min volume = 1.4783647E-03 max volume = 1.4357568E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish eltset/-etmp-/itetclr/eq/30/ THE ELTSET -etmp- HAS 3453253 ELEMENTS finish --------------------------------------- VOLUMES for ELEMENT COLOR 30 ........................... element volumes b/w 0.4184E-03 and 0.8485E-03: 12795 element volumes b/w 0.8485E-03 and 0.1721E-02: 1378590 element volumes b/w 0.1721E-02 and 0.3490E-02: 667517 element volumes b/w 0.3490E-02 and 0.7079E-02: 1174779 element volumes b/w 0.7079E-02 and 0.1436E-01: 219572 min volume = 4.1836230E-04 max volume = 1.4357568E-02 eltset/-etmp-/delete/ ELTSET -etmp- DELETED finish --------------------------------------- SUMMARY VOLUME/AREA of ELEMENT COLORS for mo_pri 1 7 ........................................................... Color Num. Elements Volume Fractional Volume 1 696704 0.4259782E+03 0.003611925 2 3135168 0.3833804E+04 0.032507322 3 3135168 0.3833814E+04 0.032507408 4 2090112 0.2555869E+04 0.021671548 5 4936758 0.7405076E+04 0.062788600 6 15994629 0.8838223E+05 0.749404391 30 3453253 0.1149986E+05 0.097508806 Total elements: 33441792 Total Volume: 0.1179366E+06 ----------------------------------------------------------- 33441792 total elements evaluated. ############################ # write final mesh with multi material and all facesets # node imt does not seem to be included in exo files dump/exo/mesh_fsets.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3 _rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset ExodusII: Start writing to file: mesh_fsets.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 16970053 number of elements: 33441792 number of edges: 0 number of edge blocks: 0 number of element blocks: 7 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 6 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets.exo using cmo: mo_pri dump/avs2/mesh_fsets.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish ############################ # version with single material and top faceset only cmo setatt mo_pri itetclr 1 33441792 values reset for attribute itetclr cmo setatt mo_pri imt 1 16970053 values reset for attribute imt1 resetpts itp geniee finish dump/exo/mesh_fsets_1mat.exo/mo_pri///facesets fs_1_bot.faceset fs_2_top.faceset fs_3_rig.faceset fs_4_bac.faceset fs_5_lef.faceset fs_6_fro.faceset ExodusII: Start writing to file: mesh_fsets_1mat.exo using cmo: mo_pri cmo/set_id/mo_pri/element/e_num_temp cmo/addatt/mo_pri e_num_temp/VINT/scalar/nelements/linear/permanent//0 finish finish sort/mo_pri/index/ascending/ikey_utr/itetclr/e_num_temp cmo/DELATT/mo_pri/ikey_utr finish cmo/addatt/mo_pri/ikey_utr/vint/scalar/nelements///gax/0 finish SORT: order key written to attribute: ikey_utr finish cmo/DELATT/mo_pri/e_num_temp finish cmo/modatt/mo_pri/itetclr/ioflag/lga finish INITIALIZE exodus Title: LAGRIT TO EXODUS number of dimension: 3 number of nodes: 16970053 number of elements: 33441792 number of edges: 0 number of edge blocks: 0 number of element blocks: 1 number of face blocks: 0 number of node sets: 0 number of edge sets: 3 number of element sets: 0 number of side sets: 6 number of face sets: 0 number of node maps: 0 number of edge maps: 0 number of face maps: 0 number of element maps: 0 cmo/modatt/mo_pri/itetclr/ioflag/l finish ExodusII: Done writing to file: mesh_fsets_1mat.exo using cmo: mo_pri dump/avs2/mesh_fsets_1mat.inp/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish dump/gmv/mesh_fsets_1mat.gmv/mo_pri cmo/modatt/-def-/-def-/ioflag/x finish cmo printatt mo_pri -all- minmax ATTRIBUTE NAME MIN MAX DIFFERENCE LENGTH -def- 0.000000000E+00 0.000000000E+00 0.000000000E+00 16970053 scalar 1 1 0 1 vector 3 3 0 1 nnodes 16970053 16970053 0 1 nedges 0 0 0 1 nfaces 0 0 0 1 nelements 33441792 33441792 0 1 mbndry 610000000 610000000 0 1 ndimensions_topo 3 3 0 1 ndimensions_geom 3 3 0 1 nodes_per_element 6 6 0 1 edges_per_element 9 9 0 1 faces_per_element 5 5 0 1 isetwd 0 0 0 16970053 ialias 0 0 0 16970053 imt1 1 1 0 16970053 itp1 0 10 10 16970053 icr1 0 0 0 16970053 isn1 0 0 0 16970053 xic 4.459000015E+01 2.180899963E+02 1.734999962E+02 16970053 yic 4.240127182E+01 2.005397644E+02 1.581384926E+02 16970053 zic -1.000000000E+00 4.997776985E+00 5.997776985E+00 16970053 xtetwd 0 0 0 33441792 itetclr 1 1 0 33441792 itettyp 7 7 0 33441792 itetoff 0 200650746 200650746 33441792 jtetoff 0 167208955 167208955 33441792 itet 1 16970053 16970052 33441792x6 jtet 1 610000000 609999999 33441792x5 epsilon 1.000000004E-15 1.000000004E-15 0.000000000E+00 1 epsilonl 5.214314870E-11 5.214314870E-11 0.000000000E+00 1 epsilona 1.224487286E-08 1.224487286E-08 0.000000000E+00 1 epsilonv 3.653992092E-08 3.653992092E-08 0.000000000E+00 1 ipointi 1 1 0 1 ipointj 16970053 16970053 0 1 idebug 0 0 0 1 itypconv_sm 1 1 0 1 maxiter_sm 25 25 0 1 tolconv_sm 1.000000000E+00 1.000000000E+00 0.000000000E+00 1 nnfreq 1 1 0 1 ivoronoi 1 1 0 1 iopt2to2 2 2 0 1 xmin 4.459000015E+01 4.459000015E+01 0.000000000E+00 1 ymin 4.240127182E+01 4.240127182E+01 0.000000000E+00 1 zmin -1.000000000E+00 -1.000000000E+00 0.000000000E+00 1 xmax 2.180899963E+02 2.180899963E+02 0.000000000E+00 1 ymax 2.005397644E+02 2.005397644E+02 0.000000000E+00 1 zmax 4.997776985E+00 4.997776985E+00 0.000000000E+00 1 kdtree_level 0 0 0 1 max_number_sets 64 64 0 1 number_of_psets 0 0 0 1 number_of_eltsets 0 0 0 1 number_of_fsets 0 0 0 1 layertyp -2.000000000E+00 2.000000000E+00 4.000000000E+00 16970053 ielemclr 30 31 1 16970053 mat_orig 1 6 5 33441792 ikey_utr 1 33441792 33441791 33441792 finish LaGriT successfully completed